ADJ PAR Z120 RGBW Bedienungsanleitung

User Instructions

Z120 RGBW

ZP120 RGBW

PAR Z120 RGBW

PAR ZP120 RGBW

ADJ Products, LLC !ww.adj.com !PAR Z120/ZP120 RGBW User Instructions Page 2

Introduction ........................................................................................5

General Instructions, Features and Warranty Registration ........................................... 5

Handling and Safety Precautions ......................................................................... 6

Overview ............................................................................................................... 7

DMX Set Up .......................................................................................................... 8

Menu and Functions ........................................................................................... 11

DMX Operation ................................................................................................... 15

Beam Adjustment ............................................................................................... 15

Controlling the Unit ............................................................................................ 16

Installation .......................................................................................................... 20

Cleaning and Troubleshooting ........................................................................... 21

Specifications ..................................................................................................... 22

Warranty ............................................................................................................. 23

PAR Z120/ZP120 RGBW

Table of Contents

ADJ Products, LLC !ww.adj.com !PAR Z120/ZP120 RGBW User Instructions Page 3

Information,

specifications,

diagrams, images, and instructions herein are subject to change without notice.

ADJ Products, LLC logo and identifying product names and numbers herein are

trademarks of ADJ Products, LLC. Copyright protection claimed includes all forms

and matters of copyrightable materials and information now allowed by statutory or

judicial law or hereinafter granted. Product names used in this document may be

trademarks or registered trademarks of their respective companies and are hereby

acknowledged. All non-ADJ Products, LLC brands and product names are

trademarks or registered trademarks of their respective

companies.

ADJ Products, LLC and all affiliated companies hereby disclaim any and all

liabilities for property, equipment, building, and electrical damages, injuries to

any persons, and direct or indirect economic loss associated with the use or

reliance of any information contained within this document, and/or as a result of

the improper, unsafe, insufficient and negligent assembly, installation, rigging,

and operation of this product.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

FCC RADIO FREQUENCY INTERFERENCE WARNINGS & INSTRUCTIONS

This product has been tested and found to comply with the limits as per Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This device uses and can radiate

radio frequency energy and, if not installed and used in accordance with the

included instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this device does cause harmful interference to radio or television

reception, which can be determined by turning the device off and on, the user is

encouraged to try to correct the interference by one or more of the following

methods:

•Reorient or relocate the device.

•Increase the separation between the device and the receiver.

•Connect the device to an electrical outlet on a circuit different from which the

radio receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.!

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the environment. Please turn

off all electrical products when they are not in use. To avoid power

consumption in idle mode, disconnect all electrical equipment from power

when not in use. Thank you!!

! !

ADJ Products, LLC !ww.adj.com !PAR Z120/ZP120 RGBW User Instructions Page 4

Introduction: The PAR Z120/ZP120 RGBW is a modern LED twist to the traditional

halogen Par Can. The PAR Z120/ZP120 RGBW powered by a potent 115W quad

C.O.B. LED (Chip On Board) with red, green, blue & white colors. Its output is

comparable to a 1,000W halogen sealed beam Par. It is equipped with 5 different beam

angle options (that may be changed by hand) while powerCON In/Out allows for the

fixture to be daisy chained. 5-pin DMX control offers a variable strobe rate and 5

different dimming curve options.

The PAR Z120/ZP120 RGBW allows lighting and stage designers the look of the

traditional stage par with the technological conveniences of modern day lighting. The

advantages include low power draw (fixture and performers won’t get hot on stage),

DMX control of dimming and strobe (no dimmer controllers need, and optional

additional accessories for customization. This fixture is suitable for theaters, studios,

retail stores, and other similar locations. For best results use fog or special effects

smoke to enhance the beams

ojections.

Unpacking: Thank you for purchasing the PAR Z120/ZP120 RGBW by ADJ Products,

LLC. Every PAR Z120/ZP120 RGBW has been thoroughly tested and has been shipped

in perfect operating condition. Carefully check the shipping carton for damage that may

have occurred during shipping. If the carton appears to be damaged, carefully inspect

your fixture for any damage and be sure all equipment necessary to operate the unit

has arrived intact. In the event damage has been found or parts are missing, please

contact our toll free customer support number for further instructions. Please do not

return this unit to your dealer without contacting customer support first.

Customer Support: ADJ Products, LLC provides a toll free customer support line,

to provide help and to answer any question should you encounter problems during your

set up or initial operation. You may also visit us on the web at www.adj.com for any

comments or suggestions. Service Hours are Monday through Friday 8:00 a.m. to

4:30 p.m. Pacific Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: support@americandj.com

Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this

unit to rain or moisture.

Warning! This may cause severe eye damage. Avoid looking

into the light

source at all times!

DOCUMENT VERSION

Please check www.adj.com for the latest revision/update of this guide.

! !

Date

Document

Version

Software

Version

DMX Channel

Mode

Notes

8/1/18

1.0

1/2/3

Initial Release

ADJ Products, LLC !ww.adj.com !PAR Z120/ZP120 RGBW User Instructions Page 5

To optimize the performance of this product, please read these operating instructions

carefully to become familiarized with the basic operations of this unit. These

instructions contain important safety information regarding the use and maintenance of

this unit. Please keep this manual with the unit, for future reference.

•Beam angle: 7°/11.5°/16°/20.5°/25° (manual adjustment)

•6 DMX Channels (4/5/6/7/8/9 Ch. modes)

•4-button DMX menu display on rear panel

•Adjustable latch to manually change beam angle

•Includes gel frame for diffusion filters (Diffusion filter sold separately)

•Strobe effect

•Flicker Free Operation

•Electronic Dimming: 0 - 100% with 5 dimming curves

•Run all night – No duty cycle

The PAR Z120/ZP120 RGBW carries a 2 year (730 days) limited warranty. Please fill

out the enclosed warranty card to validate your purchase and warranty. You may also

whether under warranty or not, must be freight pre-paid and accompany a return

authorization (R.A.) number. If the unit is under warranty you must provide a copy

of your proof of purchase invoice. Please contact ADJ Products, LLC customer

support for a R.A. number.

Caution! There are no user serviceable parts inside this unit. Do not attempt any

repairs yourself; doing so will void your manufactures warranty. In the unlikely event

your unit may require service please contact ADJ Products, LLC.

During operation the housing may become extremely hot. A

touching the unit

with bare hands while in use.

ADJ Products, LLC will not accept any liability for any resulting

ages caused by

the non-observance of this manual or any un

rized modification to this unit.

PAR Z120/ZP120 RGBW

Warranty Registration

PAR Z120/ZP120 RGBW

Handling Precautions

PAR Z120/ZP120 RGBW

General Instructions

PAR Z120/ZP120 RGBW

Features

ADJ Products, LLC !ww.adj.com !PAR Z120/ZP120 RGBW User Instructions Page 6

For Your Own Personal Safety, Please Read and Understand

This

Manual

Completely Before You Attempt To Install Or

Operate This Unit!

•To reduce the risk of electrical shock or fire, do not expose this unit rain or moisture.

•Do not spill water or other liquids into or on to your unit.

•Be sure that the local power outlet matches that of the required voltage for your unit.

•Do not attempt to operate this unit if the power cord has been frayed or broken.

•Do not attempt to remove or break off the ground prong from the electrical cord.

This prong is used to reduce the risk of electrical shock and fire in case of an

internal short.

•Disconnect from main power before making any type of connection.

•Do not remove the cover under any conditions. There are no user serviceable parts

inside.

•Never operate this unit when its cover is removed.

•Always be sure to mount this unit in an area that will allow proper ventilation. Allow

about 6” (15cm) between this device and a wall.

•Do not attempt to operate this unit if it becomes damaged.

•This unit is intended for indoor use only; use of this product outdoors voids all

warranties.

•Always mount this unit in safe and stable matter.

•Power-supply cords should be routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying particular attention to cords

at plugs, convenience receptacles and the point where they exit from the appliance.

•The fixture should be cleaned only as recommended by the manufacturer. See

page 21 for cleaning details.

•This fixture should be situated away from heat sources such as radiators, heat

registers, stoves, or other appliances (including amplifiers) that produce heat.

•The fixture should be serviced by qualified service personnel when:

A. Objects have fallen, or liquid has been spilled into the appliance.

B. The appliance has been exposed to rain or water.

C. The appliance does not appear to operate normally or exhibits a marked change

in performance.

PAR Z120/ZP120 RGBW

Safety Precautions

ADJ Products, LLC !ww.adj.com !PAR Z120/ZP120 RGBW User Instructions Page 7

1 - Display: Show the various menus and the selected functions；

2 - LED indicator：

POWER

Power On

DMX

DMX input present

3 - Button

To select the programming functions

DOWN

To go forward in the selected functions

To go backward in the selected functions

ENTER

To confirm the selected functions

4 – Fuse: F 3.15A.

5 – Mains Input/Output：Use powerCON true one mains connection.

6 – DMX Input/Output

PAR Z120/ZP120 RGBW

Overview

ADJ Products, LLC !ww.adj.com !PAR Z120/ZP120 RGBW User Instructions Page 8

Power Supply: The PAR Z120/ZP120 RGBW contains an automatic voltage

switch, which will auto sense the voltage when it is plugged into the power

source. With this switch there is no need to worry about the correct power

voltage, this unit can be plugged in anywhere.

DMX-512: DMX is short for Digital Multiplex. This is a universal

pro

tocol used

by most lighting and controller manufactures as a form

communication

between intelligent fixtures and controllers. A DMX controller sends DMX

data instructions from the controller to the fixture. DMX data is sent as serial

data that travels from fixture to fixture via the DATA “IN” and DATA “OUT” XLR

terminals located on all DMX fixtures (most controllers only have a DATA “OUT”

terminal).

DMX Linking: DMX is a language allowing all makes and models of

different manufactures to be linked together and operate from a single

controller, as long as all fixtures and the controller are DMX compliant. To

ensure proper DMX data transmission, when using several DMX fixtures try

to use the shortest cable path possible. The order in which fixtures are

connected in a DMX line does not influence the DMX addressing. For example,

a fixture assigned a DMX address of 1 may be placed anywhere in a DMX line,

at the beginning, at

the

end, or anywhere in the middle. Therefore, the first

fixture

contr

olled

by the controller could be the last fixture in the chain. When

a fixture is assigned a DMX address of 1, the DMX controller knows to send

DATA assigned to address 1 to that unit, no matter where it is

located

in the

DMX chain.

Data Cable (DMX Cable) Requirements (For DMX and Master/Slave

Operation): The PAR Z120/ZP120 RGBW can be controlled via DMX-512

protocol. The PAR Z120/ZP120 RGBW three DMX channel modes; 1 channel

mode, 2 channel mode, & 3 channel mode. The DMX address is set

electronically using the controls on the rear panel of the unit. Your unit and

your DMX controller require an approved DMX-512

110 Ohm Data cable for data input and data output

(Figure 1). We recommend Accu-Cable DMX

cables. If you are making your own cables, be sure

to use standard 110-120 Ohm shielded cable (This

cable be purchased at almost all professional

sound and lighting stores). Your cables should be

made with a male and female XLR connector on

either end of the cable. Also remember that DMX

cable must be daisy chained and cannot be split.!

PAR Z120/ZP120 RGBW

DMX Set Up

Figure 1

ADJ Products, LLC !ww.adj.com !PAR Z120/ZP120 RGBW User Instructions Page 9

Notice: Be sure to follow figures two and three when making your own cables.

Do not use the ground lug on the XLR connector. Do not connect the cable’s

shield conductor to the ground lug or allow the shield conductor to come in

contact with the XLR’s outer casing. Grounding the shield could cause a short

circuit and erratic behavior.

Special Note: Line

Termination.

When longer runs of cable are used, you

may need to use a terminator on the last unit to avoid erratic behavior. A

terminator is a 110-120 ohm 1/4 watt resistor, which is connected between pins

2 and 3 of a male XLR connector (DATA + and DATA -). This unit is inserted in

the female XLR connector of the last unit in your daisy chain to terminate the

line. Using a cable terminator (ADJ part number Z-DMX/T) will decrease the

possibilities of erratic behavior.

Figure 4

DMX512 IN

3-PIN XLR

PAR Z120/ZP120 RGBW

DMX Set Up

ADJ Products, LLC !ww.adj.com !PAR Z120/ZP120 RGBW User Instructions Page 10

5-Pin XLR DMX

Connectors.

This unit use 5-pin DMX-512 data cables for

DATA transmission. 5-pin DMX fixtures may be implemented in a 3-pin DMX

line. When inserting standard 5-pin data cables in to a 3-pin line a cable

adaptor must be used, these adaptors are readily available at most electric

stores. The chart below details a proper cable conversion.

3-PIN XLR TO 5-PIN XLR CONVERSION

Conductor

3-Pin XLR Female (Out)

5-Pin XLR Male (In)

Ground/Shield

Pin 1

Data Compliant (-signal)

Pin 2

Data True (+signal)

Pin 3

Not Used

Pin 4 – Do Not Use

Not Used

Pin 5 – Do Not Use

PAR Z120/ZP120 RGBW

DMX Set Up

Andere Handbücher für PAR Z120 RGBW

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ADJ DJ-Equipment Handbücher

ADJ

ADJ StarTec Series Bedienungsanleitung

ADJ

ADJ ENCORE LP7P Bedienungsanleitung

ADJ

ADJ XPress LED Bedienungsanleitung

ADJ

ADJ HYD320 Bedienungsanleitung

ADJ

ADJ Vision Series Bedienungsanleitung

ADJ

ADJ ADJ-610 Bedienungsanleitung

ADJ

ADJ American DJ FUSION FX BAR 1 Bedienungsanleitung

ADJ

ADJ HYDRO WASH X7 Bedienungsanleitung

ADJ

ADJ Fusion Tri FX Bar Bedienungsanleitung

ADJ

ADJ MOD TW100 Bedienungsanleitung

ADJ

ADJ Vizi BSW 300 Bedienungsanleitung

ADJ

ADJ MDF2PSUX156 Benutzerhandbuch

ADJ

ADJ penta pix Bedienungsanleitung

ADJ

ADJ PAR Z120 RGBW Bedienungsanleitung

ADJ

ADJ Par Z100 3K Bedienungsanleitung

ADJ

ADJ ENCORE PROFILE PRO WW Bedienungsanleitung

ADJ

ADJ DOTZ PAR 100 Bedienungsanleitung

ADJ

ADJ 32 HEX PANEL IP Bedienungsanleitung

ADJ

ADJ Hydro Profile Bedienungsanleitung

ADJ

ADJ EVS3 Bedienungsanleitung

ADJ

ADJ SABER SPOT RGBW Bedienungsanleitung

ADJ

ADJ 7P HEX IP Bedienungsanleitung

ADJ

ADJ Inno Pocket Wash Bedienungsanleitung

ADJ

ADJ wifly bar qa5 Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung