ADJ VIZI BEAM 5RX Bedienungsanleitung

User Manual

VIZI BEAM 5RX

Rev 02/2021

instructions herein are subject to change without notice. ADJ Products, LLC logo and identifying

product names and numbers herein are trademarks of ADJ Products, LLC. Copyright protection

claimed includes all forms and matters of copyrightable materials and information now allowed by

statutory or judicial law or hereinafter granted. Product names used in this document may be trade-

marks or registered trademarks of their respective companies and are hereby acknowledged. All

non-ADJ Products, LLC brands and product names are trademarks or registered trademarks of their

respective companies.

ADJ Products, LLC and all aliated companies hereby disclaim any and all liabilities for property,

equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic

loss associated with the use or reliance of any information contained within this document, and/or as

a result of the improper, unsafe, insucient and negligent assembly, installation, rigging, and opera-

tion of this product.

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment. Please turn o all electrical products when

they are not in use. To avoid power consumption in idle mode, disconnect all electrical equipment from power

when not in use. Thank you!

ADJ Products, LLC - www.adj.com - Vizi Beam 5RX User Manual Page 2

Vizi Beam 5RX Table of Contents

ADJ Products, LLC - www.adj.com - Vizi Beam 5RX User Manual Page 3

General Information 4

Safety Precautions 5

Features | Power Cord Daisy Chain 6

General Instructions | Handling Precautions | Product Registration 7

Important Discharge Lamp Warnings 8

Mounting 9

Set Up 11

Dimensions 13

System Menu 14

DMX Control 17

Offset Menu 18

16 Channel DMX Mode 20

19 Channel DMX Mode 27

Photometric Chart 33

Lamp & Fuse Replacement 34

Lamp Replacement 35

Cleaning | Trouble Shooting 38

Warranty 39

Specifications 40

Please see Important Discharge Lamp Warning section for

important lamp instructions!

Warning! This xture can start a re! Please read Safety Guide-

lines section before installing or operating!

ADJ Products, LLC - www.adj.com - Vizi Beam 5RX User Manual Page 4

Unpacking: Thank you for purchasing the Vizi Beam 5RX by ADJ Products, LLC®. Every Vizi Beam

5RX has been thoroughly tested and has been shipped in perfect operating condition. Carefully check

the shipping carton for damage that may have occurred during shipping. If the carton appears to be

damaged, carefully inspect your xture for any damage and be sure all equipment necessary to oper-

ate the unit has arrived intact. In the event that damage has been found or parts are missing, please

contact our toll free customer support number for further instructions. Please do not return this unit to

your dealer without contacting customer support rst.

Introduction: The Vizi Beam 5RX is a DMX intelligent, moving head xture. The Vizi Beam 5RX can be

operated in 16 DMX channel mode or 19 DMX channel mode. The xture is a DMX controlled unit. For

best results use fog or special eects smoke to enhance the beams projections.

During the initial start-up or use of this product a light smoke or smell may arise from the unit.

This is a normal process and is cause by the heat associated with the lamp.

Customer Support: ADJ Products, LLC® provides a toll free customer support line to provide help and to

answer any questions that might arise during initial set up or operation. You may also visit us on the web

at www.adj.com for any comments or suggestions. Service Hours are Monday through Friday 8:00 a.m. to

4:30 p.m. Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2610

E-mail: [email protected]

To purchase parts online visit http://parts.adj.com.

Warning! To prevent or reduce the risk of electrical shock or re, do not expose this unit to rain or moisture.

Warning! This device can cause severe eye damage. Avoid looking directly into the light source at all times!

WARNING! CAUTION! FIRE HAZARD! DUE TO THE EXTREME HEAT CREATED BY THIS LAMP,

THE MINIMUM DISTANCE TO LIGHTED OBJECTS IS 12 METERS (40FT).

Vizi Beam 5RX General Information

ADJ Products, LLC - www.adj.com - Vizi Beam 5RX User Manual Page 5

Vizi Beam 5RX Safety Precautions

For Your Own Personal Safety, Please Read and Understand This Manual Completely Before

You Attempt To Install Or Operate This Unit!

• To reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.

• Do not spill water or other liquids into or on to your unit.

• Be sure that the local power outlet match that of the required voltage for your unit.

• Do not attempt to operate this unit if the power cord is frayed or broken.

• Do not attempt to remove or break off the ground prong from the electrical cord. This prong is used

to reduce the risk of electrical shock and fire in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user serviceable parts inside.

• Never operate this unit with the cover removed.

• Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm)

between this device and a wall.

• Do not attempt to operate this unit if it has been damaged in any way.

• This unit is intended for indoor use only. Use of this product outdoors voids all warranties.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to be walked on or pinched by

items placed upon or against them, paying particular attention to cords at plugs, convenience

receptacles, and the point at which they exit from the appliance.

• Cleaning - The fixture should be cleaned only as recommended by the manufacturer. See the

Cleaning section of this manual for details.

• Heat - This fixture should be situated away from heat sources such as radiators, heat registers,

stoves, or other appliances (including amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. Objects have fallen onto, or liquid has been spilled into, the appliance.

B. The appliance has been exposed to rain or water.

C. The appliance does not appear to operate normally or exhibits a marked change in perfor-

mance.

Vizi Beam 5RX Features

ADJ Products, LLC - www.adj.com - Vizi Beam 5RX User Manual Page 6

• Philips® Platinum 5R Discharge

• Micro-Stepping Motors for Smooth Color and Gobo Transitions

• 2 Modes of DMX-512 Protocol Compatible (16 DMX Channel Mode or 19 DMX Channel Mode)

• Independent Gobo and Color Wheels

• 17 Static Fixed Gobos + Spot

• 14 Colors, Plus White and Split Colors

• 8 Facet Prism

• Frost Filter

• Strobe Effect

• Built-In Pan/Tilt Macros

• Motorized Focus

• 540˚ Pan Movement

• 270˚ Tilt Movement

• Pan/Tilt Invert

• Digital Display for Address and Function Setting

• Power Cord Daisy Chain Capability (see the following section for details)

Vizi Beam 5RX Power Cord Daisy Chain

Fixtures of this model type are capable of being linked to one another using the power input

and output sockets.

The maximum number of individual fixtures that can be linked in this manner are as follows:

• 3 fixtures maximum for 120V

• 6 fixtures maximum for 240V

Once this maximum number has been reached, a new power outlet will be required in order to

accommodate any additional fixtures.

All connected fixtures must be of the same make and model type. DO NOT mix fixtures.

ADJ Products, LLC - www.adj.com - Vizi Beam 5RX User Manual Page 7

Vizi Beam 5RX General Instructions

To optimize the performance of this product, please read these operating instructions carefully to

familiarize yourself with the basic operations of this unit. These instructions contain important safety

information regarding the use and maintenance of this unit. Please keep this manual with the unit for

future reference.

Vizi Beam 5RX Handling Precautions

Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, as

doing so will void your manufacturer’s warranty. In the unlikely event your unit may require service,

please contact ADJ® customer service.

During operation the housing may become extremely hot. Avoid touching the unit with bare hands

while in use.

ADJ® will not accept any liability for any resulting damages caused by the non-observance of this

manual or any unauthorized modifications to this unit.

Vizi Beam 5RX Product Registration

The Vizi Beam 5RX carries a one year limited warranty. Please fill out the enclosed warranty card to

validate your purchase. All returned service items, whether under warranty or not, must be freight pre-

paid and accompany a return authorization (R.A.) number. The R.A. number must be clearly written

on the outside of the return package. A brief description of the problem as well as the R.A. number

must also be written down on a piece of paper and included in the shipping carton. If the unit is under

warranty, you must provide a copy of your proof of purchase invoice. You may obtain an R.A. number

by contacting our customer support team on our toll free customer support number. All packages

returned to the service department not displaying an R.A. number on the outside of the package will

be returned to the shipper at the shippers cost.

ADJ Products, LLC - www.adj.com - Vizi Beam 5RX User Manual Page 8

Vizi Beam 5RX Important Discharge Lamp Warning

This fixture is fitted with a discharge lamp which is highly susceptible

to damage if improperly handled. Never touch the lamp with your

bare fingers, as the oil from your hands will shorten lamp life. Also,

never move the fixture until the lamps have had ample time to cool.

Remember, lamps are not covered under warranty conditions.

This unit emits intense UV radiation which is harmful to the eyes and

skin. The intense light output of the lamp can cause severe damage to

the retina. Never operate this unit without the covers in place, as these

covers have been specially designed to shield against UV radiation.

Epilepsy Warning: Those suffering from epilepsy should avoid looking directly into the lamp at all

times.

Avoid switching the fixture on and off repeatedly in short intervals, as this will reduce lamp life and

intensity.

To achieve the intensity associated with discharge lamps, these lamps use gas sealed in a high pres-

sure environment to emit a brilliant output. Due to the high pressure involved in the operation of the

lamp, the lamp may explode if subjected to prolonged, extensive use. This risk is increased with age,

and therefore added care is required when dealing with older lamps. Extreme caution should be used

when operating this or any fixture fitted with a gas discharge lamp. Never open this unit while in use.

VERY IMPORTANT: This is notice pertains to your personal safety as well as the preservation of the

fixture. The Philips® Platinum 5R Discharge lamp has a maximum lifetime of 3000 hours.

ADJ strongly recommends conducting periodic, regular checks of the lamp running time. When the

lamp approaches the 3000 hour mark, it is strongly recommended to replace the lamp.

Replace the lamp following the instructions described in the Lamp & Fuse Replacement section

of this manual. After replacing the lamp, you must clear the LAMP RUNNING TIME (see the System

Menu section of this manual for details on this procedure).

Warning: DO NOT exceed 3000 hours of run time on a lamp. Using the lamp any longer then

the maximum rated lifetime could cause serious damage to the fixture.

WARNING! CAUTION! FIRE HAZARD! DUE TO THE EXTREME HEAT CAUSED BY THIS LAMP,

THE MINIMUM DISTANCE TO LIGHTED OBJECTS IS 12 METERS (40FT).

ADJ Products, LLC - www.adj.com - Vizi Beam 5RX User Manual Page 9

Vizi Beam 5RX Mounting

When installing the unit, the trussing or area of installation must be able to hold at least 10 times the

weight of the device without any deformation. The unit must be secured with a secondary safety at-

tachment, such as an appropriate safety cable. Never stand directly below the unit when mounting,

removing, or servicing the unit.

Overhead mounting requires extensive experience, including calculating working load limits, installa-

tion material being used, and perodic safety inspection of all installation material and unit. If you lack

these qualications, do not attempt the installation yourself.

These installation should be checked by a skilled person once a year.

The Vizi Beam 5RX is fully operational in two dierent mounting positions: hanging upside-down

from a ceiling or set on a at level surface. To avoid internal damage to the unit, never mount the unit

on its side, as illustrated above.

Be sure this xture is kept at least 0.5m away from any ammable materials (decoration etc.). Always

use and install an appropriately rated safety cable as a safety measure to prevent accidental damage

and/or injury in the event the clamp fails. Never use the carrying handles for secondary attachment.

NOTICE: The suitable enviromental temperature range for this xture is -25˚Cto45˚C. Do not place

this xture in an enviroment where the temperatures fall outside of this range. This will allow the x-

ture to run at its best and help prolong the xture life.

ADJ Products, LLC - www.adj.com - Vizi Beam 5RX User Manual Page 10

Vizi Beam 5RX Mounting

Attach one clamp to each Omega holder using an M12 screw and nut. Insert the quick-lock fasten-

ers of the rst Omega holder into the respective holes on the bottom of the Vizi Beam 5RX. Tighten

the quick-lock fasteners fully clockwise, then repeat the procedure to install the second Omega

holder. Pull the safety-cable through the openings located on the base plate and over the trussing

system or a safe xation spot. Insert the end in the carabine and tighten the safety screw.

Andere Handbücher für VIZI BEAM 5RX

Inhaltsverzeichnis

Andere ADJ Beleuchtungsausrüstung Handbücher

ADJ

ADJ FOC635 Bedienungsanleitung

ADJ

ADJ UB 6H Bedienungsanleitung

ADJ

ADJ INNO POCKET BEAM Q4 Bedienungsanleitung

ADJ

ADJ Jolt Bar FX Bedienungsanleitung

ADJ

ADJ FLAT PAR TW12 Bedienungsanleitung

ADJ

ADJ Micro Wash RGBW Bedienungsanleitung

ADJ

ADJ FOCUS PROFILE Bedienungsanleitung

ADJ

ADJ SPS-2B Bedienungsanleitung

ADJ

ADJ ACCU-STAND LTS2 AS Bedienungsanleitung

ADJ

ADJ FLAT PAR TW5 Bedienungsanleitung

ADJ

ADJ Jelly Par Profile System Bedienungsanleitung

ADJ

ADJ Lightning COB Cannon Bedienungsanleitung

ADJ

ADJ ENCORE FR50Z Bedienungsanleitung

ADJ

ADJ COB CANNON WASH DW Bedienungsanleitung

ADJ

ADJ PINPOINT GO COLOR Bedienungsanleitung

ADJ

ADJ 12PX HEX PEARL Bedienungsanleitung

ADJ

ADJ ULTRA BAR 10 PLUS PAK Bedienungsanleitung

ADJ

ADJ FLASH KLING BATTEN Bedienungsanleitung

ADJ

ADJ FLAT PAR TW12 Bedienungsanleitung

ADJ

ADJ Par ZP100 3K Bedienungsanleitung

ADJ

ADJ INNO POCKET Z4 Bedienungsanleitung

ADJ

ADJ Dekker LED Bedienungsanleitung

ADJ

ADJ ACCU-STAND LTS 50T AS Bedienungsanleitung

ADJ

ADJ COB CANNON LP200 Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung