Advantech PCM-26D2CA Installations- und Betriebshandbuch

Packing List

PIN Assignment

Installation

PCM-26D2CA

2-Ports Isolated CANBus mPCIe, CANOpen, DB9

Startup Manual

Before installation, please ensure that the following items

have been included in your shipment:

1. mPCIe card with CAN controller x 1

2. DB9 I/O plate x 2 with iDoor bracket x 1

3. FPC cable x 2

4. Startup manual x 1

5. Warranty card x 1

If any of the above items are missing or damaged, contact

your distributor or sales representative immediately.

For more information on this and other Advantech

products, please visit our website at:

http://www.advantech.com

http://www.advantech.com/eAutomation

For technical support services, please visit our support

website at:

http://www.advantech.com.tw/eservice

This manual is for the PCM-26D2CA-BE.

Part No. 204426D201

Edition 2

December 2022

The following tables and figures show the pin assignments

of the connector on the bracket to the modular card. If you

see two ports or above, it will use the same pin-definition

as this one.

CAN Port

CAN_L

GND

CAN_H

PCM module with iDoor technology supports the following

Advantech platforms:

Automation computers - UNO series

Panel PC - TPC series

Modular IPC - MIC series

SeethefollowingpageforinstallationinTPCembeddedpanel

computers and UNO embedded computers.

PCM-26D2CA Startup Manual 1

Jumper Settings

Documentation/Software Support Guide

Orange

Green

Note: TX & RX will light up at the same time when TX

performs data transmission.

You can set the terminator resistor by jumper setting if

necessary to match impedance.

PIN# of JP1

Status

Value of Terminator

Resistor

PIN 1-2 (Default)

Closed Mode

120 Ohms

PIN 2-3

Open Mode

The support documentation can be accessed from https://

www.advantech.com/support.

2 PCM-26D2CA Startup Manual

1. Remove the screws from the back plate and lift it off.

2. Remove the screws from the blanking plate.

3. Insert the PCM Module through the open slot.

4. Secure the PCM Module with the screws you removed

from the blanking plate.

Embedded Panel Computer Installation

LED Indicator

FPC Cable Installation

1. Remove the screws from the base plate and lift it to

remove it.

2. Insert the mini-PCI card and secure with the screws.

3. Remove the screws to remove the blanking plate.

4. Insert the PCM Module through the blanking plate hole

and secure with screws. Attach the PCM Module to the

mini-PCIe card with the FPC cable.

Please follow the direction as shown inthe picture.

The corresponded port was marked A/B on motherboard for

cable plug-in direction.

PCM-26D2CA Startup Manual 3

Embedded Computer Installation

Andere Advantech Controller Handbücher

Advantech

Advantech UNO-2182-D13BE Bedienungsanleitung

Advantech

Advantech ADAMView Bedienungsanleitung

Advantech

Advantech UNO-2160 Bedienungsanleitung

Advantech

Advantech UNO-127 Bedienungsanleitung

Advantech

Advantech MIC-3321 Installations- und Betriebshandbuch

Advantech

Advantech MVP-3245 Series Bedienungsanleitung

Advantech

Advantech ADAM-5630 Series Bedienungsanleitung

Advantech

Advantech UNO-2182 Bedienungsanleitung

Advantech

Advantech INTRAC 204 Bedienungsanleitung

Advantech

Advantech WISE-2210 Installations- und Betriebshandbuch

Advantech

Advantech UNO-2053E Bedienungsanleitung

Advantech

Advantech GX2-400 Bedienungsanleitung

Advantech

Advantech UNO-348 Bedienungsanleitung

Advantech

Advantech WISE-4210-S231 Installations- und Betriebshandbuch

Advantech

Advantech ADAM-5510/P31 Bedienungsanleitung

Advantech

Advantech UNO-2050 Bedienungsanleitung

Advantech

Advantech PCA-6781 Installations- und Betriebshandbuch

Advantech

Advantech ADAM-5511 Bedienungsanleitung

Advantech

Advantech PCI-1241 Bedienungsanleitung

Advantech

Advantech AIIS-1882 Bedienungsanleitung

Advantech

Advantech PCI-1760U Installations- und Betriebshandbuch

Advantech

Advantech ADAM-5550KW Series Bedienungsanleitung

Advantech

Advantech Celeron M Universal Network Controller with PC/104 Extension... Bedienungsanleitung

Advantech

Advantech MIC-1816R Installations- und Betriebshandbuch

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung