Cisco 805 Series Bedienungs- und Sicherheitshinweise
CHAPTER
Product Overview 1-1
1
Product Overview
The Cisco 805 router can connect a remote office to a corporate office or a small
professional office to an Internet service provider (ISP).
In the remote-office-to-corporate-office network, the remote office is typically a small
professional office that is part of a larger corporation, such as a real estate office. Although
amajorityofitsdatamightexistattheremoteofficeitself,theremoteofficemightalsoneed
to exchange data with its larger corporate office. As a result, the remote office needs a
connection to the corporate office.
In the small-office-to-ISP network, the small office is typically a small, independent
professional office,such as a small architectural firm that needs to access information from
the Internet.
Features Table 1-1 summarizes the features of the Cisco 805 router.
Table 1-1 Cisco 805 Feature Summary
Feature Description
10BaseT Ethernet port Provides connection to a 10BaseT (10 Mbps) Ethernet network.
Compatible with a 10/100-Mbps device.
Serial port Provides connection to EIA/TIA-232, EIA/TIA-449, EIA/TIA-530,
EIA/TIA-530A, X.21, and V.35 data terminal equipment (DTE) or
data communications equipment (DCE).
RJ-45 Console port Provides connection to terminal or PC for software configuration
and for router troubleshooting.
Features
Cisco 805 Router Hardware Installation Guide
1-2
Flash memory Router provides 4 MB of Flash memory.1
Dynamic RAM (DRAM) Router provides 8 MB of DRAM.1
Ease of installation Color-coded ports and cables reduce the chance of error.
Cisco IOS software Router supports a subset of Cisco IOS software.
Cisco 805 Fast Step
software Provides a Windows 95, Windows 98, and Windows NT software
tool for basic Cisco 805 configuration.
Cable lock Provides a way to physically secure router.
Locking power connector Locks power connector in place.
Wall-mount feature Brackets on router bottom provide a way to mount router on wall or
vertical surface.
1 An additional 4 or 8 MB of Flash memory and DRAM can be added at the factory or later. You can order
upgrade kits and have qualified personnel add the memory. The Cisco product number for the 4-MB Flash
memory upgrade kit is MEM805-4U8F, for the 8-MB Flash memory upgrade kit it is MEM805-4U12F, for
the 4-MB DRAM upgrade kit it is MEM805-8U12D, and for the 8-MB DRAM upgrade kit it is
MEM805-8U16D. (Because of the height of the actual DRAM component, you must order the additional
DRAM from Cisco.)
Table 1-1 Cisco 805 Feature Summary (continued)
Feature Description
Product Overview 1-3
Front Panel
Front Panel
Figure 1-1 describes the Cisco 805 front panel.
Figure 1-1 Cisco 805 Front Panel
For more details, see the “LEDs” section later in this chapter.
Back Panel
Figure 1-2 describes the Cisco 805 back panel.
If the symbol of suitability ( ) appears above a port, you can connect the port directly to a
public network that follows the European Union standards.
If the symbol of suitability with an overlaid cross ( ) appears above a port, you must not
connect the port to a public network that follows the European Union standards.
Connecting the port to this type of public network can cause severe injury or damage your
router.
OK LED
Indicates
router
has power.
LAN LEDs
Indicate packets
are sent to or
received from
Ethernet port.
WAN LEDs
Indicate packets
are sent to or
received from
serial port.
17281
Back Panel
Cisco 805 Router Hardware Installation Guide
1-4
Figure 1-2 Cisco 805 Back Panel
With the HUB/NO HUB button, you can connect hubs, servers, PCs, and workstations
using the yellow Ethernet (straight-through) cable instead of using a crossover Ethernet
cable, which you would need to supply. This button identifies the device that you
connect to the router Ethernet port using the yellow Ethernet cable. Setting the button
to HUB (in) indicates that you are connecting a hub; setting the button to NO HUB (out)
indicates that you are connecting a server, PC, or workstation. The default setting of this
buttonisHUB.IfyouresetthebuttontoNOHUB,therouterEthernetconnectorcrosses
over the signals transmitted to and received from the yellow Ethernet cable. For
information on how the setting of an equivalent hub button can affect the setting of this
router button, refer to the “Connecting an Ethernet Device” section in Chapter 2,
“Installing the Cisco 805 Router.”
17282
Cisco 805
LINK
HUB
NO HUB
ETHERNET
10 BASE T
Cable lock
Physically
secures
router.
LINK LED
Indicates state
of Ethernet port.
On when connected.
HUB/NO HUB button
(for Ethernet port)
Identifies device
connected to Ethernet
port and determines
Ethernet cable.
Ethernet port
Connects Ethernet
network device.
Console port
Connects PC or
terminal.
Locking power
connector
Connects power
supply.
Power switch
l = On
= Standby or no power output
Serial port
Connects modem
or CSU/DSU.
SERIAL
CONSOLE
Product Overview 1-5
LEDs
LEDs Table 1-2 summarizes the function of each LED. All LEDs are on the router front panel
except for the LINK LED, which is on the router back panel.
Table 1-2 LED Functions
LED Corresponding
Port/Component Color Function
OK Power Green On when power is supplied to the router and when the router
completes the self-test procedure and begins operating.
LAN Ethernet Green On when the Ethernet interface is up.
Off when the Ethernet interface has been shut down.
RXD
(Received)
Ethernet Green Blinks when the Ethernet port receives a packet.
TXD
(Transmitted)
Ethernet Green Blinks when the Ethernet port sends a packet.
CD
(Carrier detect)
Serial Orange On when the serial interface is up and a carrier signal is detected.
Off when a carrier signal is not detected.
RXD
(Received)
Serial Orange Blinks when the serial port receives a packet.
TXD
(Transmitted)
Serial Orange Blinks when the serial port sends a packet.
LINK Ethernet Green On when Ethernet device is connected.
Off when the connection has a problem. Refer to the Chapter 3,
“Troubleshooting.”
LEDs
Cisco 805 Router Hardware Installation Guide
1-6
Andere Handbücher für 805 Series
6
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Cisco Netzwerk-Router Handbücher
Cisco
Cisco ASR 9000 Series Montageanleitung
Cisco
Cisco NCS 5500 Series Bedienungsanleitung
Cisco
Cisco RV345 Bedienungsanleitung
Cisco
Cisco ASR 1000 Series Bedienungsanleitung
Cisco
Cisco NCS 500 Series Originalbetriebsanleitung
Cisco
Cisco 2610 - Router - EN Bedienungsanleitung
Cisco
Cisco Linksys WRT610N Bedienungsanleitung
Cisco
Cisco N5010P-N2K-BE Bedienungsanleitung
Cisco
Cisco AGS+ Bedienungsanleitung
Cisco
Cisco ISR G2 Series Bedienungsanleitung
Cisco
Cisco 811 Bedienungsanleitung
Cisco
Cisco WRT400N Einrichtungshandbuch
Cisco
Cisco ASR 920 series Bedienungsanleitung
Cisco
Cisco 7000 and 7507 LED Board MAS-7KLED Leitfaden
Cisco
Cisco WRT610N - Simultaneous Dual-N Band Wireless... Bedienungsanleitung
Cisco
Cisco ASR 9000 Series Bedienungsanleitung
Cisco
Cisco ASR 1004 Installationsanleitung
Cisco
Cisco 3800 Series Bedienungsanleitung
Cisco
Cisco SOHO 91 Bedienungsanleitung
Cisco
Cisco ONS 15454 Series Bedienungsanleitung
