ADURO Hybrid Merkblatt

Problem solving. Door switch defect / no contact

Question: How do I fix the problem when the Aduro Hybrid app reports "The door is open" and the pellet

function will not turn on?

Reason: When you receive the alarm message "The door is open" and the oven either turns itself off or it

will not turn on, because the door of the combustion chamber is open, it may be due to 2 things:

1) The door sensor/switch is defect. You can check this by holding down your finger for a few seconds.

If the alarm message on the app disappears, the door switch is not defect and works fine.

2) There is a lack of contact between the door hook and the door switch. If there is no touch between

the hook that is located at the bottom of the door to chamber and the switch that is hidden in the

right side of the oven (see pictures below).

The old solution a hook in the corner below location of the old door switch hidden on the right side.

Solution: Adjust the door so that the hook enters and presses the plug of the switch when the door of the

combustion chamber is closed. Alternatively, install a new door hook, a new bracket and a new door switch

with long arm that is attached on the bracket. The new hook takes over the function role of the old door

hook and a new bracket with the new door switch, which will replace the old door contact.

First step:

First remove the old door switch that is located on the stoves right side. You can screw the plate that is

located on the right side off (see picture below) to get to the switch and then unscrew the two screws

shown in the picture below.

Second step:

When the old door switch is removed, the new solution must be installed. Use the existing screw that is

located at the bottom of the door and mount the new hook. The picture below shows how the new hook

looks and should sit.

Use the screw that is located lower part of door Install a new hook on the screw that is already on the door

Third step:

Use the screw that holds the dark heating shield in place. Remove the screw and install new fitting/bearing

with the new doorswitch. This helps ensure that there is always a touch between hook and the new switch.

Here is the heat shield that is held in place by the screw The new bracket is mounted on the screw with new switch

Fourth step:

Plug in the two red wires to the new switch. We illustrate below how they should be plugged in. Once

installed correctly, this will act as the new door sensor and determine whether the door of the combustion

chamber is open or closed. If done correctly alarm message on App should dissapear. If it dosent work try

plug the cables in in different place.

Inhaltsverzeichnis

Andere ADURO Herd Handbücher

ADURO

ADURO 9-3 Lux Bedienungsanleitung

ADURO

ADURO P1 series Konfigurationshandbuch

ADURO

ADURO 9-5 Lux Bedienungsanleitung

ADURO

ADURO 1-1 Limestone Bedienungsanleitung

ADURO

ADURO Hybrid Bedienungsanleitung

ADURO

ADURO Hybrid Leitfaden

ADURO

ADURO H1 Bedienungsanleitung

ADURO

ADURO Hybrid Installationsanleitung

ADURO

ADURO 9 air Bedienungsanleitung

ADURO

ADURO P1 series Bedienungsanleitung

ADURO

ADURO H1 LUX Bedienungsanleitung

ADURO

ADURO ASGARD 7F Bedienungsanleitung

ADURO

ADURO H5 Bedienungsanleitung

ADURO

ADURO B1 Bedienungsanleitung

ADURO

ADURO H2 Bedienungsanleitung

ADURO

ADURO P5 Series Bedienungsanleitung

ADURO

ADURO P1 series Bedienungsanleitung

ADURO

ADURO 15SK Limestone Bedienungsanleitung

ADURO

ADURO P5 Series Bedienungsanleitung

ADURO

ADURO 15-4 Bedienungsanleitung

ADURO

ADURO 9-5 Bedienungsanleitung

ADURO

ADURO Hybrid Bedienungsanleitung

ADURO

ADURO Hybrid Bedienungsanleitung

ADURO

ADURO Asgard 9-1 Bedienungsanleitung

Beliebte Herd Handbücher anderer Marken

Arada

Arada Cassette Stove Bedienungsanleitung

HearthStone

HearthStone Stowe DV 8321 Fehlerbehebungshandbuch

Cattara

Cattara FAMILY Bedienungsanleitung

Stanley

Stanley Argon F500 OVAL Bedienungsanleitung

Avalon

Avalon B-VENT Bedienungsanleitung

Nordpeis

Nordpeis Vega Bedienungsanleitung

Exquisit

Exquisit EKC601-5 Bedienungsanleitung

Stanley

Stanley Oisin Oil MK II Betriebsanleitung

Thermocet

Thermocet Brookfield S/CC Bedienungsanleitung

HASE

HASE delhi Bedienungsanleitung

Vermont Castings

Vermont Castings Intrepid 2 Bedienungsanleitung

Italiana Camini

Italiana Camini CLASSICA Kurzanleitung

Avalon

Avalon Vashon Avanti DVS FS Bedienungsanleitung

Spartherm

Spartherm ambiente a1 Bedienungsanleitung

Dimplex

Dimplex MCFSTV12AU Bedienungsanleitung

Warmlite

Warmlite WL46040 Bedienungsanleitung

Regency

Regency Ultimate U39E Series Kurzanleitung

Barton

Barton FH-AMP8745 Technisches Dokument