ADTRAN ATLAS 800 Series Module QUAD E1 Bedienungsanleitung

ATLAS 800

User Manual

Part Number 1200180L1

Part Number 1200227L1

61200180L1-1B

March 1999

TRADEMARKS

Windows is a registered trademark of Microsoft Corporation.

DMS 100 is a registered trademark of Northern Telecom.

5ESS is a registered trademark of AT&T.

AT&T is a registered trademark.

901 Explorer Boulevard

P.O. Box 140000

Huntsville, AL 35814-4000

(256) 963-8000

Printed in U.S.A.

iii

ADTRAN Year 2000 (Y2K) Readiness Disclosure

ADTRAN has established a Year 2000 program to ensure that our products will correctly function in

the new millennium. ADTRAN warrants that all products meet Year 2000 specifications regardless of

model or revision. Information about ADTRAN's Year 2000 compliance program is available at the fol-

lowing:

Product Matrix www.adtran.com/y2kfax.html

E-mail year2000@adtran.com

Faxback Document Line (256) 963-8200

Y2K plans and product certifications are listed in the Product Matrix

(see above)

Y2K Project Line (256) 963-2200

FCC regulations require that in this manual the following information be provided to the

customer:

1. This equipment complies with Part 68 of the FCC rules. The required label is affixed to the bottom

of the chassis.

2. An FCC-compliant telephone cord and modular plug is provided with this equipment. This equip-

ment is designed to be connected to the telephone network or premises wiring using a compatible

modular jack which is Part 68-compliant. See Chapter 2, Installing the ATLAS 800, for details.

3. If your telephone equipment (ATLAS) causes harm to the telephone network, the telephone com-

pany may discontinue your service temporarily. If possible, they will notify you in advance. But

if advance notice isn’t practical, you will be notified as soon as possible. You will be advised of your

right to file a complaint with the FCC.

4. Your telephone company may make changes in its facilities, equipment, operations, or procedures

that could affect the proper operation of your equipment. If they do, you will be given advance

notice to give you an opportunity to maintain uninterrupted service.

5. If you experience trouble with this equipment (ATLAS), please contact ADTRAN at (256) 963-8000

for repair/ warranty information. The telephone company may ask you to disconnect this equip-

ment from the network until the problem has been corrected or until you are sure the equipment is

not malfunctioning.

6. This unit contains no user-serviceable parts.

7. The following information may be required when applying to your local telephone company for

leased line facilities.

Service Type REN/SOC FIC USOC

1.544 Mbps - SF 6.0N 04DU9-BN RJ-48C

1.544 Mbps - SF and B8ZS 6.0N 04DU9-DN RJ-48C

1.544 Mbps - ESF 6.0N 04DU9-1KN RJ-48C

1.544 Mbps - ESF and B8ZS 6.0N 04DU9-1SN RJ-48C

ISDN 6.0N 04DU9-ISN RJ-48C

Federal Communications Commission Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pur-

suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to radio frequencies. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

Shielded cables must be used with this unit to ensure compliance with Class A FCC limits.

Change or modifications to this unit not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Affidavit Requirements for Connection to Digital Services

• An affidavit is required tobe given to the telephone company whenever digital terminal equipment

without encoded analog content and billing protection is used to transmit digital signals contain-

ing encoded analog content which are intended for eventual conversion into voiceband analog sig-

nals and transmitted on the network.

• The affidavit shall affirm that either no encoded analog content or billing information is being

transmitted or that the output of the device meets Part 68 encoded analog content or billing protec-

tion specifications.

• End user/customer will be responsible for filing an affidavit with the local exchange carrier when

connecting unprotected customer premise equipment (CPE) to 1.544 Mbps or subrate digital ser-

vices.

• Until such time as subrate digital terminal equipment is registered for voice applications, the affi-

davit requirement for subrate services is waived.

vii

Affidavit for Connection of Customer Premises Equipment

to 1.544 Mbps and/or Subrate Digital Services

For the work to be performed in the certified territory of ________________________(telco name)

State of ________________

County of ________________

I, _____________________________ (name), __________________________________(business address),

____________________ (telephone number) being duly sworn, state:

I have responsibility for the operation and maintenance of the terminal equipment to be connected to

1.544 Mbps and/or ________ subrate digital services. The terminal equipment to be connected com-

plies with Part 68 of the FCC rules except for the encoded analog content and billing protection speci-

fications. With respect to encoded analog content and billing protection:

( ) I attest that all operations associated with the establishment, maintenance, and adjustment of the

digital CPE with respect to analog content and encoded billing protection information continu-

ously complies with Part 68 of the FCC Rules and Regulations.

( ) The digital CPE does not transmit digital signals containing encoded analog content or billing

information which is intended to be decoded within the telecommunications network.

( ) The encoded analog content and billing protection is factory set and is not under the control of the

customer.

I attest that the operator(s)/maintainer(s) of the digital CPE responsible for the establishment, mainte-

nance, and adjustment of the encoded analog content and billing information has (have) been trained

to perform these functions by successfully having completed one of the following (check appropriate

blocks):

( ) A. A training course provided by the manufacturer/grantee of the equipment used to encode

analog signals; or

( ) B. A training course provided by the customer or authorized representative, using training mate-

rials and instructions provided by the manufacturer/grantee of the equipment used to encode

analog signals; or

( ) C. An independent training course (e.g., trade school or technical institution) recognized by the

manufacturer/grantee of the equipment used to encode analog signals; or

( ) D. In lieu of the preceding training requirements, the operator(s)/maintainer(s) is (are) under the

control of a supervisor trained in accordance with _________ (circle one) above.

viii

I agree to provide ______________________ (telco’s name) with proper documentation to demonstrate

compliance with the information as provided in the preceding paragraph, if so requested.

_________________________________Signature

_________________________________Title

_________________________________ Date

Transcribed and sworn to before me

This ________ day of ________, 199___

_________________________________

Notary Public

My commission expires:

_________________________________

Canadian Equipment Limitations

Before installing this equipment, users should ensure that it is permissible to be connected to the facil-

ities of the local telecommunications company. The equipment must also be installed using an accept-

able method of connection. In some cases, the company's inside wiring associated with a single line

individual service may be extended by means of a certified connector assembly (telephone extension

cord). The customer should be aware that compliance with the above conditions may not prevent deg-

radation of service in some situations.

Repairs to certified equipment should be made by an authorized Canadian maintenance facility desig-

nated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment

malfunctions, may give the telecommunications company cause to request the user to disconnect the

equipment.

Users should ensure for their own protection that the electrical ground connections of the power util-

ity, telephone lines and internal metallic waterpipe system, if present, are connected together. This

precaution may be particularly important in rural areas.

The Load Number (LN) assigned to each terminal device denotes the percentage of the total load to be

connected to a telephone loop which is used by the device, to prevent overloading. The termination

on a loop may consist of any combination of devices subject only to the equipment that the total of the

LNs of all devices does not exceed 100.

The ringer equivalence number (REN) assigned to each terminal adapter is used to determine the total

number of devices that may be connected to each circuit. The sum of the RENs from all devices in the

circuit should not exceed a total of 5.0.

The Industry Canada Certification label identifies certified equipment. This certification means that

the equipment meets certain telecommunications network protective, operational, and safety

requirements. The Department does not guarantee the equipment will operate to the user's

satisfaction.

Users should not attempt to make such connections themselves, but should contact the appropriate

electric inspection authority, or an electrician, as appropriate.

About this Manual

The ATLAS_800 system consists of the Base Unit and one or more option modules. (Each option mod-

ule includes its own user manual which contains specific information about installing, configuring,

and testing the option module; insert the option module manuals into this binder.) This ATLAS User

Manual provides the information you need to install, configure, test, and troubleshoot the ATLAS_800

system; when applicable, this manual refers you to the individual option module user manual. The

arrangement of this user manual allows you to quickly and easily find the information you need. An

overview of the contents of this manual follows:

Introduction

• Chapter1, Introducingthe ATLAS 800, familiarizes you with the ATLAS_800 BaseUnit and provides

some sample ATLAS_800 applications.

Getting Started

• Chapter 2, Installing the ATLAS 800, describes the rear panel layout and how to install the

ATLAS_800.

• Chapter 3, Operating the ATLAS 800, describes the front panel layout and different ways to operate

the ATLAS_800.

Reference Information

• Chapter 4, Using the Front Panel, describes how to use the front panel. This chapter also describes

each menu option that is accessible through the front panel.

• Chapter 5, Navigating the Terminal Menu, describes how to navigate the terminal menu.

• Chapter 6, Terminal Menu and System Control, describes the terminal menus used for system control.

• Chapter 7, Modules Terminal Menu, describes the terminal menus used for module and T1/PRI port

control.

• Chapter 8, Dedicated Maps Terminal Menu, describes the terminal menus used for Dedicated Maps

and provides some examples.

• Chapter 9, Dial Plan Terminal Menu, describes the terminal menus used for Dial Plans and provides

some examples.

Working with the ATLAS_800

• Chapter 10, UpdatingFirmware, provides step-by-step instruction on howto update the ATLAS_800

firmware.

• Chapter 11, SNMP Management, describes how to control the ATLAS_800 via SNMP.

• Chapter 12, ADTRAN Utilities, describes the SysLog, Telnet, VT-100,and TFTP Server programsde-

livered with the ATLAS_800.

Appendices

• Appendix A, System Event Logging, describes the events monitored by the ATLAS_800.

• Appendix B, Troubleshooting, describes how to diagnose different problems you may experience.

• Appendix C, Warranty and Technical Support Information, describes your warranty and how to con-

tact technical support.

• Appendix D, Acronyms and Abbreviations, lists acronyms and abbreviations used for the ATLAS 800

and its option modules.

• Appendix E, Glossary, defines terms used with ATLAS 800 and its option modules.

Andere Handbücher für ATLAS 800 Series Module QUAD E1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ADTRAN Netzwerk-Hardware Handbücher

ADTRAN

ADTRAN Dual Nx56/64 Bedienungsanleitung

ADTRAN

ADTRAN Total Access 832 Bedienungsanleitung

ADTRAN

ADTRAN TA 900 Bedienungsanleitung

ADTRAN

ADTRAN NetVanta Serial Dial Backup Interface Module (DIM)... Bedienungsanleitung

ADTRAN

ADTRAN T200 HTU-R Bedienungsanleitung

ADTRAN

ADTRAN FXS+ Dual Bedienungsanleitung

ADTRAN

ADTRAN jobAid 1442351G1 Bedienungsanleitung

ADTRAN

ADTRAN jobAid Bedienungsanleitung

ADTRAN

ADTRAN NetVanta T1/FT1 + DSX-1 Bedienungsanleitung

ADTRAN

ADTRAN GPON TA352 Bedienungsanleitung

ADTRAN

ADTRAN Total Access 334 Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 8044M Bedienungsanleitung

ADTRAN

ADTRAN Fractional T1 Tandem Channel Unit FT1-TDM Bedienungsanleitung

ADTRAN

ADTRAN Network Interface Module T1/FT1 Bedienungsanleitung

ADTRAN

ADTRAN eSBC Bedienungsanleitung

ADTRAN

ADTRAN 1203019L2 Bedienungsanleitung

ADTRAN

ADTRAN Total Access 1500 Total Reach DDS-DP Produkthandbuch

ADTRAN

ADTRAN XFP Bedienungsanleitung

ADTRAN

ADTRAN ACT 1900 Bedienungsanleitung

ADTRAN

ADTRAN ISU 512E Bedienungsanleitung

ADTRAN

ADTRAN ISU 2X64 Bedienungsanleitung

ADTRAN

ADTRAN SFP Series Bedienungsanleitung

ADTRAN

ADTRAN DDM+ H2TU-C Bedienungsanleitung

ADTRAN

ADTRAN 12804108L1A Benutzerhandbuch

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung