ADC LoopStar 780 Bedienungsanleitung

www.adc.com • +1-952-938-8080 • 1-800-366-3891

Spec Sheet

LoopStar®780

Flexible Multi-service Solution for Packet-based Cell Site Backhaul

There is major shift taking place in the mobile backhaul space. Voice and data traffic are increasing

exponentially across cellular networks with a corresponding increase in the number of cell towers

and the transport networks. Providers are seeking ways to reduce network and transport costs by

supporting a strategy designed to move away from a TDM-based transport network towards a

packet network. To this end, more fiber is being pulled to cell tower locations and more Ethernet

services are being added to mobile networks. ADC’s LoopStar® 780 is ideally suited to address

the challenges of wireless carriers in this transition. Deployed at the cell tower, the cost efficient

LoopStar 780 can be used to provide standards-based circuit emulation services that allow TDM

trunks to be backhauled over an Ethernet-based network, while simultaneously supporting IP

Multimedia services to cellular users. This multi-service capability is the heart of the LoopStar 780.

The LoopStar 780 features and benefits:

• Provide cost-efficient transport of voice and data across a packet-based infrastructure

• Support legacy and next generation voice and data services

• Extend Quality of Service capabilities into the access network

• Integrate with copper, fiber, cable and radio infrastructures

• Incorporate standards-based SAToP pseudowire technology, along with full support for business-

class Ethernet services

• Low cost platform enhances the business case for cell tower installation

• Temperature hardened to adapt to a variety of environments

The LoopStar 780 offers up to eight (8) ports of Structured Agnostic Transport over Packet

Switched Networks (SAToP) for T1/E1 support. IP services are supported by four (4) subscriber-

facing 10/100 Ethernet ports and one 100FX port. The WAN interfaces are flexible, offering

both copper and fiber based backhaul solutions for 100/1000TX copper and 100FX/GigE fiber.

Additionally, the WAN interfaces offer dual uplinks for redundancy.

ADC’s LoopStar 780 was designed from the ground up as a carrier class device. It incorporates

field proven pseudowire technology, along with full support for business-class Ethernet services.

Additionally, as a temperature hardened and Telcordia NEBS Level 3 certified product, the LoopStar

780 is suitable for deployment in a wide range of environments and locations. Other carrier class

features include: redundant hot swappable power supplies, BITS timing input, alarm outputs and

EdgeAware™, a comprehensive suite of Intelligent Management and Control tools designed for

the multi-service edge.

Spec Sheet

Web Site: www.adc.com

From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080

Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our web site.

ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101

Specifications published here are current as of the date of publication of this document. Because we are continuously

improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may

verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.

views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products orfeatures

contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer

Powerful Ethernet Service Management

• EdgeAware intelligent management

• Traffic separation via VLAN switching

• 802.1p prioritization

• 802.1q VLAN tagging/stacking

• Rate limiting / TOS classification

• In-band management

• Layer 2 (RMON) stats

• Hands-free Ethernet cable test

• 802.3ad link aggregation

Circuit Emulation Services

• SAToP T1/E1 TDM Pseudowire

• CESoPSN T1/E1 TDM Pseudowire (future)

• Configurable Jitter Buffer

Management

• Local 10/100 (GUI)

• In-band (Web and SNMP)

• SNMP v1, v2

• HTTPS

• T1/E1 Loopbacks

• Real time clock

• Syslog

Built-in Interfaces

• Eight T1/E1 ports

• Four 10/100 Base-T ports

• (Customer facing)

- Ethernet ports can also be used to cascade to a

second LoopStar 780

• One 100FX (Customer or Network facing)

• Two GigE SFPs (Customer or Network facing)

• Two 100/1000TX (Customer or Network facing)

• BITS Clock Input (CESoPSN only)

• Ethernet local management port

• Telemetry

- Three output relays

- Three input points

Physical

• 1.75” (4.445cm) high x17” (43.18cm) wide x

7.25” (18.45cm) deep

• ETSI compliant, full frontal access

• Wall mount or rack mount

• Dual DC power supplies: -48VDC (-40 to -60VDC)

or 24VDC

• AC power option

• Temperature Hardened -40° to 65° C

• UL 60950, IEC60950

• FCC Part 15 – Class A

• CE Mark

• RoHS Compliant

• NEBS Level 3 Certified

Specifications

Ordering Information

Description Catalog Number

Loopstar 780 with single DC power supply LPS-780-DC L1

Loopstar 780 with dual DC power supply LPS-780-DC L2

Loopstar 780 with single AC power supply LPS-780-AC L1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ADC Netzwerk-Hardware Handbücher

ADC

ADC Soneplex P-61-743 Bedienungsanleitung

ADC

ADC GPRS Support Node GGSN & SGSN WAVE.GSN Bedienungsanleitung

ADC

ADC H2TU-C-202 Bedienungsanleitung

ADC

ADC HiGain HDU-404 LIST 2 Original Betriebsanleitung

ADC

ADC Migration Modules DSX-3 Bedienungsanleitung

ADC

ADC UltraWAVE GSM Network-In-A-Box 105968AE Bedienungsanleitung

ADC

ADC HiGain HLU-200 Bedienungsanleitung

ADC

ADC HiGain HDSL2 Bedienungsanleitung

ADC

ADC Digivance NXD Handbuch

ADC

ADC H4TU-C-319 List 1 Line Unit Original Betriebsanleitung

ADC

ADC PG-PLUS PLL-733 Bedienungsanleitung

ADC

ADC PG-FLEXPLUS PMU-712 Bedienungsanleitung

ADC

ADC PG-Flex FLC-704 Bedienungsanleitung

ADC

ADC Campus-RS REX2 Bedienungsanleitung

ADC

ADC Plug-and-Play Cassettes RMG Systemhandbuch

ADC

ADC H2TU-C-202 Bedienungsanleitung

ADC

ADC HiGain HDSL2 Bedienungsanleitung

ADC

ADC H2TU-C-202 Original Betriebsanleitung

ADC

ADC H4TU-C-388-L1 Bedienungsanleitung

ADC

ADC HiGain H2TU-R-402 Original Betriebsanleitung

ADC

ADC HiGain HTC-439 List 2 Test Card Bedienungsanleitung

ADC

ADC HiGain H2TU-C-319 List 4E Original Betriebsanleitung

ADC

ADC HiGain HDSL2 Bedienungsanleitung

ADC

ADC H2TU-C-388 HiGain Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung

Lanner

Lanner NCA-1525 Bedienungsanleitung