Advantech ADAM-5511 Bedienungsanleitung

Introduction

This document is copyrighted, 2000, by Advantech Co., Ltd. All rights

are reserved. Advantech Co., Ltd., reserves the right to make improve-

ments to the products described in this manual at any time without

notice.

No part of this manual may be reproduced, copied, translated or

transmitted in any form or by any means without the prior written

permission of Advantech Co., Ltd. Information provided in this manual

is intended to be accurate and reliable. However, Advantech Co., Ltd.

assumes no responsibility for its use, nor for any infringements upon

the rights of third parties which may result from its use.

Acknowledgments

IBM and PC are trademarks of International Business Machines

Corporation.

PartNo.2000551110 FirstEdition

Printed in Taiwan August 2000

Technical Support

We want you to get the maximum performance from your products. So

if you run into technical difficulties, we are here to help. For most

frequently asked questions you can easily find answers in your

product documentation. These answers are normally a lot more

detailed than the ones we can give over the phone.

So please consult this manual first. If you still cannot find the answer,

gather all the information or questions that apply to your problem and,

with the product close at hand, call your dealer. Our dealers are well

trained and ready to give you the support you need to get the most

from your Advantech products. In fact, most problems reported are

minor and are able to be easily solved over the phone.

In addition, free technical support is available from Advantech

engineers every business day. We are always ready to give advice on

application requirements or specific information on the installation and

operation of any of our products.

Website information:

You can access the most current support on our website:

http://www.advantech.com

Product Warranty

Advantech warrants to you, the original purchaser, that each of its

products will be free from defects in materials and workmanship for

two year from the date of purchase.

This warranty does not apply to any product which have been

repaired or altered by other than repair personnel authorized by

Advantech, or which have been subject to misuse, abuse, accident or

improper installation. Advantech assumes no liability as a conse-

quence of such events under the terms of this Warranty.

Because of Advantech’s high quality-control standards and rigorous

testing, most of our customers never need to use our repair service. If

an Advantech product ever does prove defective, it will be repaired or

replaced at no charge during the warranty period. For out-of-warranty

repairs, you will be billed according to the cost of replacement materi-

als, service time and freight. Please consult your dealer for more

details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered (e.g. type

of PC, CPU speed, Advantech products used, other hardware and

software used etc.). Note anything abnormal and list any on-screen

messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your

manual, product, and any helpful information readily available.

3. If your product is diagnosed as defective, you have to request an

RAM number. When requesting an RMA (Return Material Authori-

zation) number, please access ADVANTECH’s RMA web site:

http://www.advantech.com.tw/rma. If the web sever is shut down,

please contact our office directly. You should fill in the “Problem

Repair Form”, describing in detail the application environment,

configuration, and problems encountered. Note that error descrip-

tions such as “does not work” and “failure” are so general that we

are then required to apply our internal standard repair process.

4. Carefully pack the defective product, a completely filled-out Repair

and Replacement Order Card and a photocopy of dated proof of

purchase (such as your sales receipt) in a shippable container. A

product returned without dated proof of purchase is not eligible for

warranty service.

5. Write the RMA number visibly on the outside of the packageand

ship it prepaid to your dealer.

Contents

Chapter 0 Quick Start ................................... 0-1

Welcome & Preview .............................................. 0-2

0.1 System Requirements ...................................... 0-2

0.1.1 Host computer ............................................ 0-2

0.1.2 ADAM-5511 ................................................. 0-2

0.1.3 I/O modules ................................................ 0-3

0.1.4 Remote I/O Function for ADAM-4000 Modules

................................................................... 0-4

0.2 Configuration Guide ......................................... 0-4

0.2.1 Hardware configuration .............................. 0-4

0.2.2 Software configuration by ADAM-4000/5000

Windows Utility ........................................... 0-6

0.3 Windows Utility program ................................ 0-10

0.3.1 Hardware setup ........................................ 0-10

0.3.2 Windows Environment Configuration ....... 0-12

0.4 Conclusion ..................................................... 0-16

Chapter 1 Introduction ................................. 1-1

1.1 Standalone Data Acquisition and Control System .

.............................................................................. 1-2

1.2 Features .......................................................... 1-2

1.2.1 Control flexibility with C programming ........ 1-2

1.2.2 RS-232/485 communication ability ............. 1-2

1.2.3 Complete set of I/O modules for total solutions

................................................................... 1-3

1.2.4 Built-in real-time clock and watchdog timer 1-3

1.3 System Configuration....................................... 1-3

Chapter 2 System Specifications................ 2-1

2.1 Overview .......................................................... 2-2

2.2 Major Features ................................................ 2-2

2.3 Technical Specifications of the ADAM-5511 System

........................................................................ 2-3

2.3.1 System ....................................................... 2-3

2.3.2 RS-232 interface (COM1) .......................... 2-4

2.3.3 RS-485 interface (COM2) .......................... 2-4

2.3.4 RS-232 programming port (COM3) ............ 2-4

2.3.5 Remote I/O Modules................................... 2-4

2.3.6 Power ......................................................... 2-5

2.3.7 Mechanical ................................................. 2-5

2.3.8 Environment ............................................... 2-5

2.4 Basic Function Block Diagram ......................... 2-6

Chapter 3 Installation Guidelines................ 3-1

3.1 Module Installation ........................................... 3-2

3.2 I/O Slots and I/O Channel Numbering ............... 3-3

3.3 Mounting .......................................................... 3-3

3.4 Jumper Settings and DIP Switch Settings ........ 3-4

3.5 Wiring and Connections ................................... 3-8

3.6 LED Status of the ADAM-5511 Unit .............. 3-12

3.7 I/O Modules Configuration .............................. 3-12

Chapter 4 I/O Modules .................................. 4-1

4.1 Analog Input Modules ....................................... 4-2

ADAM-5013 3-channel RTD input module ........... 4-2

ADAM-5013 .......................................................... 4-2

Application wiring ................................................. 4-3

Technical specifications of ADAM-5013 ............... 4-4

4.2 ADAM-5013 RTD Input Resistance Calibration 4-5

Calibration resistances (ADAM-5013).................. 4-6

ADAM-5017 8-channel analog input module ........ 4-7

ADAM-5017 .......................................................... 4-7

Application wiring ................................................. 4-7

Technical specifications of ADAM-5017 ............... 4-8

ADAM-5017H 8-channel high speed analog input

module ..................................................... 4-10

ADAM-5017H ..................................................... 4-10

Application wiring ................................................4-11

Technical specifications of ADAM-5017H .......... 4-13

ADAM-5018 7-channel thermocouple input module ..

................................................................. 4-14

ADAM-5018 ........................................................ 4-15

Application wiring ............................................... 4-15

Technical specifications of ADAM-5018 ............. 4-16

4.3 Analog Output Modules .................................. 4-16

ADAM-5024 4-channel analog output module .... 4-16

Slew rate ............................................................ 4-17

ADAM-5024 ........................................................ 4-17

Application wiring ............................................... 4-18

Technical specifications of ADAM-5024 ............. 4-18

4.4 Analog I/O Modules Calibration ...................... 4-19

Analog input module calibration ......................... 4-19

Calibration voltage (ADAM-5017/5018) .............. 4-21

Calibration voltage (ADAM-5017H) .................... 4-23

Analog output module calibration ....................... 4-24

4.5 Digital Input/Output Modules ........................... 4-25

ADAM-5050 16-channel universal digital I/O module

................................................................. 4-25

ADAM-5050 ........................................................ 4-26

Application wiring ............................................... 4-26

Technical specifications of ADAM-5050 ............. 4-28

ADAM-5051 16-channel digital input module ..... 4-28

ADAM-5051 ........................................................ 4-28

Application wiring ............................................... 4-29

Technical specifications of ADAM-5051 ............. 4-29

ADAM-5052 8-channel isolated digital input module .

................................................................. 4-30

ADAM-5052 ........................................................ 4-30

Application wiring ............................................... 4-30

Technical specifications of ADAM-5052 ............. 4-31

ADAM-5056 16-channel digital output module ... 4-31

ADAM-5056 ........................................................ 4-31

Application wiring ............................................... 4-32

Technical specifications of ADAM-5056 ............. 4-32

4.6 Relay Output Modules .................................... 4-33

ADAM-5060 relay output module ....................... 4-33

ADAM-5060 ........................................................ 4-33

Application wiring ............................................... 4-33

Technical specifications of ADAM-5060 ............. 4-34

ADAM-5068 relay output module ....................... 4-34

ADAM-5068 ........................................................ 4-34

Application wiring ............................................... 4-35

Technical specifications of ADAM-5068 ............. 4-35

4.7 Counter/Frequency Module ............................ 4-36

Overview ............................................................ 4-36

Compatible ADAM-5000 Series Main Units ........ 4-36

ADAM-5080 4-channel Counter/Frequency Module .

................................................................. 4-36

ADAM-5080 Module Diagram ............................. 4-37

ADAM-5080 Application Wiring .......................... 4-37

ADAM-5080 Counter/Frequency Mode Selection 4-38

Features -- Counter Mode.................................. 4-39

Up/Down Counting ............................................. 4-39

Bi-direction Counting ......................................... 4-39

Features -- Frequency Mode ............................. 4-40

Setting Initial Counter Value ............................... 4-41

Features -- Alarm Setting .................................. 4-41

Overflow Value ................................................... 4-43

Getting the Totalizer Value.................................. 4-43

Inhaltsverzeichnis

Andere Advantech Controller Handbücher

Advantech

Advantech UNO-2182-D13BE Bedienungsanleitung

Advantech

Advantech MIC-3327DC01-A43E Installations- und Betriebshandbuch

Advantech

Advantech UNO-2053E Bedienungsanleitung

Advantech

Advantech B+B SmartWorx Wzzard BB-WSK-NRG-1 Benutzerhandbuch

Advantech

Advantech AMAX-1220 Series Bedienungsanleitung

Advantech

Advantech UNO-2050 Bedienungsanleitung

Advantech

Advantech PCA-6781 Installations- und Betriebshandbuch

Advantech

Advantech Celeron M Universal Network Controller with PC/104 Extension... Bedienungsanleitung

Advantech

Advantech AIIS-1882 Bedienungsanleitung

Advantech

Advantech PCL-839+ Bedienungsanleitung

Advantech

Advantech SKY-4120B Bedienungsanleitung

Advantech

Advantech PCI-1241 Bedienungsanleitung

Advantech

Advantech WISE-2210 Installations- und Betriebshandbuch

Advantech

Advantech UNO-2160 Bedienungsanleitung

Advantech

Advantech PCM-26D2CA Installations- und Betriebshandbuch

Advantech

Advantech ADAM-5510 Series Installations- und Betriebshandbuch

Advantech

Advantech UNO-2182 Bedienungsanleitung

Advantech

Advantech ADAMView Bedienungsanleitung

Advantech

Advantech Celeron M Universal Network Controller with PC/104 Extension... Bedienungsanleitung

Advantech

Advantech MVP-3245 Series Bedienungsanleitung

Advantech

Advantech UNO-2050E Bedienungsanleitung

Advantech

Advantech LNC-5800D Betriebsanleitung

Advantech

Advantech PCI-1760U Installations- und Betriebshandbuch

Advantech

Advantech MIC-1816R Installations- und Betriebshandbuch

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung