ADJ PAR Z100 5K Bedienungsanleitung

User Instructions

A.D.J. Supply Europe B.V.

Junostraat 2

6468 EW Kerkrade

The Netherlands

www.adj.eu

A.D.J. Supply Europe B.V. –www.adj.eu –Par Z100 5K Instruction Manual Page 2

herein are subject to change without notice. ADJ Products, LLC logo and identifying product names and

numbers herein are trademarks of ADJ Products, LLC. Copyright protection claimed includes all forms and

matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter

granted. Product names used in this document may be trademarks or registered trademarks of their respective

companies and are hereby acknowledged. All non-ADJ Products, LLC brands and product names are

trademarks or registered trademarks of their respective companies.

ADJ Products, LLC and all affiliated companies hereby disclaim any and all liabilities for property, equipment,

building, and electrical damages, injuries to any persons, and direct or indirect economic loss associated with

the use or reliance of any information contained within this document, and/or as a result of the improper,

unsafe, unsufficient and negligent assembly, installation, rigging, and operation of this product.

DOCUMENT VERSION

Please check www.adj.com for the latest revision/update of this guide.

Date

Document

Version

Software

Version ≥

DMX Channel

Mode

Notes

09/27/17

1.0

1/2/3

Initial Release

01/02/18

1.2

1/2/3/4

Added: RDM Protocol Support, 4 CH

DMX Mode, Stage 2 Dimmer Curve,

& Default Settings System Menu

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the environment. Please turn off all electrical products when they are not

in use. To avoid power consumption in idle mode, disconnect all electrical equipment from power when not in use. Thank

you!

A.D.J. Supply Europe B.V. –www.adj.eu –Par Z100 5K Instruction Manual Page 3

Contents

GENERAL INFORMATION ........................................................................................................................................................4

GENERAL INSTRUCTIONS ........................................................................................................................................................4

FEATURES................................................................................................................................................................................4

HANDLING PRECAUTIONS.......................................................................................................................................................4

SAFETY PRECAUTIONS ............................................................................................................................................................5

DMX SET UP ............................................................................................................................................................................6

SYSTEM MENU........................................................................................................................................................................8

DMX OPERATION ..................................................................................................................................................................11

BEAM ANGLE ADJUSTMENT .................................................................................................................................................11

1 CHANNEL MODE ................................................................................................................................................................12

2 CHANNEL MODE ................................................................................................................................................................12

3 CHANNEL MODE ................................................................................................................................................................12

4 CHANNEL MODE ................................................................................................................................................................12

DIMMER CURVE CHART........................................................................................................................................................13

DIMENSIONAL DRAWINGS....................................................................................................................................................13

INSTALLATION.......................................................................................................................................................................14

MULTIPLE UNIT POWER LINKING .........................................................................................................................................14

FUSE REPLACEMENT .............................................................................................................................................................14

CLEANING..............................................................................................................................................................................14

TROUBLE SHOOTING.............................................................................................................................................................14

SPECIFICATIONS ....................................................................................................................................................................15

ROHS - A great Contribution to the Conservation of Environment.....................................................................................16

WEEE –Waste of Electrical and Electronic Equipment ........................................................................................................17

NOTES ...................................................................................................................................................................................18

NOTES ...............................................................................................................................Fehler! Textmarke nicht definiert.

A.D.J. Supply Europe B.V. –www.adj.eu –Par Z100 5K Instruction Manual Page 4

INOZIONE

GENERAL INFORMATION

Unpacking: Thank you for purchasing the Par Z100 5K by ADJ Products, LLC. Every Par Z100 5K has been

thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for

damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your

fixture for any damage and be sure all equipment necessary to operate the unit has arrived intact. In the event

damage has been found or parts are missing, please contact our toll free customer support number for further

instructions. Please do not return this unit to your dealer without contacting customer support first.

Introduction: The Par Z100 5K is a DMX intelligent, zooming, LED par fixture. The Par Z100 5K also operates

as a stand alone fixture. This fixture is suitable for theaters, studios, retail stores, and other similar locations.

For best results use fog or special effects smoke to enhance the beams projections.

Customer Support: If you encounter any problems, please contact your trusted American Audio shop. We

also offer the possibility, to contact us directly: You can contact us via our website www.adj.eu or via email:

[email protected]

Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.

Warning! This may cause severe eye damage. Avoid looking directly into the light source at all times!

GENERAL INSTRUCTIONS

To optimize the performance of this product, please read these operating instructions carefully to familiarize

yourself with the basic operations of this unit. These instructions contain important safety information regarding

the use and maintenance of this unit. Please keep this manual with the unit, for future reference.

FEATURES

•DMX-512 Protocol Compatible (4 DMX Channel Modes: 1 Channel, 2 Channels, 3 Channels, & 4 Channels)

•5-Pin XLR In/Out Connections

•powerCON In/Out Connections

•6 Dimmer Curve Modes

•Digital Display for Address and Function Setting

•Gamma Correction Adjustment

•Dimming Frequency Adjustment

•Multiple Unit Power Linking (See page 14)

HANDLING PRECAUTIONS

Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, doing so will

void your manufactures warranty. In the unlikely event your unit may require service please contact ADJ

Products, LLC.

During operation the housing may become extremely hot. Avoid touching the unit with bare hands while in use.

ADJ Products, LLC will not accept any liability for any resulting damages caused by the non-observance of this

manual or any unauthorized modification to this unit.

A.D.J. Supply Europe B.V. –www.adj.eu –Par Z100 5K Instruction Manual Page 5

SAFETY PRECAUTIONS

For Your Own Personal Safety, Please Read and Understand This Manual Completely Before You

Attempt To Install Or Operate This Unit!

• To reduce the risk of electrical shock or fire, do not expose this unit rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Be sure that the local power outlet match that of the required voltage for your unit.

• Do not attempt to operate this unit if the power cord has been frayed or broken.

• Do not attempt to remove or break off the ground prong from the electrical cord. This prong is used to reduce

the risk of electrical shock and fire in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm) between

this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product outdoors voids all warranties.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed

upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point

where they exit from the appliance.

•Cleaning -The fixture should be cleaned only as recommended by the manufacturer. See page 14 for

cleaning details.

• Heat -This fixture should be situated away from heat sources such as radiators, heat registers, stoves, or

other appliances (including amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. Objects have fallen, or liquid has been spilled into the appliance.

B. The appliance has been exposed to rain or water.

C. The appliance does not appear to operate normally or exhibits a marked change in performance.

A.D.J. Supply Europe B.V. –www.adj.eu –Par Z100 5K Instruction Manual Page 6

DMX SET UP

Power Supply: The ADJ Par Z100 5K contains an automatic voltage switch, which will auto sense the voltage

when it is plugged into the power source. With this switch there is no need to worry about the correct power

voltage, this unit can be plugged in anywhere.

DMX-512: DMX is short for Digital Multiplex. This is a universal protocol used by most lighting and controller

manufactures as a form of communication between intelligent fixtures and controllers. A DMX controller sends

DMX data instructions from the controller to the fixture. DMX data is sent as serial data that travels from fixture

to fixture via the DATA “IN” and DATA “OUT” XLR terminals located on all DMX fixtures (most controllers only

have a DATA “OUT” terminal).

DMX Linking: DMX is a language allowing all makes and models of different manufactures to be linked

together and operate from a single controller, as long as all fixtures and the controller are DMX compliant. To

ensure proper DMX data transmission, when using several DMX fixtures try to use the shortest cable path

possible. The order in which fixtures are connected in a DMX line does not influence the DMX addressing. For

example; a fixture assigned a DMX address of 1 may be placed anywhere in a DMX line, at the beginning, at

the end, or anywhere in the middle. Therefore, the first fixture controlled by the controller could be the last

fixture in the chain. When a fixture is assigned a DMX address of 1, the DMX controller knows to send DATA

assigned to address 1 to that unit, no matter where it is located in the DMX chain.

Data Cable (DMX Cable) Requirements (For DMX and Master/Slave Operation): The Par Z100 5K can be

controlled via DMX-512 protocol. The Par Z100 5K has four DMX channel modes; 1 channel mode, 2 channel

mode, 3 channel mode, & 4 channel mode. The DMX address is set electronically using

the controls on the rear panel of the unit. Your unit and your DMX controller require an

approved DMX-512 110 Ohm Data cable for data input and data output (Figure 1). We

recommend Accu-Cable DMX cables. If you are making your own cables, be sure to use

standard 110-120 Ohm shielded cable (This cable may be purchased at almost all

professional sound and lighting stores). Your cables should be made with a male and

female XLR connector on either end of the cable. Also remember that DMX cable must be

daisy chained and cannot be split.

Notice: Be sure to follow figures two and three when making your own cables. Do not use the ground lug on

the XLR connector. Do not connect the cable’s shield conductor to the ground lug or allow the shield conductor

to come in contact with the XLR’s outer casing. Grounding the shield could cause a short circuit and erratic

behavior.

Figure 2

XLR Pin Configuration

Pin1 = Ground

Pin2 = Data Compliment (negative)

Pin3 = Data True (positive)

Figure 3

Figure 1

A.D.J. Supply Europe B.V. –www.adj.eu –Par Z100 5K Instruction Manual Page 7

DMX SET UP (continued)

Special Note: Line Termination. When longer runs of cable are used, you may need to use a terminator on

the last unit to avoid erratic behavior. A terminator is a 110-120 ohm 1/4 watt resistor which is connected

between pins 2 and 3 of a male XLR connector (DATA + and DATA -). This unit is inserted in the female XLR

connector of the last unit in your daisy chain to terminate the line. Using a cable terminator (ADJ part number

Z-DMX/T) will decrease the possibilities of erratic behavior.

Termination reduces signal errors and avoids

signal transmission problems and interference.

It is always advisable to connect a DMX

terminal, (Resistance120 Ohm 1/4 W) between

PIN 2 (DMX-) and PIN 3 (DMX +) of the last

fixture.

Figure 4

5-Pin XLR DMX Connectors. This unit use 5-pin DMX-512 data cables for DATA transmission. 5-pin DMX

fixtures may be implemented in a 3-pin DMX line. When inserting standard 5-pin data cables in to a 3-pin line

a cable adaptor must be used, these adaptors are readily available at most electric stores. The chart below

details a proper cable conversion.

3-Pin XLR to 5-Pin XLR Conversion

Conductor

3-pin XLR Female (Out)

5-pin XLR Male (In)

Ground/Shield

Pin 1

Data compliment (- signal)

Pin 2

Data True (+ signal)

Pin 3

Not used

Pin 4 - Do Not Use

Not used

Pin 5 - Do Not Use

A.D.J. Supply Europe B.V. –www.adj.eu –Par Z100 5K Instruction Manual Page 8

SYSTEM MENU

DMX 512

Address

Channel Mode

DMX State

Dimmer Mode

Dimming frequency

Gamma correction

Display inversion

Manual mode

Test

Temperature

Fixture Hours

Software Version

Restore factory settings

A.D.J. Supply Europe B.V. –www.adj.eu –Par Z100 5K Instruction Manual Page 9

SYSTEM MENU (continued)

System Menu: When making adjustments press ENTER to confirm your setup then press and hold the

MENU button for at least 3 seconds. To exit without making any adjustments press the MENU button.

The display will lock after 30 seconds, press the MENU button for 3 seconds to unlock.

- DMX Address Setting.

1. Press the either the MENU, UP, or DOWN buttons until is displayed, press ENTER.

2. The current address will now be displayed and flashing. Press the UP or DOWN buttons to find your desired

address. Press ENTER to set your desired DMX address.

- This will let select your desired DMX channel mode.

1.Press the either the MENU button until is displayed, press ENTER. The current DMX channel

mode will be displayed.

2.Press the UP or DOWN buttons to find your desired DMX channel mode and press ENTER to confirm and

exit.

- This mode can be used as a precaution mode, that in case the DMX signal is lost,

interrupted, or power is lost, the operating mode chosen in the setup is the running mode the fixture

will go into when the DMX signal is lost. You can also set this as the operating mode you would like

the unit to return to when power is applied.

1. Press the MENU button until is displayed, and either “BLND” or “HOLD” will be displayed

beneath.

2. Press ENTER and the bottom choice will begin to flash. Use the UP or DOWN buttons to choose an

operating mode you would like the unit to start up in when power is applied or the DMX signal is lost.

•BLND (Blackout) - If the DMX signal is lost or interrupted, the unit will automatically go into stand by mode.

•HOLD - If the DMX signal is lost the fixture will stay in the last DMX setting. If power is applied and this mode

is set, the unit will automatically go into the last DMX set up.

3. Press ENTER to confirm your desired set up.

- This will let select your desired dimmer curve.

1. Press the MENU button until is displayed, and press ENTER. 1 of 6 dimmer curves will be

displayed. “STDA” (standard), “STGE” (stage), “TV” (TV), “ARAL” (Architectural), “THAL” (Theatre), or (Stage

2). See the dimmer curve chart on page 13 for more info.

2. Press the UP or DOWN buttons to find your desired dimmer curve and press ENTER to confirm and exit.

- With this function you can adjust the dimming frequency.

1. Press the MENU button until is displayed, press ENTER.

2. Use the UP or DOWN buttons to adjust the dimming frequency between 900hz, 1000hz, 1100hz, 1200hz,

1300hz,1400hz, 1500hz, 2500hz, 4000hz, 5000hz, 10000hz, 15000hz,20000hz, or 250000hz.

3. Once you have found your desired dimming frequency press ENTER to confirm.

A.D.J. Supply Europe B.V. –www.adj.eu –Par Z100 5K Instruction Manual Page 10

SYSTEM MENU (continued)

- In this menu you are able to make gamma corrections.

1. Press the MENU button until is displayed, press ENTER.

2. Use the UP or DOWN buttons to gamma corrections.

3. Once you have found your desired dimming frequency press ENTER to confirm.

- This function will reverse the display 180º.

1. Press the either the MENU button until is displayed, press ENTER.

2. Press the UP button to select “DSIP” to “flip” the display, or “DISP” to revert the display to normal.

3. Press ENTER to confirm.

- This function will allow you to manually adjust each brightness, fine dimming, and

strobing. Fine dimming and strobing are only used with 3 channel mode.

1. Press the MENU button until is displayed, press ENTER.

2. Use the UP and DOWN buttons to scroll through the settings. Once you have found your desired function

you would like to adjust press ENTER.

3. After you have pressed ENTER, use the UP and DOWN buttons to adjust the values. Once you have made

your adjustments press ENTER to set them. Press the MENU button to exit.

- This function will run a self test program.

1. Press the MENU button until is displayed, press ENTER.

2. The fixture will now run a self test. Press the MENU button to exit and quit the self test.

- With this function you can check the temperature of the fixture.

1. Press the MENU button until is displayed, press ENTER.

2. The fixture temperature will now be displayed. Press MENU to exit.

- With this function you can display the running time of the unit.

1. Press the MENU button until is displayed, press ENTER.

2. The running time of the fixture will now be displayed. Press MENU to exit.

- Use this function to display the Software version of the unit.

1. Press the either the MENU button until is displayed, press ENTER.

2. The display will show the software version.

Inhaltsverzeichnis

Andere ADJ DJ-Equipment Handbücher

ADJ

ADJ 7P HEX IP Bedienungsanleitung

ADJ

ADJ STARSHIP Bedienungsanleitung

ADJ

ADJ HYD320 Bedienungsanleitung

ADJ

ADJ Encore Profile 1000 Color Bedienungsanleitung

ADJ

ADJ 6-PACK SKB CASE Bedienungsanleitung

ADJ

ADJ VF FLURRY Bedienungsanleitung

ADJ

ADJ PAR Z120 RGBW Bedienungsanleitung

ADJ

ADJ 1226100374 Bedienungsanleitung

ADJ

ADJ MDF2-9SYS Bedienungsanleitung

ADJ

ADJ ENCORE PROFILE MINI COLOR Bedienungsanleitung

ADJ

ADJ PINSPOT LED QUAD DMX Bedienungsanleitung

ADJ

ADJ COB CannOn Wash DW Bedienungsanleitung

ADJ

ADJ SABER BAR 6 Bedienungsanleitung

ADJ

ADJ BOOM BOX FX3 Bedienungsanleitung

ADJ

ADJ Dotz Par Bedienungsanleitung

ADJ

ADJ WiFly QA5 IP Bedienungsanleitung

ADJ

ADJ StarTec Series Bedienungsanleitung

ADJ

ADJ XPress LED Bedienungsanleitung

ADJ

ADJ ELEMENT Series Bedienungsanleitung

ADJ

ADJ ENCORE PROFILE PRO WW Bedienungsanleitung

ADJ

ADJ DOTZ PAR 100 Bedienungsanleitung

ADJ

ADJ PinPoint Gobo COLOR Bedienungsanleitung

ADJ

ADJ HYDRO WASH X7 Bedienungsanleitung

ADJ

ADJ MOD QA60 Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung