Adayo DV7B01 Bedienungsanleitung

DVD/CD/VCD/MP3/WMA/USB PLAYER

BLUETOOTH WITH FM/AM TUNER

DV7B01

Operation Instructions

1. Only connect this unit to a 12V DC power

supply with negative grounding.

2. Never install this unit where the operation

for safety driving is restrained.

3. Never use the video display function in the

front when driving to prevent the violation

of laws & regulations and also to reduce

the risk of trafc accident except using the

rear view video camera.

4. Never expose this unit, amplier, speakers

to moisture or water to prevent electronic

sparks or res.

Warnings

5. Please don't change the fuse in the power

cord without professional guidance,

improper fuse may cause damage to this

using unit or even cause re.

6. Please power off this unit at once and send

it back to the after-sales service center or

the dealer / distributor you purchased from

if one of the following symptoms is found:

(a) No audio output;

(b) No image output;

(d) Smoking;

(e) Peculiar smell.

7. To ensure safe driving, please adjust the

volume to a safe and comfort level in case

of emergency situations.

Precautions

1. Never disassemble or adjust the unit

without any professional guide. For

details, please consult any professional car

shop / dealer for inquiry.

2. If the front panel or TFT monitor is squalid,

please use a clean silicone cloth and

neutral detergent to wipe off the spot.

Using a rough cloth and non-neutral

detergent such as alcohol for cleaning may

result in scratching or decoloration to the

applicant.

3. If any abnormal behavior of the unit is

found, please refer to trouble shooting

guide of this manual. If no relevant

information is found,please press the

[RESET] key on the front panel to resume

factory default.

4. If you have parked the car in hot or cold

weather for a long time, please wait until

the temperature in the car becomes normal

before operating the unit.

5. Using in-car heater in low temperature

environment may result in beads coagulate

inside the unit, Do not use the unit in this

situation, eject the disc and wipe off the

bead on the disc. If the unit still doesn't

work after a few hours, please contact with

after-sales service center.

6. No erce impact to the LCD monitor when

it is in open position for preventing the

damage to any mechanisms inside.

7. To prevent the damage to the screen,

avoid touching it with sharp objects.

8. The monitor employs auto motorizing

mechanism, please don't push, pull, or

swivel the monitor manually to prevent

damage to the core mechanism.

9. To provide a clear demonstration and an

alternative for easy understanding to the

operation of this unit, graphic illustrations

areused.However, these illustrations are

some different from the actual images

displayed on the screen.

10.During operating the unit, “ ” will

display if the current operation is not

available or illegal.

11.Operate the unit correctly according to this

manual to prevent unnecessary problem.

The guarantee won't be valid if the problem

is caused by inappropriate operation.

Declaration

This product incorporates copyright protection

technology that is protected by U.S patents

and other intellectual property rights. Use of

this copyright protection technology must be

authorized by Macrovision, and is intended

for home and other limited viewing uses only

unless otherwise authorized by Macrovision.

Reverse engineering or disassembly is

prohibited.

Cautions of disc using

1. DO NOT use irregular shaped disc

2. Disc Cleaning

Use a dry, soft cloth to wipe the disc from

center to edge, only neutral detergent can

be used.

3. When playing a new disc

New disc may have some rough spots

around the inner and outer edges. If such

a disc is used, remove these rough spots

with a pencil or ball-point pen, etc.

Contents

Before using

Front panel ............................................. 1

Remote Control ...................................... 2

Basic operations

Power on / off......................................... 4

Audible beep conrmation...................... 4

Mute ....................................................... 4

Open SOURCE MENU .......................... 4

Playing source selection ........................ 4

Volume adjustment................................. 4

Using the TFT Monitor ........................... 4

System reset .......................................... 4

Change aspect ratio............................... 4

Image settings........................................ 4

Radio mode

Select radio as playing source ............... 5

Select one radio band ............................ 5

Tune ....................................................... 5

Manual tuning......................................... 5

Preset station ......................................... 5

Search Stations Automatically................ 5

EQ Selection .......................................... 5

Playback

Insert a disc............................................ 6

Eject the disc.......................................... 6

Touch screen controls ............................ 6

Controlling Playback .............................. 6

Connect an USB Device ........................ 6

Play ........................................................ 6

Pause..................................................... 6

Stop........................................................ 6

Previous/Next......................................... 6

Search for a Folder ................................ 6

Repeat playback .................................... 7

Repeat A-B............................................. 7

Shufe (Random) Play........................... 7

PBC function .......................................... 7

Select Audio Mode ................................. 7

Select Subtitle Language ....................... 7

Change Viewing Angle ........................... 7

Playback Information.............................. 8

For DVD ................................................. 8

For VCD ................................................. 8

Elapsed Time ......................................... 8

Direct Track Entry................................... 8

Rotate Pictures....................................... 8

Zoom ...................................................... 8

Other modes

Listen to Other Devices.......................... 9

Camera .................................................. 9

Steering Wheel Control Programming ... 9

Setup

Display System .................................... 10

Adjust General Settings ....................... 10

Adjust Video Settings........................... 10

Adjust Time Settings .............................11

Adjust Audio settings.............................11

Adjust Language Settings .....................11

Adjust DVD Rating ............................... 12

Adjust Volume Settings ........................ 12

Select Preset Equalizer........................ 13

Adjust EQ Parameters ......................... 13

Adjust FAD BAL .................................. 13

Troubleshooting ....................................... 13

Device connections

Notes of connection ........................... 16

Control Cables ..................................... 16

Region Code ....................................... 16

Parking Brake Cable Connections ..... 17

Reverse Driving Cable Connections .... 17

Installation and uninstall

Notes of installation.............................. 18

Installation procedures ......................... 18

Remove the unit .................................. 18

Trim ring installation ............................. 18

Trim ring uninstall ................................ 18

Specications ........................................... 19

Appendix

FCC Statement .................................... 20

FCC Radiation Exposure Statement.... 20

Wiring Diagram ......................................... 21

EN - 1

Before using

Front panel

1. Disc slot

2. Reset the unit

3. [VOL / / ] Knob: Unit power / Adjust volume / Mute audio outputs

4. [SRC] Key: Switch to the current source and the main menu

5. [ ] Key: Auto search / Next / Move cursor to the right

6. [TILT+] Knob: Increase the display angle

7. [OPEN/CLOSE] Key: Open / Close the TFT monitor

8. [TILT-] Knob: Decrease the display angle

9. [ ] Key: Auto search / Previous / Move cursor to the left

10.USB Slot

11. AV IN jack

12.Eject disc

཰

ཱ

ི

ཱི ུ ཱུ ྲྀ ཷ ླྀ ཹ ེ

ཻ

EN - 2

Note:

Your remote control may differ

slightly from the one pictured here.

The above diagram is for illustrative

purpose only.

Before using

Remote Control

1. [SRC]Key:select playing source

2. [EJECT]Key: Eject disc

3. [AUDIO] Key: Select audio channel

4. [VOL+/-] Key: Adjust volume

5. [ZOOM] Key: Image zoom in/out

6. [ /BAND] Key: Select radio band / Fast

playback / Slow playback

7. [WIDE] Key: Change display mode

8. [PRESET / ] Key: Select preset radio

station

9. [EQ] Key: Enter/Exit the EQ setting

10.[GOTO] Key: GOTO search

11.[OPEN/CLOSE] Key: Open / Close the

TFT monitor

12.

[TILT / ] Key: Adjusting display tilting angle

13.[RPT A-B] Key: A-B repeat

14.[RPT] Key: Repeat playback

15.[MUTE] Key: Mute audio outputs

16.[POWER] Key: Unit power

17.[SUBTITLE] Key: Select DVD subtitle

language

18.[ANGLE] Key: Select view angle

19.[MENU] Key: DVD MENU / PBC

20.[TITLE] Key: DVD TITLE

21.[SETUP] Key: Setup menu

22.[ ] Key: Fast Forward / Move cursor up

23.[ ] Key: Auto search / Next / Move

cursor to the right

24.[ ] Key: Play / Pause / Enter

25.[ ] Key:Auto search / Previous / Move

cursor to the left

26.[PIC] Key: Image setting

27.

[ ] Key: Fast Reverse/ Move cursor down

28.[ ] Key: Stop Playback

29.[DISP/CLEAR] Key: Display information /

Clear information

30.[0~9] Key: Numeric keys

31.[RDM] Key: Random playback

32.[INT] Key: Intro playback

EN - 3

Before using

Notes of remote control using

1) Aim the remote control at the remote

sensor on the unit.

2) Remove the battery from the remote

control or insert a battery insulator if the

battery has not been used for a month or

longer.

3) DO NOT store the remote control under

direct sunlight or in high temperature

enviro nment, or it may not f unction

properly.

4) The battery can work for 6 months under

normal condition. If the remote control can't

work, please change the battery.

5) Use “button shaped” lithium battery

“CR2025” (3V) only.

6) DO NOT recharge, disassemble, heat or

expose the battery in re.

7) Insert the battery in proper direction

according to the (+) and (-) poles.

8) Store the battery in a place where children

cannot reach to avoid the risk of accident.

Uninstall Battery

Slide out the battery compartment

tray at the bottom on the back of the

remote control.

Install Battery

Use button-shaped lithium battery

“CR2025 (3V)” only. Insert the

battery to the battery tray with proper

direction according to the (+) and (-)

poles.

EN - 4

Basic operations

Power on / off

Press the [ ] key to turn the unit on. The

buttons on the front of the unit light up and

the current mode status appears on the LCD.

Press the [ ] key to power off the unit.

Audible beep conrmation

An audible beep tone conrms each function

selection. The Beep tone can be disabled

through the Setup menu.

Mute

Press the volume knob on the front panel or

press the [MUTE] key on the remote control

to mute the volume from the unit.

Open SOURCE MENU

Press the [SRC] key on the front panel or

remote control or touch the top left corner of

the screen to open the SOURCE MENU.

Do the above operation again to return to the

original source.

Playing source selection

Open the SOURCE MENU, and then touch

the source you desired or select one source

by moving the cursor and then conrm.

Volume adjustment

Volume Increase/Decrease

To increase or decrease the volume level,

turn the rotary encoder on the front panel.

When the volume level reaches "0" or "50", a

beep sounds, indicating that the adjustment

limit has been reached. The TFT screen

displays the volume level for 3 seconds.

Programmable turn-on volume

This feature allows the user to select a turn-

on volume setting regardless of the volume

setting prior to turning the unit off. To program

a specic turn-on volume level, turn the rotary

encoder to adjust the volume to the desired

turn-on volume. Push and hold the rotary

encoder while the blue speaker icon and level

indication is displayed on the screen. The

unit will beep to conrm your turn-on volume

setting.

Using the TFT Monitor

Open / Close monitor

Press the [OPEN/CLOSE] key on the front

panel or remote control topush the display

panel out or in.

Change the monitor tilt angle

Due to the inherent character of LCD, you

will get different vision impressions when you

watch it from different angles.

The display angle of this unit can be changed;

hence you can select the best angle where

you can get the best vision impression.

Press the [TILT] key on the display panel or

the remote control to adjust the tilt angle one

step at a time.

Press and hold the [TILT] key on the display

panel or the remote control to adjust the tilt

angle continuously.

System reset

To correct a system halt or other illegal

operation, use the tip of a pen to press the

[RESET] key located on the panel. After a

system reset, the unit restores all factory

default settings.

Note:

If the unit is reset while a DVD is playing,

the DVD resumes play once the reset is

complete.

Change aspect ratio

Press the [WIDE] key on the remote control

to adjust the aspect ratio.

Image settings

1. Enter image setting mode

Press the [PIC] key on the remote control.

2. Select one item to adjust

Touch the [ ]/[ ] icon on the user

interface to adjust the value.

3. Exit image setting mode

To exit image setting mode, repeat the rst

step or stop operation for some seconds.

EN - 5

Radio mode

Select radio as playing source

Open the SOURCE MENU and then touch

[Radio].

Select one radio band

Press the [BAND] key on the remote control

or touch the [ ] icon on the user interface

to select one radio band among FM1, FM2,

FM3, AM1 and AM2.

Tune

Auto tuning

Press the [ ] / [ ] key on the remote

control or touch the [ ] / [ ] icon on the

user interface to seek a higher / lower station.

To stop searching, repeat the operation above

or press other keys having radio functions.

Note:

When a station is received, searching stops

and the station is played.

Manual tuning

Method 1:

During manual tuning, the frequency will be

changed in steps.

Touch the [ ] / [ ] icon on the user

interface to tune in a higher / lower station.

Method 2:

1. Touch the numeric keypad icon [ ].

Numeric keyboard is displayed, touch

numbers to input frequency.

2. Touch [ ] to delete the input numbers

step by step.

3. Touch [ OK ] to enter.

Preset station

The unit has 5 bands, such as FM1, FM2,

FM3, AM1, AM2, and each band can store 6

stations; hence the unit can store 30 stations

in total.

Manual store

1. Tune to a station.

2. Touch and hold one of the channels 1 to 6

to save the selected band.

Search Stations Automatically

Touch [ ] to search station and store

the 6 strongest stations in the current band

automatically.

Recalling a station

1. Select a band (if needed).

2. Touch an on-screen preset button to select

the corresponding stored station.

Local radio station seeking (LOC)

When the Local function is on, only radio

stations with a strong local radio signal are

played. To activate the Local function in

the AM/FM tuner mode, touch [ ] on the

screen. The Options tab is revealed. Touch

[ ] icon and choose the Radio Local or

Distance. When the Local function is active,

the LOC indicator at the top of the screen

is illuminated. When the Distant function

is active, the DX indicator at the top of the

screen is illuminated.

EQ Selection

Touch the [ ] icon and enter the EQ setup.

EN - 6

Playback

Insert a disc

Upon inserting a disc, the unit will switch to

[DISP] mode automatically.

Notes:

1. Please confirm whether there is a disc in

the unit before you insert another one.

2. Some recorded discs, such as CD-R, CD-

RW, DVD-R, DVD+R, DVD-RW, DVD+RW

cannot be played back because of different

recording status. Otherwise, the discs

without being closed could not be played

back.

3. About the cautions of disc using, please

refer to the appendix.

4. Don’t pledge to be compatible with all disc.

Eject the disc

Press the [ ] key on the front panel or

remote control to eject the disc.

Touch screen controls

The touch key areas for DVD playback are

outlined below:

A: Return to the main menu

B: Disc type

C: Time display

D: Play the video and display playback

information

E: Display onscreen control menu

Controlling Playback

To access the on-screen controls, touch the

screen anywhere except for the upper left

corner and touch again to cancel display.

Connect an USB Device

1. Open the USB door.

2. Connect an USB device into the USB

connector. Play starts automatically.

Notes:

1. If there are audio files supported in the

USB stick, the system will enter the audio

les menu automatically.

If there are no audio files, but there are

video files supported in the USB stick,

the system will enter the video les menu

automatically.

If there are no audio or video files, but

there are picture les supported in the USB

stick, the system will enter the picture les

menu automatically.

If there no above audio/video/picture les

supported in the USB stick, the screen will

display: There are no audio/video/picture

les supported.

2. Not all kinds of USB devices are

compatible with the unit.

Play

Once a disc, or a USB device is inserted, play

starts automatically.

Pause

When play the audio/vedio file, press the

[ ] key on the remote control or open the

on-screen control icons menu and then touch

the [ ] icon, press the [ ] again and

continue to play.

Stop

For audio les or video les, press the [■] key

on the remote control or open the on-screen

control icons menu and then touch the [■]

icon to stop. Press the [ ] to resume from

the pausing point.

Touch the [■] icon again to stop entirely, and

press the [■] key on the remote control. Press

the [ ] to playback from the top le.

Previous/Next

Touch [ ] / [ ] key on the screen to skip

to previous / next track / chapter.

Search for a Folder

For Folder Control

1. Touch [ ] to display all available folders.

2. Touch a folder, then touch the desired le.

3. Touch the le again to start play.

Inhaltsverzeichnis

Andere Adayo Medienplayer Handbücher

Adayo

Adayo FORYOU RN56H8 Bedienungsanleitung

Beliebte Medienplayer Handbücher anderer Marken

Visual Land

Visual Land Impulse Bedienungsanleitung

limHD

limHD 200i Bedienungsanleitung

Transcend

Transcend DMP10 Bedienungsanleitung

Philips

Philips GoGear Muse SA2MUS08 Bedienungsanleitung

Fantec

Fantec MM-HDRL Bedienungsanleitung

Dune HD

Dune HD Duo 4K Bedienungsanleitung

IAdea

IAdea HMP-505S Bedienungsanleitung

Camos

Camos MMS-1000 Bedienungsanleitung

Energy

Energy 75 Series Bedienungsanleitung

Z3 Technology

Z3 Technology DME-03 Bedienungsanleitung

Sony

Sony SVR-2000 Benutzerhandbuch

Meicheng

Meicheng HD-1080K12 Bedienungsanleitung

DENAFRIPS

DENAFRIPS ARCE Bedienungsanleitung

Topaz

Topaz CMS Media Player Gebrauchsanweisung

InFocus

InFocus LightCast Bedienungsanleitung

IconBiT

IconBiT XDS1003D Bedienungsanleitung

Quanmax

Quanmax QDSP-2090 Series Bedienungsanleitung

Samsung

Samsung MP-80S Bedienungsanleitung