ADI Video Technologies MX1 Bedienungsanleitung

-Confidential-

The MX1

Single Decoder Professional

MPEG-2 IRD

QPSK

Operation Manual

www.adi-vt.ru

2



TheMX1‐Multi‐ChannelMPEG2SingleDecoder‐OperationManual

7 Hamarpe St., Jerusalem 91450 Israel; Tel: +972-2-5714011 Fax: +972-2-5714033 info@adi-vt.com

Thank you for purchasing the MX1 Single Decoder MPEG-2 IRD.

This manual has been written to provide all relevant instructions for operating your MX1

Single Decoder MPEG-2 IRD. We recommend that you read these instructions before

attempting to install or operate your MX1 to ensure the maximum benefit to your

customers.

A.D.I. Video Technologies Ltd. believes the information contained in this publication is

accurate as of its latest printing date and reserves the right to make changes in

specifications and information without prior notice. A.D.I. Video Technologies is not

responsible for any inadvertent errors.

The terms and conditions governing the sales of A.D.I. Video Technologies products and the

licensing and use of software consist solely of those set forth in the contracts between

A.D.I. Video Technologies and its customers. No representation or other affirmation of fact

contained in this publication, including but not limited to statements regarding capacity,

response time performance, suitability for use or performance of products described herein

shall be deemed to be a warranty by A.D.I. Video Technologies for any purpose or give rise

to any liability by A.D.I. Video Technologies whatsoever.

In no event shall A.D.I. Video Technologies be liable for any incidental, indirect, or

consequential damages whatsoever (including but not limited to loss of profits) arising out

of or relating to this publication or the information contained in it, even if A.D.I. Video

Technologies has been advised, knew, or should have known of the possibility of such

damages.

The products described in this document are confidential and proprietary of A.D.I. Video

Technologies or its licensors.

No part of his document may be reproduced in any form, including by electronic retrieval

systems, without prior written permission of A.D.I. Video Technologies.

www.adi-vt.ru

3



TheMX1‐Multi‐ChannelMPEG2SingleDecoder‐OperationManual

7 Hamarpe St., Jerusalem 91450 Israel; Tel: +972-2-5714011 Fax: +972-2-5714033 info@adi-vt.com

Table of Contents

About this Manual .........................................................................................5

Organization of this Manual ....................................................................... 5

Conventions Used in this Manual ................................................................ 5

Introduction ..............................................................................................6

Front and Rear Panels............................................................................... 8

Front Panel ........................................................................................................8

Rear Panel ........................................................................................................9

Powering up the MX1...............................................................................10

The Menu System....................................................................................11

Controlling the Menu ........................................................................................... 11

Getting Started................................................................................................... 12

Configuring the Input TS.............................................................................14

Configuring QPSK1 or QPSK2 Input TS .......................................................14

Configuring the IP input TS.......................................................................16

Viewing the ASI 1 or ASI 2 Input TS ..........................................................17

Configuring the Decoder Parameters...........................................................18

Configuring the Decoder Input ..................................................................18

Configuring the Decoder Work Mode ..........................................................19

Configuring the Decoder Service Mode ................................................................... 20

Configuring the Decoder PIDs Mode....................................................................... 21

Configuring the Decoder Video Parameters .................................................22

Configuring the Decoder Display................................................................24

Configuring the Decoder Output Format ................................................................. 24

Configuring the Decoder VBI Functions................................................................... 26

Configuring the Vcxo Control.....................................................................27

Configuring the AV Sync...........................................................................27

Configuring the Decoder Audio..................................................................28

www.adi-vt.ru

4



TheMX1‐Multi‐ChannelMPEG2SingleDecoder‐OperationManual

7 Hamarpe St., Jerusalem 91450 Israel; Tel: +972-2-5714011 Fax: +972-2-5714033 info@adi-vt.com

Configuring the Output TS...........................................................................31

Configuring the Output TS_OUT_2.............................................................31

Configuring the TS_OUT_2 CAM Parameters............................................................ 31

Configuring the IP OUT ............................................................................32

Configuring the Low Speed Data (RS-232)..............................................................32

Configuring the CA System..........................................................................35

Configuring the Decoder Common Interface................................................35

Configuring the CAM 1 or CAM 2 ........................................................................... 36

Enabling or Disabling MCD.................................................................................... 37

Configuring MCD Slot 1........................................................................................ 37

Configuring the Descramblers Parameters...................................................38

Viewing the MX1 Status ..............................................................................39

Viewing Alarms.......................................................................................39

Viewing Inputs........................................................................................40

Viewing the QPSK1 or QPSK2 Inputs...................................................................... 40

Viewing the ASI 1 or ASI 2 Inputs ......................................................................... 42

Viewing the Unit Configuration ...................................................................44

Viewing and Configuring the Communication Settings................................45

Configuring the Network Settings ..............................................................45

Viewing the Serial Settings .......................................................................46

Configuring Additional Setups.....................................................................47

Configuring the DVB Input Bit Rate............................................................47

Enabling or Disabling High Jitter................................................................48

Configuring the Char Set..........................................................................48

Configuring Decoding Profile.......................................................................49

Configuring the Load Profile......................................................................49

Saving the Load Profile ............................................................................49

Glossary………………………………………………………………………………………………………………..45

www.adi-vt.ru

5



TheMX1‐Multi‐ChannelMPEG2SingleDecoder‐OperationManual

7 Hamarpe St., Jerusalem 91450 Israel; Tel: +972-2-5714011 Fax: +972-2-5714033 info@adi-vt.com

About this Manual

This manual contains instructions on the minimum hardware configuration of the

MX1. Where applicable, the additional options for the maximum configuration are

indicated.

This manual describes the operation of the MX1 through the LCD screen.

Organization of this Manual

Introduction. This chapter describes the hardware interfaces of the MX1 and the

front and rear panels. It also includes a description of and instructions for working

with the menu system.

Configuring the Input TS. This chapter contains instructions for configuring the

input TS parameters included in the Input Menu.

Configuring the Decoder Parameters. This chapter contains instructions for

configuring the decoder parameters included in the Decoder Menu.

Configuring the Output TS. This chapter contains instructions for configuring the

output TS parameters included in the Output Menu.

Configuring the CA System.. This chapter contains instructions for configuring the

Conditional Access system parameters included in the CA System Menu.

Error! Reference source not found. This chapter contains instructions for viewing

the status of the MX1 through the Status Menu.

Viewing the Unit Configuration. This chapter contains instructions for viewing the

current configuration of the MX1 through the Unit Config Menu.

Viewing and Configuration the Communication Settings. This chapter contains

instructions for viewing and configuring the settings of the various communication

ports through the Comm Settings Menu.

Configuring Additional Setups.This chapter contains instructions for configuring

additional parameters such as input bit rate and high jitter.

Configuring the Decoding Profile. This chapter contains instructions loading and

saving configurations.

Glossary. The glossary lists and explains the terms and acronyms used throughout

this manual.

Conventions Used in this Manual

Indicates a note.

www.adi-vt.ru

6



TheMX1‐Multi‐ChannelMPEG2SingleDecoder‐OperationManual

7 Hamarpe St., Jerusalem 91450 Israel; Tel: +972-2-5714011 Fax: +972-2-5714033 info@adi-vt.com

Introduction 1

The MX1 Single MPEG-2 integrated receiver decoder is designed to reduce cost and

satisfy video, audio, and data requirements of digital broadcast television, cable and

satellite operations.

The MX1 integrated receiver decoder is a fully interoperable decoder for digital media

networks that complies fully with the DVB MPEG-2 standard. It decodes program

services provided by up to four selected transport stream inputs.

The decoder supports a large number of applications. Inputs come from the

following sources:

Satellite – QPSK

DVB/ASI

Outputs include the following:

Analog video

Analog audio

Embedded SDI & Non Embedded SDI

AES/EBU

ASI

www.adi-vt.ru

7



TheMX1‐Multi‐ChannelMPEG2SingleDecoder‐OperationManual

7 Hamarpe St., Jerusalem 91450 Israel; Tel: +972-2-5714011 Fax: +972-2-5714033 info@adi-vt.com

Figure 1 illustrates MX1 applications.

Legend:

LSD Low speed data over RS-232

HSD High speed data over RS-422

Other abbreviations See the Glossary on page 51

Figure 1: MX1 Applications

The decoder supports full transport stream (TS) decryption and is compatible with all

conditional access (CA) modules. Depending on the hardware configuration, the

decoder can also provide embedded CA.

Two slots for Conditional Access Modules (CAM) are provided in the front panel to

enable decryption of received signals and transmission of the signals in the clear to

customers. Depending on the hardware configuration, additional slots are provided in

the rear for the insertion of smart cards (SC) used for the embedded decryption

function.

Other applications of the decoder include the following:

Program Identification (PID) filtering and retransmission

Digital Turnaround (DTA) and video monitoring

Control and monitoring through IP.

In remote mode, all decoder functions can be operated remotely from a PC under

MS-WINDOWS through the IP interface.

In addition to an RS232 or RS422 communication port, the MX1 can provide a

General Purpose Interface (GPI) via a 9-pin D-type connector that allows dry contact

alarms. The GPI depends on the hardware configuration.

In local mode, all decoder functions can be operated through a two-line LCD window

and six buttons on the front panel.

www.adi-vt.ru

8



TheMX1‐Multi‐ChannelMPEG2SingleDecoder‐OperationManual

7 Hamarpe St., Jerusalem 91450 Israel; Tel: +972-2-5714011 Fax: +972-2-5714033 info@adi-vt.com

Front and Rear Panels

The front panel provides the means to locally configure the MX1. The rear panel

provides the electrical and communications interfaces.

Front Panel

The front panel contains a two-line LCD window and six control buttons, which are

used to configure the MX1.

Figure 2: MX1Front Panel

The LCD window displays two lines of a selected window. The ▲and ▼buttons are

used to scroll through the window. The ▲, ▼, ►,and ◄buttons are used to select

menu entries viewed through the LCD window. The ENTER button is used to save

new configurations during an edit session, while the ESC button is used to discard

new configurations.

The front panel provides two ports for the Conditional Access Modules (CAM), CAM

1 and CAM 2.

The Status LED provides status information for the MX1, as described in Table 1.

Table 1: Status LED Indications

Appearance Significance

Dark Power off

Blinking Green Power up self test

Green Operational state

Orange Alarm

Red Error

LCDMenuDisplay

Window

Arrowkeys

Esc

4DVB‐CIslots

ENTERTFTmonitoring

display

www.adi-vt.ru

9



TheMX1‐Multi‐ChannelMPEG2SingleDecoder‐OperationManual

7 Hamarpe St., Jerusalem 91450 Israel; Tel: +972-2-5714011 Fax: +972-2-5714033 info@adi-vt.com

Rear Panel

The rear panel contains the power connector, power switch, and communications

connectors for the MX1 minimum hardware configuration.

Figure 3: Rear Panel

XLR Cable Wiring

Figure 4: Rear Panel 9-Pin D-Type to XLR Connector

If you connect a computer to MX1 Serial Port 1 or 2, you must configure the

computer port to the settings listed in Table 2.

Table 2: Serial Line Connection Requirements

Serial Line

Parameter Required Setting for Connected Computer

Baud Rate 115200

Parity None

Data Bits 8

Stop Bits 1

Flow Control Xon/Xoff

www.adi-vt.ru

10



TheMX1‐Multi‐ChannelMPEG2SingleDecoder‐OperationManual

7 Hamarpe St., Jerusalem 91450 Israel; Tel: +972-2-5714011 Fax: +972-2-5714033 info@adi-vt.com

To use the Ethernet port, you must configure the IP address and mask for both your

computer and the MX1. For information on configuring the IP address and mask, refer

to Configuring the Network Settings on page 45.

Features in the Full Feature Hardware Configuration

When the MX1 contains the maximum configuration, four additional BNC connectors

can accommodate more input TSs, which can be four QPSK sources.

The maximum hardware configuration includes the following features:

Two Video – Composite

Two SDIs with embedded audio or SDI without Embedded Audio

Two Audio – Stereo, AES/EBU

Inputs — One QPSK, two ASI, one IP

Outputs — Two ASI, one A/V channels

Computer Communication – 1 RS232, 1 RS422

Powering up the MX1

To power up the MX1, connect the power to the AC main and turn on the power

switch. Figure 5 shows the power connector and switch on the rear panel of the MX1.

Figure 5: Power Connector and Switch

To verify correct performance, observe the changes in the Status LED on the front

panel (Figure 2). Refer to Table 1 for an explanation of the status indications in the

Status LED.

During power up, the Power Up Menu is displayed in the LCD Window for five

seconds. After five seconds, the first two lines of the Main Menu are displayed. For

more information refer to Getting Started on page 12.

www.adi-vt.ru

Inhaltsverzeichnis

Andere ADI Video Technologies Medienkonverter Handbücher

ADI Video Technologies

ADI Video Technologies MX1 Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung