ADLINK Technology DB-8151 Bedienungsanleitung
Advance Technologies; Automate the World.
Manual Rev. 2.00
Revision Date: May 20, 2008
Part No: 50-14009-2000
DB-8151
Modulized Function Board - HSL
User’s Manual
Copyright 2008 ADLINK TECHNOLOGY INC.
All Rights Reserved.
The information in this document is subject to change without prior
notice in order to improve reliability, design, and function and does
not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, spe-
cial, incidental, or consequential damages arising out of the use or
inability to use the product or documentation, even if advised of
the possibility of such damages.
This document contains proprietary information protected by copy-
right. All rights are reserved. No part of this manual may be repro-
duced by any mechanical, electronic, or other means in any form
without prior written permission of the manufacturer.
Trademarks
NuDAQ, NuIPC, DAQBench are registered trademarks of ADLINK
TECHNOLOGY INC.
Product names mentioned herein are used for identification pur-
poses only and may be trademarks and/or registered trademarks
of their respective companies.
Getting Service from ADLINK
Customer Satisfaction is top priority for ADLINK Technology Inc.
Please contact us should you require any service or assistance.
ADLINK TECHNOLOGY INC.
Web Site: http://www.adlinktech.com
TEL: +886-2-82265877
FAX: +886-2-82265717
Address: 9F, No. 166, Jian Yi Road, Chungho City,
Taipei, 235 Taiwan
Please email or FAX this completed service form for prompt and
satisfactory service.
Company Information
Company/Organization
Contact Person
E-mail Address
Address
Country
TEL FAX:
Web Site Product Information
Product Model
Environment OS:
M/B: CPU:
Chipset: BIOS:
Please give a detailed description of the problem(s):
Table of Contents i
Table of Contents
List of Tables.......................................................................... iii
List of Figures........................................................................ iv
1 Introduction ........................................................................ 1
1.1 Specifications....................................................................... 5
1.2 Supported Software............................................................. 6
2 Installation .......................................................................... 7
2.1 Package Contents ............................................................... 7
2.2 DB-8151 and DB-8151-RJ45 Outline Drawing .................... 8
2.3 DB-8151 Hardware Installation.......................................... 10
Hardware configuration .................................................10
Installation Procedures .................................................10
Troubleshooting: ...........................................................11
2.4 Software Driver Installation................................................ 12
2.5 DB-8151 Pin Assignments................................................. 13
CN3 Pin Description .....................................................13
2.6 DB-8151-RJ45 Pin Assignments....................................... 14
CN1 Pin Description .....................................................14
RJ1 Pin Description ......................................................15
3 HSL Slave Module............................................................ 17
3.1 Slave I/O Module ............................................................... 18
Discrete I/O Module ......................................................18
Analog I/O Module ........................................................19
Motion Control ..............................................................19
General Specifications ..................................................20
DIP Switch Setting: .......................................................22
Wiring Diagram .............................................................23
3.2 Terminal Base.................................................................... 29
General Description ......................................................29
Jumper Settings ............................................................30
HSL-TB32-MD Jumper Settings ...................................31
Dimensions ...................................................................32
3.3 HSL-HUB/Repeater ........................................................... 34
General Description ......................................................34
Jumper Setting ..............................................................35
ii Table of Contents
Dimensions ...................................................................36
3.4 Managing Slave Index in an HSL Network ........................ 37
Before you proceed ......................................................37
Examples ......................................................................39
4 HSL LinkMaster Utility for DB-8151................................. 43
4.1 Software Installation........................................................... 44
4.2 ADLINK HSL LinkMaster Utility.......................................... 45
Launching the LinkMaster Utility ...................................45
About the LinkMaster Utility ..........................................46
LinkMaster Utility Introduction .......................................47
HSL-DI16DO16 Utility ...................................................50
HSL-DI32 and HSL-DO32 Utility ...................................51
HSL-DI8/HSL-DO8/HSL-DI4DO4 Utility .......................52
HSL-R8DI16 Utility ........................................................54
HSL-AI16AO2 Utility .....................................................55
HSL-4XMO Utility ..........................................................56
5 Function Library: PCI-8154 + DB-8151............................ 57
5.1 List of Functions................................................................. 57
5.2 Initialization & System Information..................................... 62
5.3 Discrete I/O........................................................................ 67
5.4 Analog I/O.......................................................................... 77
Appendix A Scan Time Table........................................... 85
A.1 Full Duplex Mode .............................................................. 85
A.2 Half Duplex Mode ............................................................. 86
Appendix B HSL-AI16AO2 Calibration ............................ 87
B.1 Before you proceed............................................................ 87
B.2 Calibrating the modules..................................................... 88
Appendix C HSL-HUB/Repeater Information.................. 89
C.1 Recommended transfer rates, total extension distance, and
number of installed HSL-HUB/Repeater.................. 89
C.2 Scan time table.................................................................. 89
Full duplex/12 Mbps ......................................................89
Full duplex/6 Mbps ........................................................90
Full duplex/3 Mbps ........................................................90
List of Tables iii
List of Tables
Table 1-1: DB-815x Series ........................................................ 1
Table 2-1: DB-8151 CN3 Pin Assignment ............................... 13
Table 2-2: DB-8151-RJ45 CN1 Pin Assignment ...................... 14
Table 2-3: DB-8151-RJ45 RJ1 Pin Assignment ...................... 15
iv List of Figures
List of Figures
Figure 1-1: Block Diagram of the DB-8151.................................. 4
Figure 2-1: DB-8151 PCB Layout ................................................ 8
Figure 2-2: DB-8151-RJ45 PCB Layout....................................... 9
Figure 2-3: Board Configuration................................................. 10
Figure 4-1: PCI-8154/58 Installation Page................................. 44
Figure 4-2: HSL LinkMaster Utility ............................................. 45
Figure 5-1: HSL DI Interrupt for Example#1............................... 69
Figure 5-2: HSL DI Interrupt for Example#2............................... 70
Figure 5-3: HSL DI Interrupt for Example#3............................... 70
Introduction 1
1 Introduction
In order to increase the available functions on the PCI-8154/58 4-
axis/8-axis pulse train output control channel carrier board,
ADLINK offers four daughter boards providing a variety of func-
tions. These DB-815x daughter boards can only be used with the
PCI-8154/58 carriers only. Additional functionality provided by the
DB-815x series includes high-speed triggering and distributed I/O
control. Daughter boards can be added based on application
requirements. The four daughter boards in the DB-815x series
are:
The DB-8151 offers an HSL (High Speed Link) system for distrib-
uted I/O on the PCI-8154/58. HSL is an innovative distributed I/O
Model Name Primary Function Description
DB-8150 High Speed Trigger Out
XHigh speed trigger pulse out
up to 1 MHz
XSimultaneous 8 differential
trigger output
X2 channels encoder input
(from external I/F or carrier.
FIFO/Linear function com-
pared trigger output
DB-8151 HSL Master Controller XHigh Speed Link for distrib-
uted I/O
DB-8152 ECAM Controller
X2 channel encoder input
(Master & slave)
XMaster/Slave controller
XEasytoimplement electronic
cam behavior
DB-8153 Motionnet Master Controller
XSerial single axis motion
control bus
XDoes not support I/O func-
tion
Table 1-1: DB-815x Series
2 Introduction
technology which allows thousands of I/O points to be scanned at
the millisecond-level in real time by using mater-slave architec-
ture. Commercial Ethernet cables with RJ45 connector are used
for simplified setup of the HSL slaves modules as close as possi-
ble to sensor devices, again, resulting in a dramatic reduction of
wiring. System integrators can benefit from HSL network because
it integrates discrete I/O, and analog I/O. This local network fea-
tures rapid response, real-time scanning. Integration of multi-axis
operations can also be accomplished with the DB-8151 module as
the HSL architecture is ready to use on a parallel multi-axis con-
troller.
Inhaltsverzeichnis
Andere ADLINK Technology Hauptplatine Handbücher
ADLINK Technology
ADLINK Technology NuPRO-E330 Bedienungsanleitung
ADLINK Technology
ADLINK Technology com express Bedienungsanleitung
ADLINK Technology
ADLINK Technology cPCI-6860A Series Bedienungsanleitung
ADLINK Technology
ADLINK Technology IMB-M45H Bedienungsanleitung
ADLINK Technology
ADLINK Technology NuPRO-A40H Bedienungsanleitung
ADLINK Technology
ADLINK Technology NuPRO-842DV/P Bedienungsanleitung
ADLINK Technology
ADLINK Technology IMB-M46 Bedienungsanleitung
ADLINK Technology
ADLINK Technology IMB-M43H Bedienungsanleitung
ADLINK Technology
ADLINK Technology NuPRO-761 Bedienungsanleitung
ADLINK Technology
ADLINK Technology NuPRO-A301 Bedienungsanleitung
ADLINK Technology
ADLINK Technology LEC-iMX6 Gebrauchs- und Pflegehandbuch
ADLINK Technology
ADLINK Technology cExpress-AL Bedienungsanleitung
ADLINK Technology
ADLINK Technology NuPRO-775 Series Bedienungsanleitung
ADLINK Technology
ADLINK Technology IMB-M43H Bedienungsanleitung
ADLINK Technology
ADLINK Technology cPCI-6965 Series Bedienungsanleitung
ADLINK Technology
ADLINK Technology CoreModule 430 Bedienungsanleitung
ADLINK Technology
ADLINK Technology CoreModule 745 Bedienungsanleitung
ADLINK Technology
ADLINK Technology AmITX-CF-G Bedienungsanleitung
ADLINK Technology
ADLINK Technology CoreModule 740 Bedienungsanleitung
ADLINK Technology
ADLINK Technology AmITX-BE-G Bedienungsanleitung
Beliebte Hauptplatine Handbücher anderer Marken
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Bedienungsanleitung
Gigabyte
Gigabyte GA-9IVDT Bedienungsanleitung
Texas Instruments
Texas Instruments ADS8372EVM Bedienungsanleitung
Commell
Commell MS-C73 Bedienungsanleitung
IBT Technologies
IBT Technologies MB860 Bedienungsanleitung
Nvidia
Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung
