Adesso EZScan 2000 Bedienungsanleitung

NuScan 2000 Series

USER'S GUIDE

No warranty of any kind is made in regard to this material, including, but not

limited to, implied warranties of merchantability or fitness for any particular

purpose. We are not liable for any errors contained herein or for incidental or

consequential damages in connection with furnishing, performance or use of this

material. We shall be under no liability in respect of any defect arising from fair

wear and tear, willful damage, negligence, abnormal working conditions, failure to

follow the instructions and warnings, or misuse or alteration or repair of the

products without written approval. No part of this document may be reproduced,

transmitted, stored in a retrieval system, transcribed, or translated into any

human or computer or other language in any form or by any means electronic,

mechanical, magnetic, optical, chemical, biological, manual or otherwise, except

for brief passages which may be quoted for purposes of scholastic or literary

review, without express written consent and authorization. We reserve the right to

make changes in product design without reservation and without notification. The

material in this guide is for information only and is subject to change without

notice. All trademarks mentioned herein, registered or otherwise, are the

properties of their various, ill, assorted owners.

General handling precautions

•Do not dispose of the scanner in fire.

•Do not put the scanner directly in the sun or by any heat source.

•Do not use or store the scanner in a very humid place.

•Do not drop the scanner or allow it to collide violently with other objects.

•Do not take the scanner apart without authorization.

Introduction

The NuScan 2000 Long Range CCD barcode scanners come in three different

models to handle any task. Its flexible architecture gives users three different

configurations to choose from, with different combinations of scan engines and

communications. This means that the scanner gives the users an unsurpassed

combination of flexibility and power; match each user’s needs to a tee.

With their rugged design and ergonomic styling, the scanners offer superior

service life and reduce user fatigue. Scanning performance is the highlight of the

unit, featuring a 3000 pixel CCD and wide services window for unbeatable first

read success rates, in addition to 300 scans per second performance.Ahandy

status LED and programmable beep give users both audio and visual cues about

scan status, further increase accuracy and efficiency.Also, its built-in hardware

decoding capability means the scanner is able to accurately recognize the

world’s more popular barcodes.

Boasting several compatible interfaces and numerous configurations, the

scanner is a powerful handheld scanner without compromise.

Unpacking

The NuScan 2000 Long Range CCD Barcode Scanner package should

contain:

1 ea. NuScan 2000 Long Range

CCD Barcode Scanner

1 ea. Communication Cable

1 ea. Power Adapter

(For Serial Units Only)

1 ea. User's Manual

If any package contents are damaged or missing, please contact:

Adesso Inc.

160 Commerce Way

Walnut, CA 91789

909-839-2929 TEL

909-839-2930 FAX

www.adesso.com

[email protected]

Please leave this Users' Manual within easy access of person using the

scanner.

Finding Your Way Around

When a barcode is successfully decoded, the LED indicator on the top of

the scanner unit flashes green and the buzzer sounds. If not, the LED will

show red and the buzzer is no sound.

Connecting the Cable

1. Align the tab, and plug the cable connector into the cable port in the bottom

of the handle.

2. Twist the bayonet lock to the right to secure.

Connecting to a Host

The Handheld Scanner supports USB, Keyboard Wedge and RS232

communications. Select a Communications Cable appropriate to your

host.

1. Insert the plug on the free end of the Communications Cable into the

appropriate connector on the host.

2. Insert the small plug terminating the PowerAdapter wire into the socket on

the side of the Communications Cable.**

3. Plug the Power Adapter into an outlet. **

** Step 2 & 3 only for RS232 interface

USB Connection

Keyboard Emulation connector

RS-232 Connection with D type 9 Pin Connection

Test Scanning

1. Ensure all connections are secure.

2. Aim the scanner at a barcode within range.Assuming the scanner is in

trigger mode (default), press the trigger.

3. On successful decode, the scanner beeps and the LED flashes green.

Tip

1. Do not hold the scanner directly over a barcode. At 90˚, scanning light can bounce directly back

into the scanner from the barcode area as specular reflection, creating a "dead zone" where

decoding is, at best, difficult. Instead of a 90° head-on approach, tilt the scanner up to 65° forward

or backward to achieve a successful decode. Practice a few times to find what range of angles

works best.

Maintenance

Cleaning the scan window is the only maintenance required.Adirty window may

affect scanning accuracy.

Never use any abrasive material or solvents on the window. Do not spray water

or other cleaning liquids directly onto the window.

Remove dirt by wiping gently with a damp cloth or tissue moistened with water

and/or ammonia.

Trouble Shooting

Problem: Nothing happens when you follow the operating instructions.

Possible Cause Possible Solution

Interface cables are

loose. Check for loose cable connections.

Problem: Light comes on, but symbol does not decode.

Possible Cause Possible Solution

Scanner is not

programmed for the

correct bar-code type.

Be sure the scanner is programmed to

read the type of barcode you are

scanning.

Barcode symbol is

unreadable. Check the symbol to make sure it is not

de-faced. Try scanning test symbols of

the same barcode type.

Distance between

scanner and barcode is

incorrect.

Move the scanner closer to or further

from the barcode.

Problem: Symbol is decoded, but not transmitted to the host.

Possible Cause Possible Solution

Scanner is not

programmed for the

correct host type.

Scan the appropriate host type barcode.

Problem: Scanned data is incorrectly displayed on the host.

Possible Cause Possible Solution

Scanner is not programmed to

work with the host. Check

Handheld Barcode Scanner

Series host type parameters or

editing options.

Be sure proper host type is

selected.

For RS-232, ensure the scanner’s

communication parameters match

the host’s settings.

For keyboard emulation

configuration, ensure the system is

programmed for the correct

keyboard type, and that the CAPS

LOCK key is off.

Be sure editing options (e.g. UPC-

E to UPC-A Conversion) are

properly programmed.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Adesso Barcode-Lesegerät Handbücher

Adesso

Adesso NuScan 5000 Bedienungsanleitung

Adesso

Adesso NUSCAN 3200 series Bedienungsanleitung

Adesso

Adesso NuScan 4000 Bedienungsanleitung

Adesso

Adesso NuScan 7300CR Bedienungsanleitung

Adesso

Adesso NuScan 2100 Series Bedienungsanleitung

Adesso

Adesso NuScan 2100 Series Betriebsanleitung

Adesso

Adesso Nuscan 4300B Bedienungsanleitung

Adesso

Adesso NuScan 6000 Bedienungsanleitung

Adesso

Adesso NuScan 4000 Bedienungsanleitung

Adesso

Adesso NuScan 6000 Bedienungsanleitung

Adesso

Adesso 5100 Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung

Atid

Atid AT188N Plus Bedienungsanleitung

AZENTA

AZENTA 281947 Bedienungsanleitung