ADC LSA-PLUS NT Bedienungsanleitung
LSA-PLUS®NT Termination Blocks
www.adc.com • +1-952-938-8080 • 1-800-366-3891
Spec Sheet
Today’s ever-changing network deployments frequently require wires to be reterminated, relocated
or rewired. That rewiring can quickly degrade the quality of wire terminations. ADC has developed
products like the LSA-PLUS®NT block to maintain superior connectivity through hundreds of
reterminations and deliver the best electrical performance in the industry. The LSA-PLUS NT block is
a high–density solution that utilizes the silver plated, world renowned LSA-PLUS contact principle.
Its gas-tight contacts ensure a reliable and long lasting connection.
System side contacts and the cross connections on the LSA-PLUS NT block are situated
perpendicular to one another, increasing pair density while decreasing the chance of accidental
tampering of system side terminations. Both test access and cross–connect contacts are accessible
from the front, and the block can be easily released to access system side contacts for new wiring
or rewiring.
The LSA-PLUS NT block’s unique perpendicular configuration of the system and cross-connect sides
creates additional space. Its vertical mounting pitch of 17.5 mm results in a vertical space savings
of 21% over LSA-PLUS Series 2 solutions.
6/07 • 104619AE LSA-PLUS®NT Termination Blocks
LSA-PLUS®NT Termination Blocks
2
www.adc.com • +1-952-938-8080 • 1-800-366-3891
LSA-PLUS®NT Termination Block
(IDC Orientation)
Features & Benefits
• Utilizes proven reliability of the LSA-PLUS®
45º silver plated contacts
• Unique perpendicular configuration facilitates
quick and reliable installations
• Vertical mounting pitch of 17.5 mm results in
21% space savings over Series 2 blocks
• System side contacts situated at a right angle
on the bottom of the block protect cable
wiring and prevent accidental tampering
during cross–connect work
• Clear labeling system eliminates wiring
mistakes
• Built in “look-both-ways” test port
• Designed for use with ADC back mount
frame; other versions are available for use
with ADC profile rod mount brackets
• Various identification and marking
possibilities: marking caps used to mark
individual pairs, identify special lines or
protect a given line from being mistakenly
switched
• Switchover adapters allow interrupt-
free switchover to a new system, active
equipment or connection of new cables
• One-pair “look-both-ways” test cord with
banana plugs allows for independent testing
of incoming and outgoing signals; no need
for wire removal
• LSA PLUS insertion tool manages all wire
terminations; no need for additional tools
• Wall and rack mountable
• Can be mounted on 19- or 23-inch frames
Applications
• Well suited for applications requiring a
bandwidth greater than POTS
• Offers superior high-speed connections for
voice and data in backbone cabling
• Ideal for next generation broadband
networks that need to support voice, video
and data transmission (IPTV, ADSL2+, VDSL2,
etc)
6/07 • 104619AE LSA-PLUS®NT Termination Blocks
3
www.adc.com • +1-952-938-8080 • 1-800-366-3891
Specifications
MECHANICAL
Wire range for solid copper conductors
(single wire per contact): 0.4 mm to 0.8 mm (26 to 20 AWG)
Wire range for stranded tinned copper conductors
(single wire per contact): 7 x 0.12 mm to 7 x 0.32 mm (36 to 28 AWG)
Two wires per contact (same gauge): 0.4 mm to 0.65 mm (26 to 22 AWG)
Wire insulation diameter range (PE, PVC): 0.7 mm to 1.6 mm (0.02” to 0.06”)
Number of wire terminations: ≥200
Number of disconnect port plug-in cycles: ≥750
ELECTRICAL
NEXT (average worst case performance): 39 dB @ 100 MHz:
Insulation resistance: ≥50 GΩ
Contact resistance: ≤1 mΩ(typical)
Electrical strength / impulse strength: 2 kV / 3.6 kV (8/20 μs)
Operation voltage for basic insulation (B/S): 120 V TNV
Transient overvoltage for B/S insulation: 1.5 kV
Current carrying capacity: 5 A (50 Hz, 1 s)
Impulse current: 5 kA (8/20 μs)
Air gap / creepage: 2.8 mm / 2.93 mm (.11"/.12")
ENVIRONMENTAL AND SAFETY
Safety Compliance: UL 1863
Flammability rating of plastic housing: UL 94 V-0
Storage temperature range: -40° to 90° C (-40° to 194° F)
Operating temperature range: -20° to 80° C (-4° to 176° F)
Telcordia®compliance: Telcordia Technologies TR-NWT-001195,
“Generic Requirements for Insulation
Displacement Connector (IDC) Cross-Connect
Terminal Blocks”, Issue 1, June 1992
MATERIALS
Plastics: PBT
Contact plating: Silver (Ag)
LSA-PLUS®NT Termination Blocks
Cross-Connect Side of Block
Side View
Equipment Side of Block 17.5 mm (0.7")
39.5 mm (1.6")
27.5 mm
(1.1")
112 mm (4.4")
Website: www.adc.com
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080
Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our Website.
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
104619AE 6/07 Original © 2007 ADC Telecommunications, Inc. All Rights Reserved
Spec Sheet
Ordering Information
Description Dimensions (H x W x D) Catalog Number
LSA-PLUS®NT 10-pair;
Disconnect block
Quantity: 1 (Order in multiples of 10)
17.5 mm x 112 mm x 27.5 mm
(.7" x 4.4" x 1.1")
7014 1 004-03
5-position back mount frame with rear cable hole
Quantity: 1
98.3 mm x 92 mm x 50.8 mm
(3.9" x 3.6" x 2")
6655 2 851-05
10-position back mount frame with rear cable hole
Quantity: 1
186 mm x 92 mm x 50.8 mm
(7.3" x 3.6" x 2")
6655 2 851-10
20-position back mount frame with rear cable hole
Quantity: 1
361 mm x 92 mm x 50.8 mm
(14.2" x 3.6" x 2")
6655 2 851-20
30-position back mount frame with rear cable hole
Quantity: 1
536 mm x 92 mm x 50.8 mm
(21.1" x 3.6" x 2")
6655 2 851-30
Accessories
Black NT dummy plug – Quantity: 1 (Order in multiples of 100) 7014 3 049-00
Red NT marking cap – Quantity: 1 (Order in multiples of 100) 6196 3 042-00
Red NT disconnect plug – Quantity: 1 (Order in multiples of 100) 7014 3 021-00
NT 10-pair hinged label holder – Quantity: 1 7014 2 007-00
NT 10-pair label holder – Quantity: 1 7014 2 006-00
NT one-pair site mounted test cord – Quantity: 1
XX = length of test cord in feet
04 = 1.2 m (4'), 07 = 2.1 m (7'), 10 = 3 m (10')
6645 2 126-XX
NT one-pair “look-both-ways” test cord – Quantity: 1
XXX = length of test cord in feet
001 = 0.3 m (1') 004 = 1.2 m (4'), 007 = 2.1 m (7'), 010 = 3 m (10')
ANP-12NBA5-XXX
NT changeover adapter – Quantity: 1 (Order in multiples of 10) 7014 1 044-00
NT to Series 2 one-pair adapter – Quantity: 1 7014 1 014-00
Other NT termination blocks and accessories are available upon request.
Please contact ADC Technical Assistance Center.
Inhaltsverzeichnis
Andere ADC Netzwerk-Hardware Handbücher
ADC
ADC H2TU-C-202 Bedienungsanleitung
ADC
ADC HIGAIN H2TU-R-402-L7A1 Original Betriebsanleitung
ADC
ADC ADCP-90-216 Bedienungsanleitung
ADC
ADC Migration Modules DSX-3 Bedienungsanleitung
ADC
ADC PG-PLUS PLL-723 Bedienungsanleitung
ADC
ADC HiGain H2TU-C-231 Original Betriebsanleitung
ADC
ADC High Density Position Panel LSX 288 Bedienungsanleitung
ADC
ADC UniPatch GigE Series Bedienungsanleitung
ADC
ADC UltraWAVE 2000 Bedienungsanleitung
ADC
ADC HiGain H2TU-C-231 Original Betriebsanleitung
ADC
ADC HiGain H2TU-C-231 Bedienungsanleitung
ADC
ADC ETP-64 Bedienungsanleitung
ADC
ADC LoopStar 750 Bedienungsanleitung
ADC
ADC LoopStar 1600 Bedienungsanleitung
ADC
ADC HiGain H2TU-C-231 Original Betriebsanleitung
ADC
ADC LPS-H2C-L7A Original Betriebsanleitung
ADC
ADC Baluns Series Bedienungsanleitung
ADC
ADC Micro BS Plus UltraWAVE Bedienungsanleitung
ADC
ADC HiGain HLU-200 Bedienungsanleitung
ADC
ADC FPL Series Bedienungsanleitung
Beliebte Netzwerk-Hardware Handbücher anderer Marken
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung
Yudor
Yudor YDS-16 Bedienungsanleitung
D-Link
D-Link ShareCenter DNS-320L Bedienungsanleitung
Samsung
Samsung ES1642dc Gebrauchsanweisung
Honeywell Home
Honeywell Home LTEM-PV Montageanleitung
