Adaptec 5325301580 Bedienungsanleitung
Quick Start Guide and User CD
Kurzanleitung und Benutzer-CD
Guía de iniciación rápida y CD del usuario
Guide de mise en route rapide et CD de l’utilisateur
About This Guide
This guide shows you how to quickly install and connect your Snap Server to the network. Prior to the installation,
gather all the hardware components required for your system:
1 Check the contents of your shipment package for all the items shown in Hardware Features.
• If installing a Snap Server 4500 with a Snap Disk 10, also check the contents of your Snap Disk 10
packaging.
• If installing a Snap Server 15000, also check the contents of your Snap Disk 30SA packaging.
2 Gather any optional components needed to complete your system as described next in Optional Hardware
Components.
Optional Hardware Components
Depending on your chosen conguration, you may need to acquire one or more of the following components
prior to proceeding with the installation. Snap Appliance recommends an APC-Brand UPS device for protection
against power uctuations, and a SCSI tape backup device for regular backups to protect your data. You can
learn how to purchase any of these components from your authorized Snap Appliance reseller or from the Where
to Buy section of the Snap Appliance Web site (http:// www.snapappliance.com).
Component Description
Serial ATA Card (4500 only) You must install a Serial ATA card on each Snap Server 4500
whose capacity you want to expand by connecting with Snap
Disk 10 expansion array.
The Serial ATA card has two ports, allowing you to attach up to
two expansion arrays. The card is available from an authorized
Snap Appliance reseller.
Tape Backup Device(s) and Cables To attach a tape device via a SCSI connection to the Snap Server,
you need a 68-pin Ultra160-LVD cable. For a list of compatible
backup solutions, see the Backup section in the Support section of
the Snap Appliance Web site.
Tip Depending on your server hardware conguration, you
may need to purchase and install a SCSI card, available from an
authorized Snap Appliance reseller.
APC-brand UPS device Snap Servers are designed to work with a network-based, APC-
brand UPS. Visit the APC Web site for a listing of optimal APC
models for use with your Snap Server.
Rack Snap Servers are designed for use with EIA-compliant racks. You
can use either a two-post telco-style rack or a four-post rack.
Non-compliant racks may not be able to support the server
using only the front posts. If you are using a non-EIA rack, Snap
Appliance recommends that you secure the server using slide
rails, available from an authorized Snap Appliance reseller.
Labels Many of the hardware installation procedures in this guide
recommend labeling the hardware for easy reference.
Hardware Features
1 Quick Start Guide 8 Server number label 15 Service connector
2 Power button 9 Serial number label 16 PCI expansion slots (two)
3 System status lights 10 Stacking clips (four) 17 Rack mount screws (ten)
4 Release latches (two) 11 Hot-swappable disk drives (four) 18 Rack mount brackets (ears)
5 Disk drive status lights 12 Reset button (white) 19 Backup Software
6 Primary Ethernet port 13 Front bezel 20 Ethernet cables
7 Secondary Ethernet port 14 Power connector 21 Power cables
Note
The monitor, USB, keyboard, and mouse connectors are not needed to administer the Snap Server.
These connectors are disabled
Version 7.1
NetVault
TM
for GuardianOS
TM
Client Software Installation Guide
7
Installing the Server in a Rack
The Snap Server ships with two L-shaped rack mount brackets. You can attach them in one of two ways: (1) to the
front of the server for mounting to the front posts of a four-post rack; or, (2) to the middle or front of the server for
mounting to both posts of a Telco rack.
Caution The following procedure applies to standard EIA racks; other racks may not be able to support the
server using only the front posts. If you are using a non-EIA rack, Snap Appliance recommends that you secure
the server using slide rails, available from Snap Appliance or a Snap Appliance reseller.
1 Make sure you have the following items necessary for rack installation:
• Two (left and right) front rack
mounting brackets
• Six rack ear screws to attach the
brackets to the server
• Four rack mounting screws to
attach the brackets to the rack
posts
• One Phillips screwdriver
2 If mounting the L-shaped brackets to the
front of the server (as shown in the illustration),
use the six screws provided. (If mounting to the middle
of the server (not shown) for installation into a Telco rack, only four
screws are used.)
3 Insert the server into the rack and attach the server to the posts using the remaining four screws. You may need
a second person to support the server while tightening the mounting screws.
Tip For slide rail installation instructions, see the documentation on the CD that comes with the slide rail
installation hardware kit.
Connecting the Server to the Network
The server has Dual-Gigabit Ethernet ports that can connect to 10BaseT, 100BaseTx, or 1000BaseT networks. A
dual-port conguration offers added advantages, such as load balancing and failover. You may connect one or
both of the ports.
• If you connect only one port, you must use the primary port marked ‘1’ on the back of the server as shown in
the Hardware Features Illustration.
• To take advantage of network bonding (load balancing or failover), both ports must be physically connected to
the network; and (a) for load balancing, connected to the same switch on the same subnet; or (b) for failover,
connected to different switches on the same subnet (in case one switch fails).
Caution The speed/duplex setting on Snap Servers defaults to autonegotiate. The networking switch or hub
to which the server is connected must also be congured to autonegotiate; otherwise, network throughput or
connectivity to the server may be seriously impacted.
Cabling the Server to the Network
Use the provided Ethernet cables to connect the server to the network. When you connect the network cables to
active ports, the network lights on the bezel (LAN 1 and LAN 2) are green.
Connecting the Power Cord
As a data security measure, Snap Appliance strongly recommends you connect the Snap Server to the power
source via a UPS. Use the provided power cord to connect the server to plug the server into a UPS or properly
grounded electrical outlet.
Tip Snap Servers are designed to work with APC-brand, network-based UPS devices. You must congure the
APC unit both in the Snap Server ’s Administration Tool and in the APC user interface.
Powering On the Snap Server
To turn on the server, press the power button on the front of the server. The server
takes a few minutes to initialize. A green LED indicates that the system is on.
Tip If connecting a Snap Disk 10 or Snap Disk 30SA expansion array, use the
array’s quick start guide to install and connect the array before powering on the
Snap Server.
Connecting to the Snap Server for the First Time
Snap Servers are preset to acquire an IP address from a DHCP server. If no DHCP server is found on the network,
the Snap Server defaults to an IP address of 10.10.10.10, and you may not be able to see the server on your
network. You can discover a Snap Server using either the default server name or the Snap Server Manager (SSM)
utility. Use the server name method if you are installing one Snap Server on the network. Use SSM if you are
installing two or more Snap Servers, or if your network does not have a DHCP server.
To Connect to a Snap Server Using the Server Name
This procedure requires that name resolution services (via WINS or an equivalent service) be operational.
1 Find the server name.
The default server name is SNAPnnnnnn, where nnnnnn is the server number. For example, the name of a
Snap Server with a server number of 610019 is SNAP610019. The server number is a unique, numerics-only
string that appears on a label afxed to the inside of your Snap Server. To view the label, remove the front
bezel.
2 In a Web browser, enter the following URL:
http://SNAPnnnnnn (where nnnnnn is the server number)
3 Press Enter. The Web View screen opens.
4 Log into the Administration Tool and complete the Initial Setup Wizard.
Click the administration link, and in the login dialog box, enter admin as the user name and admin as the
password, and then click OK. Complete the setup procedure using the Initial Setup Wizard.
To Connect to a Snap Server Using Snap Server Manager
Snap Server Manager (SSM) is a Java-based, platform-independent, multiserver administrative application
that runs on all major platforms. Administrators can discover, congure, and monitor all local and remote
GuardianOS Snap Servers from the SSM interface. You can download and install Snap Server Manager using the
Install.html le found on your Snap Server User CD. Be sure to install SSM on a computer residing on the same
network segment as your Snap Server(s).
1 Launch SSM.
SSM discovers all Snap Servers on its local network segment and displays their server names, IP addresses,
and other status information in the main console.
Tip To distinguish multiple Snap Servers you may
need to nd their default server names as explained
in the previous procedure.
2 Launch a Server’s Administration Tool.
In the Snap Server Manager console, right-click a
server name and select Launch Web Administration,
as shown in the illustration.
3 Log into the Administration Tool and complete the
Initial Setup Wizard.
Click the administration link, and in the login dialog
box, enter admin as the user name and admin as the
password, and then click OK. The rst screen of the
Initial Setup Wizard opens.
Copyright © 2003 Snap Appliance, Inc. All rights reserved worldwide.
All other product names or company names are the property of their
respective owners.
Copyright © 2003 Snap Appliance, Inc. Alle Rechte weltweit
vorbehalten. Alle anderen Produktnamen und Firmennamen sind
Eigentum der jeweiligen Unternehmen.
Copyright © 2003 Snap Appliance, Inc. Reservados todos los derechos
en el ámbito internacional. Todos los otros nombres de productos o de
compañías son propiedad de susrespectivos priopietarios.
Copyright © 2003 Snap Appliance, Inc. Tous droits réservés dans
le monde entier. Tous les autres noms de produit ou de société
appartiennent à leurs détenteurs respectifs.
Snap Appliance
2001 Logic Drive
San Jose, CA 95124 USA
888.310.SNAP (7627)
www.snapappliance.com
70990625-002 Rev. A
User CD
Obtaining Service
To obtain service or technical support for your
Snap Server, please visit our Web site at
http://www.snapappliance.com, or call 1-888-338-SNAP.
For immediate response to a service inquiry, you can submit a question to our
technical support department using our Expert Knowledge Base System
http://www.snapappliance.com/support
Technischen Service
Sie finden den technischen Service oder Kundendienst für Ihren Snap Server auf unserer Website. Wenn Kunden
sofortige Antworten auf eine Serviceanfrage wünschen, können sie mit Hilfe unseres Expert Knowledge Base System
http://www.snapappliance.com/support
Obtención de servicio de asistencia
Para obtener servicio o asistencia técnica para su Snap Server, visite nuestro sitio Web. Para obtener respuesta
inmediata a su solicitud de asistencia, envíelas en la forma de preguntas a nuestro Sistema experto de base de
conocimiento en http://www.snapappliance.com/support
Obtention d‘un entretien
Pour un entretien ou une assistance technique concernant votre Snap Server, vérifiez notre site
web. Pour obtenir une réponse immédiate à une demande de service, vous pouvez envoyer
une question à notre service d‘assistance technique en utilisant notre système de base
de connaissances experte http://www.snapappliance.com/support
Inhaltsverzeichnis
Andere Adaptec Netzwerkspeicherserver Handbücher
Adaptec
Adaptec 5325301841 Bedienungsanleitung
Adaptec
Adaptec 5325302055 Bedienungsanleitung
Adaptec
Adaptec Snap Server 110 Bedienungsanleitung
Adaptec
Adaptec 5325301573 Bedienungsanleitung
Adaptec
Adaptec Snap Server 700i Series Bedienungsanleitung
Adaptec
Adaptec 5325301638 - Snap Server 4500 NAS Service-Handbuch
Adaptec
Adaptec 5325301508 Bedienungsanleitung
Adaptec
Adaptec 2069300 - File Saver ESA1500 NAS Server Bedienungsanleitung
Adaptec
Adaptec 5325301654 Bedienungsanleitung
Adaptec
Adaptec 5325301719 Bedienungsanleitung
Adaptec
Adaptec 5325301507 - Snap Server 4400 NAS Service-Handbuch
Adaptec
Adaptec 5325301728 - Snap Server 4200 NAS Bedienungsanleitung
Adaptec
Adaptec Storage Manager Bedienungsanleitung
Adaptec
Adaptec 5325301656 - Snap Server 14000 NAS Service-Handbuch
Adaptec
Adaptec 5325301553 Bedienungsanleitung
Adaptec
Adaptec 5325302057 - Snap Server 750i NAS Bedienungsanleitung
Adaptec
Adaptec 5325301846 - Snap Server 4500 NAS Bedienungsanleitung
Adaptec
Adaptec 5325301843 Bedienungsanleitung
Adaptec
Adaptec 5325302053 - Snap Server 720i NAS Bedienungsanleitung
Adaptec
Adaptec 5325301570 - Snap Server 1100 NAS Bedienungsanleitung
Beliebte Netzwerkspeicherserver Handbücher anderer Marken
HP
HP NetStorage 6000 Bedienungsanleitung
Seagate
Seagate U10 ST320423A Bedienungsanleitung
Synology
Synology RackStation RS816 Handbuch
D-Link
D-Link ShareCenter Pro DNS-1200-05 Bedienungsanleitung
Avid Technology
Avid Technology VideoRAID ST Sicherheitsleitfaden
Western Digital
Western Digital My Cloud Home Duo Bedienungsanleitung
PrimeArray
PrimeArray 4xxx Bedienungsanleitung
Buffalo
Buffalo TeraStation WSS WSH5010N6 Bedienungsanleitung
Planex
Planex MZK-NAS01SG Bedienungsanleitung
Intel
Intel SS4000-E - Entry Storage System NAS Server Bedienungsanleitung
Synology
Synology RS2212+ Bedienungsanleitung
Allnet
Allnet ALL69000 Bedienungsanleitung
