ADJ ENCORE FR50Z Bedienungsanleitung

User Manual

ENCORE FR50Z

instructions herein are subject to change without notice. ADJ Products, LLC logo and identifying

product names and numbers herein are trademarks of ADJ Products, LLC. Copyright protection

claimed includes all forms and matters of copyrightable materials and information now allowed by

statutory or judicial law or hereinafter granted. Product names used in this document may be trade-

marks or registered trademarks of their respective companies and are hereby acknowledged. All

non-ADJ Products, LLC brands and product names are trademarks or registered trademarks of their

respective companies.

ADJ Products, LLC and all aliated companies hereby disclaim any and all liabilities for property,

equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic

loss associated with the use or reliance of any information contained within this document, and/or as

a result of the improper, unsafe, insucient and negligent assembly, installation, rigging, and opera-

tion of this product.

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment. Please turn o all electrical products when

they are not in use. To avoid power consumption in idle mode, disconnect all electrical equipment from power

when not in use. Thank you!

Date Document

Version

Software

Version DMX Channels Notes

10/19/2017 1 1.03 1 / 2 / 3 / 4 Ch. Initial Release

06/26/2018 2 1.04 1 / 2 / 2-2 / 3 / 2-3 / 4

Ch.

Added additional DMX modes,

Stage 2 dimmer curve, and 1.0

gamma correction

09/18/2020 3 1.06 No Change

Updated System Menu, Operating

Instructions, and Primary-Secondary

Confirguration

12/03/2021 4 N/C No Change

Updated Dimensional Drawings,

Specifications, and Operating

Instructions

DOCUMENT VERSION

Due to additional product features and/or enhancements, an updated version of

this document may be available online.

Please check www.adj.com for the latest revision/update of this manual

before beginning installation and/or programming.

TABLE OF CONTENTS

Introduction 4

Features | Warranty Registration | Installation 5

Safety Precautions 6

Layout 7

DMX Setup 8

System Menu 10

Operating Instructions 12

Primary-Secondary Configuration | Zoom Adjustment Knob 16

DMX Traits 17

Multi Unit Power Linking | Dimmer Curve Chart 18

Barn Door Attachment 19

Dimensional Drawing 20

Trouble Shooting | Cleaning 21

Warranty 22

Specifications 23

Unpacking: Thank you for purchasing the Encore FR50z by ADJ Products, LLC. Every Encore FR50z has

been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping

carton for damage that may have occurred during shipping. If the carton appears to have been damaged,

carefully inspect your xture for any damage and be sure all accessories necessary to operate the unit

have arrived intact. In the event that damage has been found or parts are missing, please contact our toll

free customer support number for further instructions. Do not return this unit to your dealer without rst

contacting customer support.

Introduction: The ADJ Encore FR50z is a DMX intelligent, high powered LED fresnel xture. This xture

can be used in a stand alone set up or connected in a Primary/Secondary set up. The Encore FR50z has

two operating modes: dimmer control and DMX control. To optimize the performance of this product,

please read these operating instructions carefully to familiarize yourself with the basic operations of this

unit. These instructions contain important safety information regarding the use and maintenance of this

unit. Please keep this manual with the unit for future reference.

Customer Support: ADJ provides a customer support line, to provide set up help and to answer any ques-

tion that may arise during set up or initial operation.

ADJ PRODUCTS LLC USA

6122 S. Eastern Ave. Los Angeles, CA 90040

323-582-2650 | Fax 323-532-2941 | www.adj.com |[email protected]

ADJ SUPPLY Europe B.V

Junostraat 2 6468 EW Kerkrade, The Netherlands

+31 (0)45 546 85 00 | Fax +31 45 546 85 99 | www.americandj.eu | [email protected]

ADJ PRODUCTS GROUP Mexico

AV Santa Ana 30 Parque Industrial Lerma, Lerma, Mexico 52000

+52 (728) 282-7070 | [email protected]

CUSTOMER SUPPORT

Contact ADJ Service for any product related service and support needs.

Please visit forums.adj.com with questions, comments, or suggestions.

ADJ SERVICE USA - Monday - Friday 8:00am to 4:30pm PST

800-322-6337 | Fax 323-832-2941 | [email protected]

ADJ SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET

+31 45 546 85 60 | Fax +31 45 546 85 96 | [email protected]

REPLACEMENT PARTS please visit parts.adj.com

Warning! To prevent or reduce the risk of electrical shock or re, do not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, as doing so

will void your manufacturer’s warranty. In the unlikely event that your unit requires service, please contact ADJ

Products, LLC.

PLEASE recycle the shipping carton when ever possible.

INTRODUCTION

FEATURES

• Two Operating Modes

• Electronic Dimming 0-100%

• DMX-512 protocol

• 6 DMX Channel Modes

• 3-Pin In/Out DMX Connection

• Power In/Out Connection

• USB Data Update

• Gamma Adjustment

• 5 Dimmer Curves

• Multiple Unit Power Linking

WARRANTY REGISTRATION

The Encore FR50z carries a 2 year limited warranty. Please ll out the enclosed warranty card to

validate your purchase. All returned service items, whether under warranty or not, must be freight

pre-paid and accompanied by a return authorization (R.A.) number. The R.A. number must be clearly

written on the outside of the return package. A brief description of the problem as well as the R.A.

number must also be written down on a piece of paper included in the shipping carton. If the unit is

under warranty, you must provide a copy of your proof of purchase invoice. You may obtain an R.A.

number by contacting our customer support team on our customer support number. All packages

returned to the service department not displaying an R.A. number on the outside of the package will

be returned to the shipper.

INSTALLATION

The unit should be mounted using a mounting clamp (not provided), and axing it to the mounting

bracket that is provided with the unit. Always ensure that the unit is rmly xed to avoid vibration

and slipping during operation. Always ensure that the structure to which you are attaching the unit is

secure and is able to support at least 10 times the unit’s weight. Also, always use a safety cable that

can hold 12 times the weight of the unit when installing the xture. The equipment must be installed

by a professional installer, and it must be installed in a place where it is out of the reach of of unau-

thorized person(s).

SAFETY PRECAUTIONS

• To reduce the risk of electrical shock or re, do not expose this unit to rain or moisture.

• Do not spill water or other liquids into or onto the unit.

• Do not attempt to operate this unit if the power cord has been frayed or broken.

• Do not attempt to remove or break o the ground prong from the electrical cord. This prong is

used to reduce the risk of electrical shock or re in the event of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover for any reason. There are no user serviceable parts inside.

• Never operate this unit with the cover removed.

• Never plug this unit into a dimmer pack.

• Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6 in

(15cm) between this device and a wall.

• Do not attempt to operate this unit if it has been damaged in any way.

• This unit is intended for indoor use only. Use of this product outdoors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to be walked on or pinched by

items placed upon or against them, paying particular attention to the point at which the cords exit

from the unit.

• Cleaning - The xture should be cleaned only as recommended by the manufacturer. See the

Cleaning section of this manual for details.

• Heat - The appliance should be situated away from heat sources such as radiators, heat registers,

stoves, or other appliances (including ampliers) that produce heat.

• The xture should be serviced by qualied service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen onto, or liquid has been spilled into, the xture.

C. The xture has been exposed to rain or water.

D. The xture does not appear to operate normally or exhibits a marked change in performance.

E. The xture has fallen and/or has been subjected to extreme handling.

LAYOUT

1. Zoom Adjustment Knob

2. Power In

3. 3-Pin DMX In

4. 3-Pin DMX Out

5. Power Out

6. Mode Button

7. USB Port

8. Enter Button

9. LCD Menu Control Display

10.Down Button

11.Up Button

12.Barn Door Secure Lock

13.Gel Frame

DMX SETUP

Ppower Supply: The ADJ Encore FR50z contains an automatic voltage switch, which will automati-

cally sense the voltage when it is plugged into the power source. With this switch, there is no need

to worry about the correct power voltage, and this unit can be plugged in anywhere.

DMX-512: DMX is short for Digital Multiplex. This is a universal protocol used by most lighting and

controller manufacturers as a form of communication between intelligent fixtures and controllers.

A DMX controller sends DMX data instructions from the controller to the fixture. DMX data is sent

as serial data that travels from fixture to fixture via the DATA “IN” and DATA “OUT” XLR terminals

located on all DMX fixtures (most controllers only have a DATA “OUT” terminal).

DMX Linking: DMX is a language allowing all makes and models of different manufacturers to be

linked together and operate from a single controller, as long as all fixtures and the controller are DMX

compliant. To ensure proper DMX data transmission, try to use the shortest cable path possible

when linking several DMX fixtures. The order in which fixtures are connected in a DMX line does not

influence the DMX addressing. For example, a fixture assigned a DMX address of 1 may be placed

anywhere in a DMX line: at the beginning, at the end, or anywhere in the middle. Therefore, the first

fixture controlled by the controller could be the last fixture in the chain. When a fixture is assigned

a DMX address of 1, the DMX controller knows to send DATA assigned to address 1 to that unit, no

matter where it is located in the DMX chain.

Data Cable (DMX Cable) Requirements (For DMX Operation): The Encore FR50z can be con-

trolled via DMX-512 protocol, and has 6 different DMX channel modes. The DMX address is set elec-

tronically using the controls on the rear panel of the unit. Your unit and your DMX controller require

an approved DMX-512 110 Ohm Data cable for data input and data output (Figure 1). We recom-

mend AccuCable DMX cables. If you are making your own cables, be sure to use standard 110-120

Ohm shielded cable (This cable be purchased at almost all professional sound and lighting stores).

Your cables should be made with a male XLR connector at one end and a female XLR connector at

the other. Also remember that DMX cable must be daisy chained and cannot be split.

DMX SETUP

Notice: Be sure to follow figures two and three when making your own cables. Do not use the

ground lug on the XLR connector. Do not connect the cable’s shield conductor to the ground lug or

allow the shield conductor to come into contact with the XLR’s outer casing. Grounding the shield

could cause a short circuit and result in erratic behavior.

Special Note: Line Termination. When longer runs of cable are used, you may need to use a ter-

minator on the last unit to avoid erratic behavior. A terminator is a 110-120 ohm 1/4 watt resistor,

which is connected between pins 2 and 3 of a male XLR connector (DATA + and DATA -). This unit is

inserted in the female XLR connector of the last unit in your daisy chain to terminate the line. Using a

cable terminator (ADJ part number Z-DMX/T) will reduce the risk of erratic behavior.

5-Pin XLR DMX Connectors. Some manufacturers use 5-pin DMX-512 data cables for DATA trans-

mission in place of 3-pin. 5-pin DMX fixtures may be implemented in a 3-pin DMX line by using a

cable adaptor. These adaptors are readily available at most electric stores. The chart below details a

proper cable conversion.

SYSTEM MENU

MENU SUBMENU OPTIONS DESCRIPTION

Opening Display

Update Wait...

WELCOME

FR50Z

Vx.xx

Start up display

Interface Display ADDR: xxx

CH:xx Main display

Set ADDR

xxx 001 - 509 DMX addressing

User Mode

1CH

DMX channel

mode selection

2CH

2-2CH

3CH

2-3CH

4CH

Function

NO DMX Lost DMX Black / Hold DMX lost status

LCD Set

Display On / O

Display settingsKey Lock On / O / On1

Flash On / O

Temp Celsius / Fahren Temperature set-

ting

Dim Curve

Standard

Dimming curve

modes

Stage

Architec

Theatre

Stage2

Disp Set

ADDR

Main display set-

ting

Disp. Ch

Secondry

Gamma

1.0

Gamma bright-

ness

2.0

2.2

2.4

2.8

CONTINUED ON NEXT PAGE

Andere Handbücher für ENCORE FR50Z

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ADJ DJ-Equipment Handbücher

ADJ

ADJ BubbleTron Xl Bedienungsanleitung

ADJ

ADJ 5PX HEX PEARL Bedienungsanleitung

ADJ

ADJ Eliminator Lighting FROST FX BAR W Bedienungsanleitung

ADJ

ADJ Vizi BSW 300 Bedienungsanleitung

ADJ

ADJ ELEMENT HEXIP Bedienungsanleitung

ADJ

ADJ StarTec Series Bedienungsanleitung

ADJ

ADJ 3D Vision Bedienungsanleitung

ADJ

ADJ MDF2-9SYS Bedienungsanleitung

ADJ

ADJ NINJA 5RX Bedienungsanleitung

ADJ

ADJ Vizi Beam Hybrid 2R Bedienungsanleitung

ADJ

ADJ Fusion Tri FX Bar Bedienungsanleitung

ADJ

ADJ ENCORE BURST 100 IP Bedienungsanleitung

ADJ

ADJ MEGA HEX PAR Bedienungsanleitung

ADJ

ADJ Encore Profile 1000 WW Bedienungsanleitung

ADJ

ADJ M-101HD Bedienungsanleitung

ADJ

ADJ Dotz Par Bedienungsanleitung

ADJ

ADJ ENCORE BURST 200 Bedienungsanleitung

ADJ

ADJ ENTOUR HAZE PRO Bedienungsanleitung

ADJ

ADJ Bubbletron Go Bedienungsanleitung

ADJ

ADJ VIZI BEAM 12RX Bedienungsanleitung

ADJ

ADJ Dotz Par Bedienungsanleitung

ADJ

ADJ 32 HEX PANEL IP Bedienungsanleitung

ADJ

ADJ WiFly Chameleon Bedienungsanleitung

ADJ

ADJ BOOM BOX FX3 Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung