Addonics Technologies DCHDIES Bedienungsanleitung

Addonics

T E C H N O L O G I E S

Diamond Combo Hard Drive

DCHDSAES & DCHDIES

DCHDIEU & DCHDSAEU

User’s Guide

Version 1.0

FCC Warning Statement

This equipment has been tested and found to comply with the limits for a class B

digital device pursuant to Part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy. If not installed and used in accordance with the instructions, it may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If the

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment on and off, the user is encouraged

to try and correct the interference by one or more of the following suggestions.

Reorient or relocate the receiving antenna

Increase the distance between the equipment and the receiver

Connect the equipment to a different power outlet other than the one where

receiver is connected

Consult a certified television or radio technician

LIMITED WARRANTY

Addonics guarantees that every product is free from physical defects in material

and workmanship during the warranty period specified for each product when used

within the limits set forth in the Specifications section in the user guide.

Unauthorized tampering of the product or using it outside the scope of the

product specifications will result in voiding the warranty. If the product proves

defective during this warranty period, call Addonics Technical Support to obtain a

Return Authorization number. BE SURE TO HAVE YOUR PROOF OF

PURCHASE ON HAND WHEN CALLING. RETURN REQUESTS CANNOT BE

PROCESSED WITHOUT PROOF OF PURCHASE. When returning a product,

mark the Return Authorization number clearly on the outside of the package and

include your original proof of purchase. Customers are responsible for paying the

shipping and handling of the products to Addonics warranty service location.

IN NO EVENT SHALL ADDONICS’ LIABILITY EXCEED THE PRICE PAID FOR

THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE

PRODUCT, ITS ACCOMPANYING SOFTWARE, OR ITS DOCUMENTATION.

Addonics makes no warranty or representation, expressed, implied, or statuary,

with respect to its products or the contents or use of the user guide and all

accompanying software, and specifically disclaims its quality, performance,

merchantability, or fitness for any particular purpose. Addonics reserves the right

to revise or update its products, software, or documentation without obligation to

notify any individual or entity.

Hardware Installation Guide

Step 1

Use a Philips screwdriver to

turn the cover securing

screw into the “OPEN”

position.

Step 2

Slide the aluminum cover

towards the back end of the

Diamond and remove it.

Step 3

For SATA Drive

Carefully place the SATA hard drive

with the label facing up into the

Diamond enclosure. Push the hard

drive towards the back end to secure

the drive connectors onto the

Diamond enclosure’s SATA

connector.

For IDE Drive

Note: Set up your IDE hard drive

as Master device

Connect the 4-Pin Molex cable to

the power connector on the IDE

hard drive. Carefully place the IDE

hard drive with the label facing up

into the Diamond enclosure. Push

the hard drive towards the back end

to secure the drive connectors onto

the Diamond enclosure’s IDE

connector.

Step 4

Turn the Diamond enclosure over

with the hard drive mounting holes

facing up. Use the included flat

head screws to secure the hard

drive onto the bottom of the

enclosure and turn in the screw to

the “LOCK” position.

Cable Connections

Power: Connect the 6-pin Mini DIN power cable (provided) to the 6-pin

Mini DIN power connector located at the back of the enclosure.

Data:

Model: DCHDSAES & DCHDIES

Connect the eSATA to eSATA cable to the eSATA connector located at

the back of the enclosure and the other end of the eSATA cable to the

eSATA connector on your SATA host controller with eSATA ports.

Model: DCHDSAEU & DCHDIEU

Connect the eSATA to eSATA cable to the eSATA connector located at

the back of the enclosure and the other end of the eSATA cable to the

eSATA connector on the USB2.0 to eSATA adapter. You can now plug

the adapter to a USB port on your system.

Powering On Enclosure: To power on the enclosure, move the switch

located at the back of the enclosure to the ON mode. When the switch is

turned on, the LED light beside it would light up to indicate power and

also drive access.

Note: There are no drivers needed to use the eSATA cable as long

as the drivers are installed for the Serial ATA Controller card/chip. It

is plug and play.

eSATA

connector

On / OFF

switch

Mini-Din power

connector

Cable Connections When Used as an Internal Hard Drive

Power: Use either the 4-pin Molex or the 15-pin SATA power connector.

Do not use both power sources simultaneously.

Data:

Connect the SATA cable to the SATA connector located at the back of the drive

cradle and the other end to the SATA connector on your SATA host controller or

onboard SATA port.

LED cable: Only needed if you want to get drive access signal from the SATA

controller. Use the LED cable to connect the LED pin located at the back of the

cradle (beside the LED switch) to the LED jumper pins on your SATA host

controller or onboard SATA port to enable the drive activity LED.

Factory default, LED signal coming from hard drive.

Powering On Drive Cradle: To power on the drive cradle, slide in the Diamond

cartridge and using the key (supplied), turn the cradle lock located at the front of

the cradle to the LOCK position. This will provide power as indicated by the

green LED lighting up and secure the cartridge.

Technical Support

If you need assistance to get your unit functioning properly, please call Addonics

Technical Support. Our technical staff will be happy to assist you, but they will

need your help to do so. Calling the technical support staff without all the proper

information can be both time consuming and frustrating. Here are some tips to

help you out:

MODEL NUMBER –Please have this number on hand.

SYSTEM INFORMATION –Type of computer, peripherals, etc.

OPERATING SYSTEM –What version of Windows

WHAT’S THE TROUBLE? – Give enough information

about your problem so that we can recreate and diagnose it.

FREE Software Drivers for all Addonics Technologies

Products are available 24 hours per day at the

World Wide Web Site: www.addonics.com.

Contact Information

Phone: 408-433-3899

Fax: 408-433-3898

Email: http://www.addonics.com/sales/query/

Internet: http://www.addonics.com

TECHNICAL SUPPORT

Phone: 408-433-3855

Hours: 8:30 am - 6:00 pm PST

Email: http://www.addonics.com/support/query/

Power & Drive

Activity LED

Key Lock Switch

SATA data

connector

LED DISPLAY Switch

LEFT –LED signal from drive

RIGHT –LED signal from controller

SATA power

connector

Dieses Handbuch passt für folgende Modelle

Andere Addonics Technologies Lagerung Handbücher

Addonics Technologies

Addonics Technologies Combo Hard Drive25 IDE Bedienungsanleitung

Addonics Technologies

Addonics Technologies DCDCS256S Bedienungsanleitung

Addonics Technologies

Addonics Technologies Saturn Cipher ExDrive SCEDSAU64 Bedienungsanleitung

Addonics Technologies

Addonics Technologies RCHD256ES Bedienungsanleitung

Addonics Technologies

Addonics Technologies RCHDSAES Bedienungsanleitung

Addonics Technologies

Addonics Technologies ExDrive Bedienungsanleitung

Addonics Technologies

Addonics Technologies External CipherChain Bedienungsanleitung

Addonics Technologies

Addonics Technologies Sapphire Cipher II Snap-In SSN6G-256EU Bedienungsanleitung

Addonics Technologies

Addonics Technologies ST45HPMXA-B Bedienungsanleitung

Addonics Technologies

Addonics Technologies CRT535PES Bedienungsanleitung

Addonics Technologies

Addonics Technologies AD25MSD Bedienungsanleitung

Addonics Technologies

Addonics Technologies NA3MS4HU2B Bedienungsanleitung

Addonics Technologies

Addonics Technologies JCCHDIF128 Bedienungsanleitung

Addonics Technologies

Addonics Technologies RT93SNDHMS Bedienungsanleitung

Addonics Technologies

Addonics Technologies AD25CFASTD Bedienungsanleitung

Addonics Technologies

Addonics Technologies RT3DAHEU3 Bedienungsanleitung

Addonics Technologies

Addonics Technologies CDC5HXAES Bedienungsanleitung

Addonics Technologies

Addonics Technologies RTMPM6G Bedienungsanleitung

Addonics Technologies

Addonics Technologies ST55HPMXU Bedienungsanleitung

Addonics Technologies

Addonics Technologies ST13 Bedienungsanleitung

Addonics Technologies

Addonics Technologies RT5835HMEU Montageanleitung

Addonics Technologies

Addonics Technologies AEMEDUSIB25F Bedienungsanleitung

Addonics Technologies

Addonics Technologies CRC4HESU Bedienungsanleitung

Addonics Technologies

Addonics Technologies AESNAPMRI Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung