ADLINK Technology cPCIS-1100 Series Bedienungsanleitung
cPCIS-1100 Series
3U Height Subsystems for
CompactPCI Modules
User’s Manual
Manual Rev.: 2.00
Date: September 15, 2014
Part Number: 50-15091-2000
Revision History
Revision Release Date Description of Change(s)
2.00 September 15, 2014 Initial release
Copyright 2014 ADLINK Technology, Inc.
All Rights Reserved.
The information in this document is subject to change without prior notice in
order to improve reliability, design and function and does not represent a
commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental,
or consequential damages arising out of the use or inability to use the product
or documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All
rights are reserved. No part of this manual may be reproduced by any
mechanical, electronic, or other means in any form without prior written
permission of the manufacturer.
Trademarks
Product names mentioned herein are used for identification purposes only and
may be trademarks and/or registered trademarks of their respective companies.
Table of Contents
x
iii
Table of Contents
1 Introduction ....................................................................................1
1.1 Product Definition ......................................................................1
1.2 Mechanical Drawing ..................................................................2
1.3 Configurations............................................................................3
1.4 Customized Systems .................................................................3
2 Getting Started ...............................................................................5
2.1 Shipping Contents .....................................................................5
2.2 CompactPCI Board & PSU Installation cPCIS-1100 Series
models with CompactPCI PSU(s) .......................................................5
2.3 RTM (Rear Transition Module) Installation................................8
2.4 Powering Up the System ...........................................................9
3 Backplane .....................................................................................11
3.1 cBP-3208[R] Backplane...........................................................11
Specifications .....................................................................11
Mechanical Drawing ...........................................................12
Pin Assignment...................................................................14
3.2 cBP-3206[R] Backplane...........................................................18
Specifications .....................................................................18
Mechanical Drawing ...........................................................19
Pin Assignment...................................................................20
3.3 cBP-3061 Power Backplane....................................................24
Specifications .....................................................................24
Mechanical Drawing ...........................................................24
Pin Assignment...................................................................25
3.4 cBP-3062A Power Backplane .................................................28
Specifications .....................................................................28
Mechanical Drawing ...........................................................28
Pin Assignment...................................................................29
4 Power Supply Units .....................................................................33
4.1 ATX: Zippy PS2 HG2-6400P ...................................................33
Features .............................................................................33
Specifications .....................................................................33
Input Characteristics...........................................................34
Output Characteristics........................................................34
iv
x
Table of Contents
4.2 CompactPCI: cPS-H325/AC....................................................35
Features .............................................................................35
Specifications .....................................................................35
Input Characteristics...........................................................35
Output Characteristics........................................................36
4.3 CompactPCI ETT PSU: cPS-P325/AC....................................37
Features .............................................................................37
Specifications .....................................................................37
Input Characteristics...........................................................37
Output Characteristics........................................................38
5 Specifications...............................................................................41
5.1 Features...................................................................................41
5.2 Mechanical...............................................................................41
5.3 Environmental..........................................................................42
Important Safety Instructions
...................................................43
Introduction
x
1
1Introduction
1.1 Product Definition
The cPCIS-1100 Series Subsystems are rack mountable, 3U in height, and
designed for 3U CompactPCI cards and modules. They are ideal for
industrial or transport applications where small chassis size with multi-
functionality are important, and provide ample power capacity, a hot swap
backplane and easy maintenance. The cPCIS-ET1100 Series' ability to
handle a wide range of temperatures and excellent shock and vibration
characteristics make it suitable for operation in a rigorous environment. The
cPCIS-ET1100 Series allows for custom configuration, giving system
integrators maximum flexibility to build in specialized functionality.
This user’s manual provides unpacking, operating, and maintenance
information for the cPCI-1100 Series 3U CompactPCI subsystems. The
cPCI-1100 Series subsystems are assembled using the following
components:
Components:
Chassis: cPRK-1100
Power Supply: 3U CompactPCI or ATX PS/2 form factor PSU
Backplane: PICMG 2.0 R3.0 Hot Swap compatibility
cPCIS-1100 Series shown (CPU card is not included)
2
x
Introduction
1.2 Mechanical Drawing
Introduction
x
3
1.3 Configurations
The cPCI-1100 Series comes in the following configurations:
System
Slots
Peripheral
Slots PSU(s) Monitor PICMG
cPCIS-1100A[R] 1 7 400W ATX — 2.0, 2.1
cPCIS-1101[R] 1 7 250W
cPCI — 2.0, 2.1, 2.11
cPCIS-1102[R] 1 7 250W
cPCI (1+1) — 2.0, 2.1, 2.11
cPCIS-1202[R]
(dual system) 1 x 2 5 x 2
250W
cPCI (1 /
1)
— 2.0, 2.1, 2.11
cPCIS-ET1101 1 7 250W ETT
cPCI PSU — 2.0,2.1 2.11
cPCIS-ET1102 1 7
250W ETT
2 x cPCI
PSU
— 2.0, 2.1, 2.11
*All models are available with rear I/O backplanes for Rear Transition
Modules (RTMs) and are indicated by an “R” suffix on the model name.
1.4 Customized Systems
Sub-systems can also be customized to meet individual needs. To customize
a sub-system please contact an ADLINK dealer. For complete systems,
users must order CPU modules in addition to the sub-system.
4
x
Introduction
This page intentionally left blank.
Getting Started
x
5
2Getting Started
In this chapter, we will describe the unpacking procedure of the sub-system
and CompactPCI board and power supply unit (PSU) installation procedures
for cPCIS-1100 Series models with CompactPCI PSU(s) only.
2.1 Shipping Contents
Check the shipping carton for any damage. If the shipping carton and
contents are damaged, please notify the dealer for a replacement. Retain
the shipping carton and packing material for inspection by the dealer. Obtain
authorization before returning any product to ADLINK.
Check that the following items are included in the package. If there are any
missing items, please contact your dealer:
xOne cPCIS-1100 Series sub-system
xThis User’s Manual
xPower cord (either N. American or European)
2.2 CompactPCI Board & PSU Installation
cPCIS-1100 Series models with CompactPCI PSU(s)
The CompactPCI connectors are rigid and require careful handling when
inserted and removed. Improper handling of cards can easily damage the
backplane.
The PSU slot also has an obvious indicator such as a green card guide rail in a
standard CompactPCI chassis (see photos below, chassis in photos are for
reference only).
6
x
Getting Started
System slots have obvious indicators (e.g. red card guide rail, triangle mark
enclosing the slot number on the backplane, etc.) System cards can only be
installed in a system slot. Do not insert a system card into any other slot, or
insert any peripheral card into system slot.
The handle on CompactPCI cards and PSUs ensures simple and safe
installation and removal. Please follow the procedures below to install a
CompactPCI module into a cPCIS-1100 Series chassis with CompactPCI
PSU(s):
S
y
stem Card Slot
Peri
p
heral Card Slots
PSU Slot
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere ADLINK Technology Computerhardware Handbücher
ADLINK Technology
ADLINK Technology aTCA-80606PA Bedienungsanleitung
ADLINK Technology
ADLINK Technology COM-HPC-sIDH Bedienungsanleitung
ADLINK Technology
ADLINK Technology cPCI-3620 Series Bedienungsanleitung
ADLINK Technology
ADLINK Technology cPCI-7300A Bedienungsanleitung
ADLINK Technology
ADLINK Technology NuDAQ PCI-9111DG Bedienungsanleitung
ADLINK Technology
ADLINK Technology NuDAQ DAQ-2500 Series Bedienungsanleitung
ADLINK Technology
ADLINK Technology EBP-13E4 Bedienungsanleitung
ADLINK Technology
ADLINK Technology cExpress-AR Bedienungsanleitung
ADLINK Technology
ADLINK Technology cPCIS-6400U Series Bedienungsanleitung
ADLINK Technology
ADLINK Technology ROScube Pico BSP Bedienungsanleitung
ADLINK Technology
ADLINK Technology aTCA-9710 Bedienungsanleitung
ADLINK Technology
ADLINK Technology cPCI-3970 series Bedienungsanleitung
ADLINK Technology
ADLINK Technology arm AMPERE COM-HPC-ALT Bedienungsanleitung
ADLINK Technology
ADLINK Technology Express-KL2 Bedienungsanleitung
ADLINK Technology
ADLINK Technology COM Express Type 7 Starter Kit Plus Bedienungsanleitung
ADLINK Technology
ADLINK Technology VPX3-TL Series Bedienungsanleitung
ADLINK Technology
ADLINK Technology HPERC-IBR-MC Bedienungsanleitung
ADLINK Technology
ADLINK Technology MXM-P1000 Bedienungsanleitung
ADLINK Technology
ADLINK Technology cPCI-6530 Series Bedienungsanleitung
ADLINK Technology
ADLINK Technology DLAP-211-JNX Series Bedienungsanleitung
Beliebte Computerhardware Handbücher anderer Marken
EMC2
EMC2 VNX Series Betriebsanleitung
Panasonic
Panasonic DV0PM20105 Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung
Gigabyte
Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung
Raidon
Raidon iT2300 Bedienungsanleitung
National Instruments
National Instruments PXI-8186 Bedienungsanleitung
