Adaptec 2126600 - DuoConnect For Notebooks 1422 Bedienungsanleitung

Adaptec AUA-1422

DuoConnect for Notebooks

User’s Guide

reproduced, stored in a retrieval system, or transmitted in any form or by any

means, electronic, mechanical, photocopying, recording or otherwise, without the

prior written consent of Adaptec, Inc., 691 South Milpitas Blvd., Milpitas, CA 95035.

Trademarks

Adaptec and the Adaptec logo are trademarks of Adaptec, Inc., which may be

registered in some jurisdictions.

Windows 2000 and Windows XP are trademarks of Microsoft Corporation in the US

and other countries, used under license.

FireWire is a registered trademark of Apple Computer, Inc., used under license.

All other trademarks are the property of their respective owners.

Changes

The material in this document is for information only and is subject to change

without notice. While reasonable efforts have been made in the preparation of this

document to assure its accuracy, Adaptec, Inc. assumes no liability resulting from

errors or omissions in this document, or from the use of the information contained

herein.

Adaptec reserves the right to make changes in the product design without

reservation and without notification to its users.

Disclaimer

IF THIS PRODUCT DIRECTS YOU TO COPY MATERIALS, YOU MUST HAVE

PERMISSION FROM THE COPYRIGHT OWNER OF THE MATERIALS TO AVOID

VIOLATING THE LAW WHICH COULD RESULT IN DAMAGES OR OTHER

REMEDIES.

Adaptec Customer Support

If you have questions about installing or using your Adaptec product, check this

document first—you will find answers to most of your questions here. If you need

further assistance, use the support options listed below.

Technical Support Identification (TSID) Number

■Before contacting Technical Support, you need your unique 12-digit TSID

number. The TSID number identifies your product and support status.

■The TSID number is included on a white, bar-coded label, like the example

below.

Support Options

■Search the Adaptec Support Knowledgebase (ASK) at ask.adaptec.com for

articles, troubleshooting tips, and frequently asked questions for your product.

■For support via e-mail, submit your question to Adaptec's Technical Support

Specialists at ask.adaptec.com.

■

To order Adaptec products, including accessories and cables, call +1 408-957-7274.

Or, you can order cables online at www.adaptec.com/buy-cables.

Europe

■Visit our Web site at www.adaptec-europe.com.

■German: Search the Adaptec Support Knowledgebase (ASK) at

ask-de.adaptec.com for articles, troubleshooting tips, and frequently asked

questions for your product.

For support via e-mail, submit your question to Adaptec's Technical Support

Specialists at ask-de.adaptec.com.

■

French:

Search the Adaptec Support Knowledgebase (ASK) at

ask-fr.adaptec.com

for articles, troubleshooting tips, and frequently asked questions for your product.

For support via e-mail, submit your question to Adaptec's Technical Support

Specialists at ask-fr.adaptec.com.

■

English:

Search the Adaptec Support Knowledgebase (ASK) at

ask.adaptec.com

for articles, troubleshooting tips, and frequently asked questions for your product.

For support via e-mail, submit your question to Adaptec's Technical Support

Specialists at ask.adaptec.com.

■To order Adaptec products, including accessories and cables, go to

www.adaptec.com/buy-cables.

Japan

■Search the Adaptec Support Knowledgebase (ASK) at ask.adaptec.co.jp.

■Visit our Web site at www.adaptec.co.jp.

iii

Limited 5-Year Hardware Warranty

1. Adaptec, Inc. (“Adaptec”) warrants to the purchaser of this product that it will be free from

defects in material and workmanship for a period of five (5) years from the date of purchase.

If the product should become defective within the warranty period, Adaptec, at its option,

will repair or replace the product, or refund the purchaser’s purchase price for the product,

Software License Agreement

PLEASE READ CAREFULLY: THE USE OF THIS SOFTWARE IS SUBJECT TO THE SOFTWARE

LICENSE TERMS OF ADAPTEC, INC. AND OTHER LICENSORS WHOSE SOFTWARE MAY

BE BUNDLED WITH THIS PRODUCT.

BY YOUR USE OF THE SOFTWARE INCLUDED WITH THIS PRODUCT YOU AGREE TO THE

LICENSE TERMS REQUIRED BY THE LICENSOR OF THAT SOFTWARE, AS SET FORTH

DURING THE INSTALLATION PROCESS. IF YOU DO NOT AGREE TO THE LICENSE

TERMS APPLICABLE TO THE SOFTWARE, YOU MAY RETURN THE ENTIRE UNUSED

PRODUCT FOR A FULL REFUND.

In return for acquiring a license to use the Adaptec software, which may include software from

third party licensors and patches made available by Adaptec (“Software”), and the related

documentation, you agree to the following terms and conditions:

1. License. This Agreement grants you, the Licensee, a license to:

a. Use the Software on a single computer system, which is not intended for use by more

than five (5) users; and:

b. Make one copy of the Software in machine readable form solely for back-up purposes,

provided you reproduce Adaptec's copyright proprietary legends. Notwithstanding the

foregoing, the Software may be used on the home, laptop or other secondary computer

of the principal user of the Software, and an additional copy of the Software may be

made to support such use. As used in this license, the Software is “in use” when it is

either loaded into RAM or installed on a hard disk or other permanent memory device.

The Software may be “in use” on only one computer at any given time. (Different license

terms and fees are applicable for networked or multiple user applications.) As a specific

condition of this license, you agree to use the Software in compliance with all applicable

laws, including copyright laws, and that you will not copy, transmit, perform or

distribute any audio or other content using the Software without obtaining all necessary

licenses or permissions from the owner of the content.

2. Restrictions. You may not distribute copies of the Software to others or electronically

transfer the Software from one computer to another over a network. You may not post or

otherwise make available the Software, or any portion thereof, in any form, on the Internet.

You may not use the Software in a computer service business, including in time sharing

applications. The Software contains trade secrets and, in order to protect them, you may not

decompile, reverse engineer, disassemble, or otherwise reduce the Software to a human-

perceivable form. YOU MAY NOT MODIFY, ADAPT, TRANSLATE, RENT, LEASE, LOAN,

RESELL FOR PROFIT, DISTRIBUTE, NETWORK OR CREATE DERIVATIVE WORKS

BASED UPON THE SOFTWARE OR ANY PART THEREOF.

3. Ownership of Software. As Licensee, you own the media upon which the software is

recorded or fixed, but Adaptec and its licensors retain title and ownership of the Software

recorded on the original media and all subsequent copies of the Software, regardless of the

form or media in which or on which the original and other copies may exist. This license is

not a sale of the Software or any copy.

4. Confidentiality. You agree to maintain the Software in confidence and that you will not

disclose the Software to any third party without the express written consent of Adaptec. You

further agree to take all reasonable precautions to preclude access of unauthorized persons

to the Software.

5. Term. This license is effective until January 1, 2045, unless terminated earlier. You may

terminate the license at any time by destroying the Software (including the related

documentation) together with all copies or modifications in any form. Adaptec will have the

right to terminate our license immediately if you fail to comply with any term or condition

of this Agreement. Upon any termination, including termination by you, you must destroy

the Software (including the related documentation), together with all copies or

modifications in any form.

6. Special Terms Applicable to Databases. Where a database is included with the Software, you

acknowledge that it is licensed only in connection with the use of the Software to perform

disc creation, and that the database and all data derived therefrom must be maintained in

confidence in accordance with the provisions of Section 4. This license does not grant you

any rights to distribute or disclose such database or data.

7. Limited Warranty. Adaptec and its Licensor warrant only that the media upon which the

Software is furnished will be free from defects in material or workmanship under normal

use and service for a period of thirty (30) days from the date of delivery to you. ADAPTEC

AND ITS LICENSORS DO NOT AND CANNOT WARRANT THE PERFORMANCE OR

RESULTS YOU MAY OBTAIN BY USING THE SOFTWARE OR DOCUMENTATION. THE

FOREGOING STATES THE SOLE AND EXCLUSIVE REMEDIES ADAPTEC AND ITS

LICENSORS WILL PROVIDE FOR BREACH OF WARRANTY. EXCEPT FOR THE

FOREGOING LIMITED WARRANTY, ADAPTEC AND ITS LICENSORS MAKE NO

WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED, AS TO

NON-INFRINGEMENT OF THIRD PARTY RIGHTS, MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE. Some states do not allow the exclusion of implied

warranties or limitations on how long an implied warranty may last, so the above

limitations may not apply to you. This warranty gives you specific legal rights and you may

also have other rights which vary from state to state.

8. The entire liability of Adaptec and its licensors, and your exclusive remedy for a breach of

this warranty, shall be:

a. The replacement of any media not meeting the above limited warranty which is

returned to Adaptec; or:

b. if Adaptec or its distributor is unable to deliver replacement media which is free from

defects in materials or workmanship, you may terminate this Agreement by returning

the Software and your money will be refunded.

9. Limitation of Liability. IN NO EVENT WILL ADAPTEC OR ITS LICENSORS BE LIABLE TO

YOU FOR ANY INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES,

INCLUDING ANY LOST PROFITS, LOST SAVINGS, OR LOSS OF DATA, EVEN IF

ADAPTEC OR A LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY. Some states do not allow the

exclusion or limitation of special, incidental, or consequential damages, so the above

limitation or exclusion may not apply to you.

10. Export. You acknowledge that the laws and regulations of the United States and other

countries may restrict the export and re-export of the Software. You agree that you will not

export or re-export the Software or documentation in any form in violation of applicable

United States and foreign law.

11. Government Restricted Rights. The Software is subject to restricted rights as follows. If the

Software is acquired under the terms of a GSA contract: use, reproduction or disclosure is

subject to the restrictions set forth in the applicable ADP Schedule contract. If the Software is

acquired under the terms of a DoD or civilian agency contract, use, duplication or disclosure

by the Government is subject to the restrictions of this Agreement in accordance with

48 C.F.R. 12.212 of the Federal Acquisition Regulations and its successors and 49 C.F.R.

227.7202-1 of the DoD FAR Supplement and its successors.

12. General. You acknowledge that you have read this Agreement, understand it, and that by

using the Software you agree to be bound by its terms and conditions. You further agree that

it is the complete and exclusive statement of the agreement between Adaptec and you, and

supersedes any proposal or prior agreement, oral or written, and any other communication

between Adaptec and you relating to the subject matter of this Agreement. No additional or

any different terms will be enforceable against Adaptec unless Adaptec gives its express

consent, including an express waiver of the terms of this Agreement, in writing signed by an

officer of Adaptec. You assume full responsibility for the use of the Software and agree to

use the Software legally and responsibly. This Agreement shall be governed by California

law, except as to copyright matters, which are covered by Federal law. This Agreement is

deemed entered into at Milpitas, California by both parties. Should any provision of this

Agreement be declared unenforceable in any jurisdiction, then such provision shall be

deemed severable from this Agreement and shall not affect the remainder hereof. All rights

in the Software not specifically granted in this Agreement are reserved by Adaptec.

Should you have any questions concerning this Agreement, you may contact Adaptec by

writing to:

Adaptec, Inc.

Legal Department

691 South Milpitas Boulevard

Milpitas, California 95035

Regulatory Compliance Statements

Federal Communications Commission Radio Frequency Interference Statement

WARNING: Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and

can radiate radio frequency energy, and if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. However, if this

equipment does cause interference to radio or television equipment reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

■Reorient or relocate the receiving antenna.

■Increase the separation between equipment and receiver.

■Connect the equipment to an outlet on a circuit different from that to which the receiver is

connected.

■Consult the dealer or an experienced radio/television technician for help.

■Use a shielded and properly grounded I/O cable and power cable to ensure compliance of

this unit to the specified limits of the rules.

This device complies with part 15 of the FCC rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference and (2) this device must accept

any interference received, including interference that may cause undesired operation.

European Union Compliance Statement

This Information Technology Equipment has been tested and found to comply with

EMC Directive 89/336/EEC, as amended by 92/31/EEC and 93/68/EEC, in

accordance with:

■EN55022 (1998) Emissions

■EN55024 (1998) Immunity:

➐EN61000-4-2 (1998) Electrostatic discharge: ±4 kV contact, ±8 kV air

➐EN61000-4-3 (1998) Radiated immunity

➐EN61000-4-4 (1995) Electrical fast transients/burst: ±1 kV AC, ±0.5 kV I/O

➐EN61000-4-5 (1995) Surges ±1 kV differential mode, ±2 kV common mode

➐EN61000-4-6 (1996) Conducted immunity: 3 V

➐EN61000-4-11 (1994) Supply dips and variation: 30% and 100%

In addition, all equipment requiring U.L. listing has been found to comply with EMC

Directive 73/23/EEC as amended by 93/68/EEC in accordance with EN60950 with

amendments A1, A2, A3, A4, A11.

Canadian Compliance Statement

This Class B digital apparatus meets all requirements of the Canadian Interference-

Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur

le matériel brouilleur du Canada.

Adaptec, Inc. AUA-1422

Tested to Comply

With FCC Standards

FOR HOME OR OFFICE USE

In this Guide

This User’s Guide explains how to install your AUA-1422

DuoConnect for Notebooks adapter and its associated drivers,

describes how to connect your AUA-1422 DuoConnect for

Notebooks to a USB device and a digital video camera, and

contains an overview of USB and 1394 (FireWireTM) technology.

Kit Contents

Your Adaptec DuoConnect for Notebooks kit includes:

■Adaptec AUA-1422 DuoConnect for Notebooks adapter

■DuoConnect for Notebooks CD containing device drivers and

the DuoConnect for Notebooks User’s Guide

■Adaptec DuoConnect for Notebooks Installation Guide

Kit Contents 1

System Requirements 2

Installation Overview 2

Inserting the Adapter 3

Connecting Devices 12

Removing the Adapter 15

Troubleshooting 16

About USB Devices 17

About 1394 Technology 18

System Requirements

To use your DuoConnect for Notebooks adapter, you need a

PC-compatible notebook computer with:

■Pentium II processor or equivalent (400 MHz or faster)

■Microsoft Windows 2000®or Windows XP®

■Available CardBus slot

■CD-ROM or DVD-ROM drive

Installation Overview

You install your DuoConnect for Notebooks in three simple steps:

1Insert the DuoConnect for Notebooks adapter. (See page 3.)

2Install the device drivers. (See page 4.)

3Connect your devices. (See page 12.)

Inserting the Adapter

To successfully install your DuoConnect for Notebooks adapter:

1Power on your computer, if you haven’t already.

2Disconnect any devices that are connected to the adapter.

3Carefully insert the adapter into the CardBus slot of your

computer, as shown.

4Insert the DuoConnect for Notebooks CD into your CD-ROM

drive, if you haven’t done so already.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Adaptec Laptop-Zubehör Handbücher

Adaptec

Adaptec DuoConnect AUA-1422 Bedienungsanleitung

Beliebte Laptop-Zubehör Handbücher anderer Marken

BenQ

BenQ LaptopBar NB21 Bedienungsanleitung

Rocstor

Rocstor Y1RB022-B1 Handbuch

Panasonic

Panasonic CF-VEBU05BU Bedienungsanleitung

KLIM

KLIM Mistral Bedienungsanleitung

Xbrand

Xbrand Lap Lounge XB-1010-XX Bedienungsanleitung

StarTech.com

StarTech.com LTRISERP Bedienungsanleitung

Surefire

Surefire PORTUS X2 Bedienungsanleitung

Humanscale

Humanscale L6 Bedienungsanleitung

HP OmniBook 2100 Bedienungsanleitung

Gamber Johnson

Gamber Johnson 7160-0250 Bedienungsanleitung

Manhattan

Manhattan 303088 Bedienungsanleitung

Rocstor

Rocstor PrivacyView Handbuch

Twelve South

Twelve South BookArc Bedienungsanleitung

Dicota

Dicota Secret Bedienungsanleitung

Tecknet

Tecknet N9 Bedienungsanleitung

Fujitsu

Fujitsu Stylistic CE CT2000 Series Bedienungsanleitung

XMG

XMG OASIS Bedienungsanleitung

Thanko

Thanko SUPER GORONE Bedienungsanleitung