ADTRAN NetVanta Serial Dial Backup Interface Module (DIM)... Bedienungsanleitung

NetVanta Serial Dial Backup Interface Module (DIM) P/N 1200886L1

For more detailed documentation, visit us online at www.adtran.com.

Quick Start Guide

SPECIFICATIONS

Features 5-pin RS-232 interface via host RJ-45 DBU connector

Modem flow control support via CTS

Communication with external modem via AT commands

Compliance FCC Part 15 Class A, EN 55022 Class A, EN 55024

EN 61000-3-2, EN 61000-3-3

IEC 60950, EN 60950, UL/CUL 60950, AS/NZS 60950

Physical Dimensions: 2.3-inch W x 2.75-inch D

Operating Temperature: 0°C to 50°C

Storage Temperature: -20°C to 70°C

Relative Humidity: Up to 95 percent, noncondensing

An RJ-45 to DB-9 adapter cable (P/N 1200887L1) is

required to connect to the external modem.

NetVanta modules should be installed only in

NetVanta Series products.

CONSOLE

LAN

SLOT 1 NET/D BU

WAN-DDS DBU

WAN-T1 DSX-1 DBU

SERIAL DBU CONNECTION PINOUTS

INSTALLATION INSTRUCTIONS

1. Remove power from the base unit.

2. If the Network Interface Module (NIM) is already in the NetVanta

chassis, release the pins at both edges of the NIM faceplate and slide

the module out of the chassis.

3. Carefully align the P1 connector on the NIM with the J1 connector on

the Serial DIM. Using only fingertip pressure so that neither circuit

board bends or flexes, ensure that the connectors are firmly seated.

Secure the Serial DIM to the NIM using the screws and standoff posts

supplied.

4. Slide the NIM with the Serial DIM attached into the NetVanta option

slot until the NIM is firmly seated against the chassis.

5. Secure the pins at both edges of the NIM.

6. Connect the cables to the associated device(s)

7. Complete installation of the base unit.

For NetVanta modules with outside plant

connections, ensure that all cables are

removed from the module before installing or

removing it from the NetVanta chassis.

Pin Name

1, 2 Unused

3CTS

4TXD

5RXD

6GND

7 DCD

8 Unused

Important: For additional details on product

features, specifications, installation, and safety, refer

to the appropriate Hardware Installation Guide on

the ADTRAN OS System Documentation CD

shipped with the base unit and available online at

www.adtran.com.

NetVanta Serial Dial Backup Interface Module (DIM) P/N 1200886L1

For more detailed documentation, visit us online at www.adtran.com.

Quick Start Guide

SERIAL DIM COMMANDS

alias <“text”>

Populates the ifAlias OID (Interface Table MIB of RFC2863) for all physical

and virtual interfaces when using SNMP management station.

caller-id override [always <number> | if-no-CID <number>]

Configures the unit to replace caller ID information with a user-specified

number. Use the no form of this command to disable any caller ID overrides.

always <number> Always forces replacement of the incoming

caller ID number with the number given.

if-no-CID <number> Replaces the incoming caller ID number with

the number given only if there is no caller ID

information available for the incoming call.

description <text>

Identifies the specified interface, both physical and virtual (for example,

circuit ID, contact information, etc.), using up to 80 alphanumeric characters.

dialin

Enables the modem for remote console dial-in, disabling the use of the

modem for dial-backup.

init-string <string>

Specifies an initialization string using standard AT commands. Use the no

form of this command to return to the default initialization string.

<string> Specifies an initialization string using standard

AT commands. This string must start with AT

and cannot contain spaces. The default string

is ate0q0v1x4\n0.

shutdown

Disables the interface (both physical and virtual) so that no data will be

passed through. Use the no version of this command to turn on the interface

and allow it to pass data.

Dieses Handbuch passt für folgende Modelle

Andere ADTRAN Netzwerk-Hardware Handbücher

ADTRAN

ADTRAN Total Access 362R Produkthandbuch

ADTRAN

ADTRAN DS3 NIU3 Bedienungsanleitung

ADTRAN

ADTRAN HDSL4 Bedienungsanleitung

ADTRAN

ADTRAN TSU 100 Bedienungsanleitung

ADTRAN

ADTRAN 4202023L1 Bedienungsanleitung

ADTRAN

ADTRAN NETVANTA 6355 Bedienungsanleitung

ADTRAN

ADTRAN 1442940G1 Bedienungsanleitung

ADTRAN

ADTRAN Total Access 351 Bedienungsanleitung

ADTRAN

ADTRAN DDM+ H2TU-C Bedienungsanleitung

ADTRAN

ADTRAN Express 3000 Bedienungsanleitung

ADTRAN

ADTRAN NIU3 Bedienungsanleitung

ADTRAN

ADTRAN 500 Series Bedienungsanleitung

ADTRAN

ADTRAN 1200221L1 Bedienungsanleitung

ADTRAN

ADTRAN OSU 300 Bedienungsanleitung

ADTRAN

ADTRAN ENHANCED PSD 239 H2R Bedienungsanleitung

ADTRAN

ADTRAN 1442704PG1 Bedienungsanleitung

ADTRAN

ADTRAN DUAL Nx56/64 1200142L1# Bedienungsanleitung

ADTRAN

ADTRAN Total Reach TRDDB Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 1700801G1 Bedienungsanleitung

ADTRAN

ADTRAN Total Access 900E Series Bedienungsanleitung

ADTRAN

ADTRAN HD-10 BRI MUX Bedienungsanleitung

ADTRAN

ADTRAN DS3 NIU3 Bedienungsanleitung

ADTRAN

ADTRAN IQ Probe 1200214L1 Bedienungsanleitung

ADTRAN

ADTRAN NetVantaE1/FE1 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung