Advantech ADAM-5510 Series Installations- und Betriebshandbuch
Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | sales@artisantg.com | www.artisantg.com
SM
View
Instra
ADAM-5510 Series
PC Based Programmable
Controller
Startup Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
ADAM-5510 Series Startup Manual ii
Table of Contents
1 System Requirements...................................... 1
1.1 Host Computer Requirements ..................................... 1
1.2 ADAM-5510 Series Requirements ............................. 1
1.3 I/O Module Requirements........................................... 2
2 Hardware Installation..................................... 3
2.1 Power Wiring .............................................................. 3
2.2 Programming Port Wiring........................................... 4
2.3 Jumper Settings ........................................................... 5
3 I/O Module Configuration.............................. 6
3.1 Install ADAM-5510 Series Utility .............................. 6
3.2 Config. I/O Modules by ADAM-5510 Series Utility.. 7
4 Application Execution at Bootup................. 13
Part No. 2003551010 1st Edition
Printed in Taiwan August 2004
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
1 ADAM-5510 Series Startup Manual
1 System Requirements
1.1 Host Computer Requirements
• IBM PC compatible computer with 486 CPU (Pentium is recom-
mended).
• Microsoft Windows 95/98/NT4.0 SP4/2000 or higher versions.
• Borland C++ 3.0 for DOS
• At least 32 MB RAM.
• 20 MB of hard disk space available
• VGA color monitor.
• CD-ROM.
• Mouse or other pointing devices.
• At least one standard RS-232 port (e.g. COM1, COM2).
1.2 ADAM-5510 Series Requirements
• One ADAM-5510 Series main unit, i.e., ADAM-5510M, ADAM-
5510E, ADAM-5510/TCP or ADAM-5510E/TCP.
• One ADAM-5510 Series Startup Manual
• One core clamp for power supply connection.
• One ADAM Products Utilities CD.
• Power supply for ADAM-5510 Series (+10 to +30 VDC unregulated)
• One RS-232 straight through DB-9 cable
• One null modem adaptor or cable with DB-9 connectors
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
1.3 I/O Module Requirements
At least one I/O module is needed to use the system. A variety of I/O
modules are available to meet different application requirements. Table
1.1 gives a current listing of these modules for your reference.
Table 1.1: I/O Module Support List
Module Name Specification Reference
ADAM-5013 3-ch. RTD input Isolated
ADAM-5017 8-ch. AI Isolated
ADAM-5017H 8-ch. High speed AI Isolated
ADAM-5018 7-ch. Thermocouple input Isolated
Analog I/O
ADAM-5024 4-ch. AO Isolated
ADAM-5050 7-ch. D I/O Non-isolated
ADAM-5051 16-ch. DI Non-isolated
ADAM-5051D 16-ch. DI w/LED Non-isolated
ADAM-5051S 16-ch. Isolated DI w/LED Isolated
ADAM-5052 8-ch. DI Isolated
ADAM-5055S 16-ch. Isolated DI/O w/LED Isolated
ADAM-5056 16-ch. DO Non-isolated
ADAM-5056D 16-ch. DO w/LED Non-isolated
ADAM-5056S 16-ch. Isolated DO w/LED Isolated
Digital I/O
ADAM-5056SO 16-ch. Iso. DO w/LED (source) Isolated
ADAM-5060 6-ch. Relay output Isolated
ADAM-5068 8-ch. Relay output Isolated
Relay Output
ADAM-5069 8-ch. Power Relay output Isolated
Counter/Frequen
c
ADAM-5080 4-ch. Counter/Frequency Isolated
Serial I/O ADAM-5090 4-port RS232 Non-isolated
ADAM-5510 Series Startup Manual 2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
3 ADAM-5510 Series Startup Manual
2 Hardware Installation
2.1 Power Wiring
Power Supply +
+10~+30 Vdc -
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
ADAM-5510 Series Startup Manual 4
2.2 Programming Port Wiring
CD
RX
TX
DTR
GND
DSR
RTS
CTS
RI
1
2
3
4
5
6
7
8
9
N/A
TX
RX
N/A
GND
N/A
N/A
N/A
N/A
1
2
3
4
5
6
7
8
9
PC
Straight Through Cable
RS-232
COM3
(Prog. Port)
PC COM Port Straight Through Cable ADAM-5510 Series COM3
Analog Input
Analog Output
Digital Input
Digital Output
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
5 ADAM-5510 Series Startup Manual
2.3 Jumper Settings
DIP Switch of ID Address:
ID Address = Value of (SW1+SW2+SW3+SW4+SW5)
COM Port Selection for Configuration Tool:
SW7 and SW8 are reserved for future use.
DIP SW1 SW2 SW3 SW4 SW5
ON124816
OFF00000
DIP SW6
ON COM1/RS-232
OFF COM2/RS-485
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
ADAM-5510 Series Startup Manual 6
3 I/O Module Configuration
3.1 Install ADAM-5510 Series Utility
1. Insert the ADAM Products CD and setup the ADAM-5510 Series
Utility.
2. After the ADAM-5510 Series Utility has been installed, you will
find two directories under “C:\Program Files\Advantech\” direc-
tory. They are named “ADAM-5510M-5510E Utility” and
“ADAM-5510TCP-5510ETCP”.
If you are using ADAM-5510M or ADAM-5510E, you have to use
the files under the “ADAM-5510M-5510E Utility” directory.
If you are using ADAM-5510/TCP or ADAM-5510E/TCP, you
have to use the files under the “ADAM-5510TCP-5510ETCP Util-
ity” directory.
The directory structure is shown below:.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
7 ADAM-5510 Series Startup Manual
3.2 Configure I/O Modules by ADAM-5510 Series Utility
The following steps will use ADAM-5510/TCP as an example to demon-
strate how to configure the ADAM-5017 Analog Input Module.
1. Please click the “Program” directory under “ADAM-5510TCP-
5510ETCP Utility” and run “ADAM5510.EXE”, which is the
ADAM-5510 Series Utility. You will see the following figure.
2. Click the refresh button to check if the drive D: of ADAM-
5510TCP is detected correctly.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Dieses Handbuch passt für folgende Modelle
4
Inhaltsverzeichnis
Andere Advantech Controller Handbücher
Advantech
Advantech UNO-2160 Bedienungsanleitung
Advantech
Advantech ADAM 5510EKW/TP Installations- und Betriebshandbuch
Advantech
Advantech AIIS-1882 Bedienungsanleitung
Advantech
Advantech WISE-4210-S231 Installations- und Betriebshandbuch
Advantech
Advantech PCL-839+ Bedienungsanleitung
Advantech
Advantech MIC-1816R Installations- und Betriebshandbuch
Advantech
Advantech SKY-4120B Bedienungsanleitung
Advantech
Advantech ADAM-5630 Series Bedienungsanleitung
Advantech
Advantech PCM-26D2CA Installations- und Betriebshandbuch
Advantech
Advantech ADAM-4500 Bedienungsanleitung
Advantech
Advantech UNO-2050 Bedienungsanleitung
Advantech
Advantech UNO-127 Bedienungsanleitung
Advantech
Advantech AMAX-5580 Bedienungsanleitung
Advantech
Advantech UNO-2182 Bedienungsanleitung
Advantech
Advantech GX2-400 Bedienungsanleitung
Advantech
Advantech UNO-2182-D13BE Bedienungsanleitung
Advantech
Advantech B+B SmartWorx Wzzard BB-WSK-NRG-1 Benutzerhandbuch
Advantech
Advantech ADAM-5510/P31 Bedienungsanleitung
Advantech
Advantech ADAM-5550KW Series Bedienungsanleitung
Advantech
Advantech PCI-1760U Installations- und Betriebshandbuch
