Adtec DTA-3150 Bedienungsanleitung

benefits

Digital television service operators wishing to

re-distribute MPEG or DVB based services as next

generation IPTV based services will find the DTA ideal.

Available inputs on the DTA-3150 model include two ASI,

two satellite and two DVB-T terrestrial. Inputs options

for the DTA-3154 include two ASI and four DVB-T

terrestrial. All Adtec DTA models have GIGE output,

optional ASI output and support multicast and unicast

configurations including SPTS/UDP or RTP, MPTS/UPD or

RTP. Additionally they support MPEG and DVB tables and

conditional access capabilities including decryption and

encryption. The DTA 315x is ideal

for next generation television

networks focused on IPTV.

applications

• Telco IPTV / Broadband IPTV: Cost

effective and reliable delivery of video, audio

and data services to an unlimited number of

consumer set top boxes or PC/MAC clients on

an IP network.

• Satellite (DVB-S) Digital TV: Turnaround

of digital satellite programming to IPTV or ASI,

without the need for external QPSK receivers.

(DTA 3150)

• Terrestrial (DVB-T) Digital TV: Turnaround

of digital terrestrial programming to IPTV or

ASI, without the need for external COFDM

receivers. (DTA-3150, 3154)

• IP over MPEG 2 Transport: Delivery of IP

data services to set top boxes or computers

over MPEG-2 transport using IP encapsulation.

• Conditional Access: The DTA-3150 and DTA-3154

provide DVB-CSA and AES conditional access decryption

and encryption capabilities. DVB-CSA decryption is

facilitated through two rear mounted CACI slots and

encryption is available as fixed key BISS or Simulcrypt

based interfaces compatible with most major DVB-CSA CAS

vendors. AES decryption and encryption includes support

for Adtec’s OST and Verimatrix VCAS for set top and

computer-based decryption.

• Integrated DVB-S and DVB-T Tuners: The

DTA-3150 features two integrated QPSK satellite tuners for

receiving programming delivered via DVB-S and two

integrated COFDM tuners for receiving terrestrial DVB-T.

The DTA-3154 features four integrated COFDM tuners with

the two ASI inputs.

• Aggregation of ASI SPTS or MPTS services:

The DTA-3150 and DTA-3154 offer two DVB-ASI input ports

enabling it to aggregate locally encoded SPTS or re-muxed

MPTS from another router or receiver.

• IPTV: Gigabit Ethernet distribution of digital television

services includes SPTS over UDP or RTP for Set Top and

computer decoding and MPTS over UDP or RTP for bundled

distribution.

• ASI: An optional 3 port mirrored ASI output interface

provides integration with traditional distribution methods

including Cable, Satellite, and Terrestrial.

• Flexible Configuration & Control: Controlling and

configuring the DTA-3150 and DTA-3154 is easy. Whether using the

integrated front panel keypad with LCD, Terminal or remote Web

page interface, they respond rapidly and reliably to the desires of

the operator.

• IPTV Electronic Program Guide: Adtec’s edjeGuide

Server integrates seamlessly with our DTA routers to deliver an

interactive electronic program guide to IP based Set Tops or a

PC/MAC edjePlayer and includes support for many IP based Set

Tops. Adtec’s edjeVOD enterpise VOD server, an optional service

installed on the edjeGuide server, is ideal for small stream count

implementations like medical, educational or hospitality. Interfaces

to external VOD servers facilitate large stream count VOD

requirements including direct to home Telco TV.

Adtec Digital US Sales: 615.256.6619 International Sales 904.394.0389 www.adtecinc.com

09.25.2006

TATA

availability

models

IP ASI

DTA-3150

DTA-3150-ASI

outputs

DTA-3154

DTA-3154-ASI

ASI DVB-S

inputs

DVB-T

315x Digital Turn Around Router

The DTA-315x series is speciﬁcally designed for turning

MPEG or DVB based digital television services via ASI,

Satellite, or Terrestrial distribution into IP

distribution. It is ideal for Telco TV and

Broadband TV systems utilizing MPEG 2

or MPEG 4 AVC (H.264).

TATA

NEW

Power GigE

IEEE 1394 FireWire

Terminal Interface Fast Ethernet Interface

ASI Redundancy

Inputs

ASI Inputs QPSK Inputs Terrestrial Cable Inputs

Redundancy Tally ASI Outputs

USB 2.0 Interface

GPIO or Serial Port

CACI Slots

The DTA-3154 does not

have QPSK Input ports.

They are replaced with 2

additional DVB-T inputs.

Front Panel

• 8 Button Tactile Raised keypad:

Mode, Select, Enter, Escape, Up, Down, Left, Right

• Blue Translucent LCD

20 character by 2 row

• Front Panel Host LED’s

Power, Alarm, Link, Busy, MPE

• Front Panel LEDs

Out (Alarm, ASI, GigE, CA)

DTA-3150 Speciﬁc

In (2 - ASI Ports, DVB-S 3 Port and Lock , DVB-S

4 Port and Lock, DVB-T 5 Port and Lock, DVB-T 6

Port and Lock)

DTA-3154 Speciﬁc

In (2 - ASI Ports, DVB-T 3 Port and Lock , DVB-T

4 Port and Lock, DVB-T 5 Port and Lock, DVB-T 6

Port and Lock)

ASI Inputs

• ASI x 2 (BNC)

• 188 or 204 Byte mode

• SPTS or MPTS

• 211 Mbps per input

• 256 PIDs per input

• Fill scrubbing on input

• Input Modes

Auto (Remap all services)

Manual (Add/Drop/Remap PID/Services)

Pass (Pass all services as-is)

MHP Injector

SI Injector

QPSK Inputs (Satellite)

3150 (2) 3154 (0)

• QPSK

• Antenna Input

L-Band Input 950 – 2150 MHz

• Input Level

-65 dB to –25 dB

• LNB Power

Automatic Polarity Sensing

(Horizontal - 14V-Vertical - 18V)

Automatic Over and Under Current Protection

22 KHz Tone

(High Frequency Block Up-convert)

DiSEqC

• Symbol Rate

2 to 45 MS/s

• Forward Error Correction (Physical)

DVB Viterbi FEC

Automatic Sensing

1/2, 2/3, 3/4, 5/6, 7/8

Reed Solomon (16 bits)

• 188 or 204 Byte mode

• SPTS or MPTS

• 72 Mbps per input

Note: Speciﬁcations subject to change without written notice

• 256 PIDs per input

• Fill scrubbing on input

• Modes

Same as ASI

Redundancy

• 1+1 IP and ASI

• ASI x 2 (BNC inputs for auto switch)

• No external controller required

DVB-T Inputs (Terrestrial)

3150 (2) 3154 (4)

• COFDM x 2 (Type F Female)

• Antenna Input

UHF: 470 MHz to 862 MHz

VHF: 174 MHz to 230 MHz

• Input Level

-88 dB to –20 dB

• Channel Bandwidth

6, 7 or 8 MHz

• Channel Assignment

CCIR Channel and +/- 166.666 KHz offset

• Functional

2k and 8k carrier non hierarchical and hierarchical

(DVB-T and DTG compliant)

• Modulation Modes

QPSK, 16 QAM, 64 QAM

• Guard Interval Modes

1/32, 1/16, 1/8, ¼ active symbol duration

Automatic Sensing

• Forward Error Correction (Physical)

DVB Viterbi FEC

Automatic Sensing

1/2, 2/3, 3/4, 5/6, 7/8

• 188 or 204 Byte mode

• SPTS or MPTS

• 72 Mbps per input

• 256 PIDs per input

• Fill scrubbing on input

• Modes

Same as ASI

Outputs

• Gigabit Ethernet

SPTS over UDP or RTP

MPTS over UDP or RTP

150 Mbs

Very low jitter

Output Options

• ASI (model is DTA 3150-ASI)

ASI Mirrored (BNC x 3)

Byte or Burst Mode

54 Mbs Byte

211 Mbs Burst

Jitter less than 150 (nS)

Table Processing

• No Tables

• MPEG Tables

PAT

CAT (if CA is enabled)

PMT

• DVB Tables (Add/Drop/Remap DVB Services)

NIT

SDT

TDT/TOT

EIT

• ATSC Tables (Add/Drop/Remap ATSC Services)

VCT (Cable or Terrestrial)

MGT

STT

RRT

EIT (1-4)

• DCII Tables (Add/Drop/Remap Digicypher services

to DVB or ATSC)

IP Data Encapsulation (ISO 13818-6 MPE)

• EN 301 192 Encapsulation of IP Datagrams over

• Unicast and Multicast Support

• 32 Routes

• 32 PIDs

IP Data de-capsulation (ISO 13818-6 MPE)

• EN 301 192 de-capsulation of IP Datagrams

• 16 PiDs

• 300 Mbs

Conditional Access Encryption

• DVB-Common Scrambling Algorithm (CSA)

• DVB Simulcrypt TS 103 197 v 1.2.1 and SCTE

OpenCAS™ DVS-278 compliant

• FIPS 140-2 hardware based random number

generator (RNG)

• Advanced Encryption Standard (AES)

Adtec Open Secure Transport (OST)

IP based encryption for use with Adtec IRDs

IP Set Top and Computer compatibility

• Current 3rd Party CA Vendors include:

• CSA:

Irdeto

Conax

EuroCAS

KeyFly

Xcrypt

• AES:

Verimatrix

Host Platform

• PowerPC

• Adtec optimized Linux Kernel

• 10/100 Ethernet RJ-45 (Eth 0)

• 10/100/1000 Ethernet RJ-45 (Eth 1)

• Serial Port (RJ-48)

• USB 2.0 (2)

• IEEE 1394 (Firewire)

• N.C. / N.O. Tally Interface

• XML Conﬁguration

• HTTP, FTP, Telnet, IP Logging, DHCP,

(XCP Adtec encrypted layer 3 protocol)

Power

• 70-240 VAC switching power supply

• 50/60 Hertz

• Rated at 94 Watts return nominal usage 20 watts

Physical

• 19” wide, 1.75” tall, 16” deep, (483 x 44.5 x 406 mm)

• 1 Rack Unit

• Weight 13lbs.

Environmental

• Active cooling (Push pull Fans)

• Operating: 0 to +50 degrees C

• Storage: -30 to +65 degrees C

• Less than 70% RH

• Non-Condensing

• DTA 3150 or 3154 Digital Turn Around Router

• Accessory Kit: One 3 pin alarm tally plug,

four rack mount screws with washers.

• Communication Kit to connect the unit to

an external computer via RS232 (Adtec

PN: comkit2). The kit includes an RJ-48

line to a DB-9F connector.

• Adtec Startup CD

• DTA Operations Manual

• Ethernet Cable (10 foot long) Used for

LAN/WAN or Terminal connectivity

• US Power Cord (6 foot long)

Dieses Handbuch passt für folgende Modelle

Andere Adtec Netzwerk-Router Handbücher

Adtec

Adtec DTA-3250 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise