Advantech PCA-6180 Series Bedienungsanleitung

PCA-6180

Full-size socket 370 Intel®

Pentium® III / Celeron®

processor based

PCI/ISA-bus CPU card

This document is copyrighted, 2000, by Advantech Co., Ltd. All

rights are reserved. Advantech Co., Ltd. reserves the right to make

improvements to the products described in this manual at any time

without notice.

No part of this manual may be reproduced, copied, translated or

transmitted in any form or by any means without the prior written

permission of Advantech Co., Ltd. Information provided in this

manual is intended to be accurate and reliable. However, Advantech

Co., Ltd. assumes no responsibility for its use, nor for any in-

fringements upon the rights of third parties which may result from its

use.

Acknowledgements

• AWARD is a trademark of AWARD Software, Inc.

• IBM and PC are trademarks of International Business Machines

Corporation.

• Intel®, Pentium®III, and Celeron®are trademarks of Intel Corpora-

tion.

• MS-DOS is a trademark of Microsoft Corporation.

• SMC is a trademark of Standard Microsystems Corporation.

• WinBond is a trademark of Winbond Corporation.

• Adaptec is a registered trademark of Adaptec, Inc.

All other product names or trademarks are the properties of their

respective owners.

Part No. 2006618000

1st Edition Printed in Taiwan Dec. 2000

A Message to the Customer

Advantech customer services

Each and every Advantech product is built to the most exacting

specifications to ensure reliable performance in the harsh and

demanding conditions typical of industrial environments. Whether

your new Advantech equipment is destined for the laboratory or the

factory floor, you can be assured that your product will provide the

reliability and ease of operation for which the name Advantech has

come to be known.

Your satisfaction is our primary concern. Here is a guide to

Advantech’s customer services. To ensure you get the full benefit of

our services, please follow the instructions below carefully.

Technical support

We want you to get the maximum performance from your products.

So if you run into technical difficulties, we are here to help. For the

most frequently asked questions, you can easily find answers in your

product documentation. These answers are normally a lot more

detailed than the ones we can give over the phone.

So please consult this manual first. If you still cannot find the answer,

gather all the information or questions that apply to your problem,

and with the product close at hand, call your dealer. Our dealers are

well trained and ready to give you the support you need to get the

most from your Advantech products. In fact, most problems reported

are minor and are able to be easily solved over the phone.

In addition, free technical support is available from Advantech

engineers every business day. We are always ready to give advice on

application requirements or specific information on the installation

and operation of any of our products.

PCA-6180 Series comparison table

Model PCA-6180E PCA-6180E2 PCA-6180SE PCA-6180F

CPU: IntelﬁPentiumﬁIII /

Celeronﬁsocket 370 V

V V

System chipset: Intelﬁ 815E V

V V

BIOS: Award P&P BIOS V

V V

Max. system RAM: 512MB V

V V

ISA High Drive V

V V

4 USB Ports

2 EIDE connectors V

V V

2 serial, 1 parallel ports V

V V

Chipset integrated VGA

(AGP) V

V V

LAN: 10/100Base-T Ethernet SINGLE DUAL SINGLE DUAL

SCSI: 32-bit PCI Ultra 160 SCSI

(Adaptec AIC-7892 chipset) ------

------------

------ ------

------------

------ V

V V

Product warranty

Advantech warrants to you, the original purchaser, that each of its

products will be free from defects in materials and workmanship for

two years from the date of purchase.

This warranty does not apply to any products which have been

repaired or altered by persons other than repair personnel authorized

by Advantech, or which have been subject to misuse, abuse, accident

or improper installation. Advantech assumes no liability under the

terms of this warranty as a consequence of such events.

If an Advantech product is defective, it will be repaired or replaced at

no charge during the warranty period. For out-of-warranty repairs,

you will be billed according to the cost of replacement materials,

service time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For

example, type of PC, CPU speed, Advantech products used, other

hardware and software used, etc.) Note anything abnormal and list

any on-screen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your

manual, product, and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return

material authorization) number from your dealer. This allows us

to process your return more quickly.

4. Carefully pack the defective product, a fully-completed Repair

and Replacement Order Card and a photocopy proof of purchase

date (such as your sales receipt) in a shippable container. A

product returned without proof of the purchase date is not eligible

for warranty service.

5. Write the RMA number visibly on the outside of the package and

ship it prepaid to your dealer.

Initial Inspection

Before you begin installing your card, please make sure that the

following materials have been shipped:

• 1 PCA-6180 socket 370 Pentium®III / Celeron®processor-based

single board computer

• 1 PCA-6180 Startup Manual

• 1 CD with driver utility and manual (in PDF format)

• 2 SCSI driver disks (optional)

• 1 FDD cable

• 2 Ultra ATA 100 HDD cables, P/N: 1701400452

• 1 printer (parallel port) cable & COM port cable kit, P/N:

1700060305

• 1 ATX-to-PS/2 power cable, P/N: 1700000450

• 1 ivory cable for PS/2 keyboard and PS/2 mouse, P/N:

1700060202

• 1 single-slot bracket, P/N: 1962159010

• 1 USB cable adapter (optional), P/N: 1700100170

If any of these items are missing or damaged, contact your distributor

or sales representative immediately.

We have carefully inspected the PCA-6180 mechanically and

electrically before shipment. It should be free of marks and scratches

and in perfect working order upon receipt.

As you unpack the PCA-6180, check it for signs of shipping damage.

(For example, damaged box, scratches, dents, etc.) If it is damaged or

it fails to meet the specifications, notify our service department or

your local sales representative immediately. Also notify the carrier.

Retain the shipping carton and packing material for inspection by the

carrier. After inspection, we will make arrangements to repair or

replace the unit.

Contents

Chapter 1 Hardware Configuration ............................... 1

1.1 Introduction ........................................................................2

1.2 Features ...............................................................................3

1.3 Specifications ......................................................................5

1.3.1 System .........................................................................5

1.3.2 Memory .......................................................................5

1.3.3 Input/Output ................................................................ 5

1.3.4 VGA interface ..............................................................6

1.3.5 SCSI interface..............................................................6

1.3.6 Ethernet LAN ..............................................................6

1.3.7 Industrial features ........................................................6

1.3.8 Mechanical and environmental specifications .............. 6

1.4 Board Layout: Main Features ........................................... 8

1.5 Jumpers and Connectors ................................................... 9

1.6 Location of Jumpers and Connectors ............................12

1.7 Safety Precautions ............................................................ 13

1.8 Jumper Settings ................................................................ 14

1.8.1 How to set the jumpers .............................................. 14

1.8.2 CMOS clear (J1) ........................................................ 14

1.8.3 Watchdog timer output (J2) ....................................... 15

1.9 System Memory ................................................................16

1.9.1 Sample calculation: DIMM memory capacity ............16

1.9.2 Supplementary information about DIMMs ................ 17

1.10 Memory Installation Procedures ..................................... 18

1.11 Cache Memory .................................................................. 18

1.12 CPU Installation ............................................................... 19

Chapter 2 Connecting Peripherals .............................. 21

2.1 Introduction ......................................................................22

2.2 Primary (CN1) and Secondary (CN2) IDE Connectors . 22

2.3 Floppy Drive Connector (CN3) ....................................... 23

2.4 Parallel Port (CN4) ...........................................................23

2.5 SCSI Connector (CN5) ..................................................... 24

2.6 USB Ports (CN31 and CN32)........................................... 25

2.7 VGA Connector (CN7) ..................................................... 25

2.8 10/100Base-T Ethernet Connectors (CN8 and CN34) .... 26

2.9 Serial Ports (CN9: COM1; CN10: COM2) ..................... 26

2.10 PS/2 Keyboard and Mouse Connectors (CN11 and

CN33) ................................................................................. 28

2.11 External Keyboard Connector (CN12) ...........................28

2.12 Infrared (IR) Connector (CN13) ..................................... 29

2.13 CPU Fan Connector (CN14) ............................................ 29

2.14 Front Panel Connectors (CN16, CN17, CN18, CN19,

CN21 and CN22) ............................................................... 30

2.14.1 Keyboard lock and power LED (CN16) .................. 30

2.14.2 External speaker (CN17) ......................................... 30

2.14.3 Reset (CN18) ...........................................................30

2.14.4 HDD LED (CN19) .................................................. 31

2.14.5 ATX soft power switch (CN21) ............................... 31

2.15 ATX Power Control Connectors (CN20 and CN21) ...... 31

2.15.1 ATX feature connector (CN20) and soft power

switch connector (CN21) .................................................... 31

2.15.2 Controlling the soft power switch ............................32

2.16 SM Bus Connector (CN23) .............................................. 32

Chapter 3 Award BIOS Setup....................................... 33

3.1 Introduction ......................................................................34

3.2 Entering Setup ...................................................................34

3.3 Standard CMOS Setup ..................................................... 35

3.3.1 CMOS RAM backup ................................................. 35

3.4 Advanced BIOS Features ................................................. 36

3.4.1 Virus Warning ............................................................ 36

3.4.2 CPU Internal Cache / External Cache........................ 36

3.4.3 CPU L2 Cache ECC Checking ..................................37

3.4.4 Quick Power On Self Test .........................................37

3.4.5 First/Second/Third/Other Boot Device ...................... 37

3.4.6 Swap Floppy Drive ....................................................37

3.4.7 Boot UP Floppy Seek ................................................ 37

3.4.8 Boot Up NumLock .................................................... 37

3.4.9 Gate A20 Option ........................................................ 38

3.4.10 Typematic Rate Setting ............................................38

3.4.11 Typematic Rate (Chars/Sec) .................................... 38

3.4.12 Typematic Delay (msec) .......................................... 38

3.4.13 Security Option ........................................................38

3.4.14 OS Select for DRAM > 64MB ................................ 39

3.4.15 Report No FDD For Win 95 .................................... 39

3.5 Advanced Chipset Features ..............................................39

3.5.1 SDRAM CAS Latency Time ..................................... 40

3.5.2 SDRAM Cycle Time Tras/Trc ...................................40

3.5.3 SDRAM RAS-to-CAS Delay ..................................... 40

3.5.4 SDRAM RAS Precharge Time .................................. 40

3.5.5 System BIOS Cacheable ............................................41

3.5.6 Video Bios Cacheable ................................................ 41

3.5.7 Memory Hole At 15M-16M ...................................... 41

3.5.8 CPU Latency Timer ..................................................41

3.5.9 Delayed Transaction .................................................. 41

3.5.10 AGP Graphics Aperture Size (MB) ......................... 41

3.5.11 On-Chip Video Window Size ...................................42

3.6 Integrated Peripherals ...................................................... 42

3.6.1 On-Chip Primary/Secondary PCI IDE ...................... 42

3.6.2 IDE Primary Master/Slave PIO/UDMA Mode,

IDE Secondary Master/Slave PIO/UDMA Mode (Auto) .... 42

3.6.3 USB Controller .......................................................... 43

3.6.4 USB Keyboard Support ............................................. 43

3.6.5 Init Display First ........................................................ 43

3.6.6 IDE HDD Block Mode ..............................................43

3.6.7 Onboard FDC Controller ........................................... 43

3.6.8 Onboard Serial Port 1 (3F8H/IRQ4)..........................43

3.6.9 Onboard Serial Port 2 (2F8H/IRQ3)..........................43

3.6.10 UART Mode Select .................................................44

3.6.11 RxD, TxD Active ..................................................... 44

3.6.12 IR Transmission Delay.............................................44

3.6.13 UR2 Duplex Mode ................................................... 44

3.6.14 Use IR Pins..............................................................45

3.6.15 Onboard Parallel Port (378H/IRQ7) ........................45

3.6.16 Parallel Port Mode (ECP + EPP) ............................45

3.6.17 EPP Mode Select ..................................................... 45

3.6.18 ECP Mode Use DMA .............................................. 45

3.7 Power Management Setup ...............................................46

3.7.1 Power Management ...................................................46

3.7.2 HDD Power Down .................................................... 46

3.7.3 Soft-Off by PWR-BTTN ..........................................46

3.7.4 PowerOn By LAN ..................................................... 47

3.7.5 PowerOn By Modem ................................................ 47

3.7.6 PowerOn By Alarm ...................................................47

3.7.8 CPU Thermal-Throttling ........................................... 47

3.8 PnP/PCI Configurations .................................................. 47

3.8.1 Resources controlled by: ............................................47

3.8.2 PnP OS Installed ....................................................... 47

3.8.3 Reset Configuration Data ........................................... 48

3.8.4 PCI/VGA Palette Snoop ............................................ 48

3.9 PC Health Status .............................................................. 48

3.9.1 CPU Warning Temperature ....................................... 48

3.9.2 Current System Temp. ..............................................48

3.9.3 Current CPU Temperature ........................................ 49

3.9.4 Current CPUFAN Speed ........................................... 49

3.9.5 +5V/+12V/-12V/-5V .................................................. 49

3.9.6 Shutdown Temperature ............................................. 49

3.10 Load Setup Defaults .........................................................50

3.11 Password Setting ............................................................... 50

3.12 Save & Exit Setup ............................................................. 51

3.13 Exit Without Saving ......................................................... 51

Chapter 4 Chipset Software Installation (CSI) Utility. 53

4.1 Before You Begin .............................................................. 54

4.2 Introduction ......................................................................54

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Advantech Computerhardware Handbücher

Advantech

Advantech ECU-P1628D Installations- und Betriebshandbuch

Advantech

Advantech PCM-3350 Series Bedienungsanleitung

Advantech

Advantech SOM-5991 Bedienungsanleitung

Advantech

Advantech MIO-5376 Bedienungsanleitung

Advantech

Advantech AIMB-707 Installations- und Betriebshandbuch

Advantech

Advantech LGA 1700 Bedienungsanleitung

Advantech

Advantech EPC-R6410 Bedienungsanleitung

Advantech

Advantech MIC-730AI Bedienungsanleitung

Advantech

Advantech MIO-5270 Installations- und Betriebshandbuch

Advantech

Advantech MIC-3393 Bedienungsanleitung

Advantech

Advantech FWA-6510 Installations- und Betriebshandbuch

Advantech

Advantech HPC-7420 Bedienungsanleitung

Advantech

Advantech UNO-238 V2 Installations- und Betriebshandbuch

Advantech

Advantech MIO-4370 Bedienungsanleitung

Advantech

Advantech MIC-7420 Installations- und Betriebshandbuch

Advantech

Advantech SOM-5883 Bedienungsanleitung

Advantech

Advantech MIC-710AIL Bedienungsanleitung

Advantech

Advantech SOM-5786 Bedienungsanleitung

Advantech

Advantech ASMB-H90 Installations- und Betriebshandbuch

Advantech

Advantech UNO-2172 Bedienungsanleitung

Advantech

Advantech PCL-818L Bedienungsanleitung

Advantech

Advantech UNO-2484G Bedienungsanleitung

Advantech

Advantech PCL-848A/B Bedienungsanleitung

Advantech

Advantech MIC-75M20 Installations- und Betriebshandbuch

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung