ADTRAN NetVanta 8044M Bedienungsanleitung

NETVANTA SERIAL NETWORK INTERFACE MODULE (NIM) P/N 1200866L1

For more detailed documentation, visit us online at www.adtran.com

Quick Start Guide

SPECIFICATIONS

Serial

Interface

Provides V.35 or X.21 (V.11) electrical

interface

Connector: 26-Pin Smart Serial (DTE)

Operating

Mode

DTE Only

INSTALLATION INSTRUCTIONS

1. Remove the power from the unit.

2. Slide the Network Interface Module (NIM) into the option

slot until the NIM is firmly seated against the back of the

chassis.

3. Secure the pins at both edges of the NIM.

4. Connect the cables to the associated device(s).

5. Complete installation of the base unit.

6. Restore power to the unit.

An optional Dial Backup Interface Module (DIM) is

required for dial backup applications.

SERIAL DBU

SERIAL NETWORK CONNECTION PINOUT

Pin Name Pin Name

1TD_A 14 TD_B

2 ETC_A 15 ETC_B

3TCLK_A 16 TCLK_B

4RCLK_A17 RCLK_B

5 RD_A 18 RD_B

6 DCD_A 19 Unused

7 DTR_A 20 Unused

8 RTS_A 21 Unused

9 RTS_B (V.11 only) 22 Unused

10 CTS_B (V.11 only) 23 Unused

11 CTS_A 24 Unused

12 DSR_A 25 Unused

13 TM_A 26 Ground

DBU (RJ-48C) CONNECTION PINOUT

Pin Name Description

1-2 — Unused

3 R1 Network-Ring1

4 R Network-Ring

5 T Network-Tip

6 T1 Network-Tip1

7-8 — Unused

NETVANTA SERIAL NETWORK INTERFACE MODULE (NIM) P/N 1200866L1

For more detailed documentation, visit us online at www.adtran.com

Quick Start Guide

SERIAL NIM COMMANDS

description <text>

Comment line to provide an identifier for this interface (for example, circuit ID, contact

information, etc).

<text> Up to 80 alphanumeric characters

et-clock-source {rxclock | txclock* }

Configures the clock source used when creating the external transmit (reference

clock).

rxclock Uses the clock recovered from the receive signal to generate

external transmit clock.

txclock*Uses the clock recovered from the transmit signal to generate

external transmit clock.

ignore dcd

Defines the behavior of the serial interface when the data carrier detect (DCD) signal is

lost.

When configured to follow DCD (default condition), the serial interface will not attempt

to establish a connection when DCD is not present. When configured to ignore DCD,

the serial interface will continue to attempt to establish a connection even when DCD is

not present.

invert etclock

Configures the serial NIM to invert the external transmit (reference clock) in the data

stream before transmitting.

invert rxclock

Configures the serial interface to expect an inverted receive clock in the received data

stream.

invert txclock

Configures the serial interface to invert the transmit clock found in the transmitted data

stream.

serial mode {V35*| X21}

Configures the electrical mode for the interface. Both modes require the use of the

appropriate cable: V.35 (1200873L1) or X.21 (1200874L1).

shutdown

Turns off the interface. The no version of this command turns the interface on and allows

it to pass data.

snmp trap

Enables all supported Simple Network Management Protocol (SNMP) traps on the

interface.

snmp trap link-status

Controls the SNMP variable to enable (or disable) the interface to send SNMP traps

when there is an interface status change.

* Indicates default values.

Andere Handbücher für NetVanta 8044M

Inhaltsverzeichnis

Andere ADTRAN Netzwerk-Hardware Handbücher

ADTRAN

ADTRAN Total Access 3000 Benutzerhandbuch

ADTRAN

ADTRAN DSU IV ESP Bedienungsanleitung

ADTRAN

ADTRAN NxT1 HSSI/V-35 Bedienungsanleitung

ADTRAN

ADTRAN Fractional T1 Tandem Channel Unit FT1-TDM Bedienungsanleitung

ADTRAN

ADTRAN 1442704PG1 Bedienungsanleitung

ADTRAN

ADTRAN NETVANTA 6355 Bedienungsanleitung

ADTRAN

ADTRAN XFP Bedienungsanleitung

ADTRAN

ADTRAN DSX 1 Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 6355 PoE Bedienungsanleitung

ADTRAN

ADTRAN ESU LT Bedienungsanleitung

ADTRAN

ADTRAN Dual Nx56/64 Bedienungsanleitung

ADTRAN

ADTRAN 1442351G7 Bedienungsanleitung

ADTRAN

ADTRAN SFP+ Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 6330 Series Bedienungsanleitung

ADTRAN

ADTRAN Total Access 1100F Bedienungsanleitung

ADTRAN

ADTRAN HTU-C Bedienungsanleitung

ADTRAN

ADTRAN DSU III ARdc Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 1760-12F Bedienungsanleitung

ADTRAN

ADTRAN TSU LT Bedienungsanleitung

ADTRAN

ADTRAN TR OCU DP Bedienungsanleitung

ADTRAN

ADTRAN ATLAS 800 Series Module QUAD E1 Bedienungsanleitung

ADTRAN

ADTRAN QFO-C Bedienungsanleitung

ADTRAN

ADTRAN HDSL 3192 HTU-C Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 1224 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung