Advantech SKY-7210 Installations- und Betriebshandbuch

SKY-7210 Startup Manual 1

Before installation, ensure that the following materials have

been received:

• One SKY-7210 Hybrid network server

• One box of accessories

• Onewarrantycerticate

If any of these items are missing or damaged, please con-

tact your distributor or sales representative immediately.

Note:  AcrobatReaderisrequiredtoviewanyPDFle.

Acrobat Reader can be downloaded at: www.

adobe.com/Products/acrobat/readstep2.html

(Acrobat is a trademark of Adobe)

SKY-7210

Intel® Xeon® Scalable Series Processor

2U Network Hybrid Network Server

Startup Manual

Main Board Functions

• Intel® Xeon® scalable processor supports up to 28 cores

(Skylake-SP)

• Chipset: Intel C621/C622

• BIOS: AMI 8-Mbit SPI Flash

• Memory: 24 x DDR4 ECC RDIMMs, up to 2666MHz and

up to 1563GB

• Ethernet: 3 x Intel I210-AT 10/100/1000Mbps (2 x for

Mgmt and 1 x for IPMI, and 2 x 10GB SFP+ (SKY-7210F)

• PCIe Riser:

- Max. 3 x Gen3, PCIe x16 add-on cards (by SKUs)

- Max. 6 x Gen3, PCI-E x8 add-on cards (by SKUs)

• NMC slots: 3 x NMC slots with PCIe x8 thumbs screw

type

• Storage: 12 x 3.5”/2.5” swappable HDD / SSD, 1 x M.2

Socket (22x80)

• Peripherals:

- USB2.0: 2 x USB2.0 ports on the front panel

- USB3.0: 2 x USB3.0 ports on the rear panel

- Serial: 1x D-sub console port on the rear panel

- VGA, 1 x D-sub graphic display port on the rear panel

• Dimensions (W x L x H): 438 x 730 x 88mm

• Weight: 26 - 28Kg

• Environment: Operating Non-operating

• Temperature: 0 ~ 40 -20 ~ 80

(32°F -104°F) (-4°F - 167°F)

• Humidity: 5% - 85% @40 (104°F) 5% - 95%

• Input Voltage: AC 100 ~ 240 V @ 50 ~ 60 Hz, full range

SpecicationsPacking List

For more information on this and other Advantech products,

please visit our website at:

http://www.advantech.com.tw/support

http://www.advantech.com

For technical support and service, please visit our support

website at:

http://support.advantech.com.tw/

is manual is for the SKY-7210 series Rev. A

Part No. 2042721000

Printed in China

Edition 1

November 2018

2 SKY-7210 Startup Manual

Express Modules

• Interface:

- GE Express Module:

Supports 4-ports 10/100/1000 Base-T copper module

Supports 4-ports 10/100/1000 Base-X SFP module

- 10GE Express Module:

Supports 2/4-ports 10GbE Base-F SFP+ module

• Controller:

- GE Express Module

Intel I350-AM4 GbE controllers with 1~2 LAN bypass

segments

- 10GE Express Module:

1x Intel XL710 4-ports 10GE controller

• Dimensions (W x D): 72 x 172 mm

Figure 1: NMC-0121 4 ports RJ45 GE module

Figure 2: NMC-0108 4 ports SFP GE module

Figure 3: NMC-0806 8 ports RG45 GE module

Figure 4: NMC-1004 2 ports SFP+ GE module

SKY-7210F Redundant PSU

Front view:

Back view:

SKY-7210L Redundant PSU

Front view:

Back view:

Specications

System Overview

SKY-7210 Startup Manual 3

Installing the CPUs

SKY-7210 main board supports dual-socket INTEL®

XEON® scalable processor family with LGA3647 socket.

For details of the XEON® scalable processor assembly,

please follow Intel’s instruction to install Xeon CPU on SKY-

7210 main board.

https://www.intel.com/content/www/us/en/support/ar-

ticles/000023869/processors/intel-xeon-processors.html

Installing PCIe Riser Cards

1. Remove PCIE riser by loosening the thumbs screws

from the chassis.

2. Install the PCIex8 or PCIex16 add-on card as shown

below:

Installing NMC Express Card

1. Take out the dummy NMC bracket, then slide the NMC

card into the NMC bay on the retention rail.

Installation

4 SKY-7210 Startup Manual

Installation

Installing Fan Modules (SKY-7210F)

1. Please release 6 screws and remove fan top cover.

2. To take out fan modules by loosening thumbs screws.

Installing 3.5” HDDs

1. Please remove 3.5” HDD tray.

2. Install 3.5” or 2.5” HDD on the HDD tray with 4 screws.

SKY-7210 Startup Manual 5

Front and Rear IO

SKY-7210L SKU:

Front IO:

Rear IO:

SKY-7210F SKU:

Software tested list:

•WindowsServer2012

•RedHatEnterprise5.4and6.1

1. Read these safety instructions carefully.

2. Keep this user manual for later reference.

3. Disconnect this equipment from AC outlet before clean

ing. Do not use liquid or spray detergents for cleaning.

4. For pluggable equipment, the power outlet shall be

installed near the equipment and shall be easily acces

sible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installa

tion. Dropping it or letting it fall could cause damage.

7. Do not leave this equipment in an environment uncon

ditioned where the storage temperature under 0°C

(32°F) or above 40°C (104°F), it may damage the

equipment.

8. The openings on the enclosure are for air convection

hence protects the equipment from overheating. DO

NOT COVER THE OPENINGS.

9. Make sure the voltage of the power source is correct

before connecting the equipment to the power outlet.

10. Place the power cord such a way that people can not

step on it. Do not place anything over the power cord.

The voltage and current rating of the cord should be

greater than the voltage and current rating marked on

the product.

11. All cautions and warnings on the equipment should be

noted.

12. If the equipment is not used for long time, disconnect it

from the power source to avoid being damaged by

transient over-voltage.

13. Never pour any liquid into ventilation openings. This

couldcausereorelectricalshock.

14. Never open the equipment. For safety reasons, the

equipmentshouldbeopenedonlybyqualiedservice

personnel.

15. If any of the following situations arises, get the equip

ment checked by service personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well or you cannot get

it to work according to user manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

16. CAUTION: The computer is provided with a battery-

powered real-time clock circuit. There is a danger of

explosion if bat¬tery is incorrectly replaced. Replace

only with same or equivalent type recommended by the

manufacture. Discard used batteries according to the

manufacturer’s instructions.

17. The computer is provided with CD drives that comply

with appropriate safety standards, including IEC 60825.

Software Installation

Safety Instructions

6 SKY-7210 Startup Manual

18. This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions: (1)

this device may not cause harmful interference, and (2)

this device must accept any interference received,

including interference that may cause undesired opera

tion.

19. CAUTION: Always completely disconnect the power

cord from your chassis whenever you work with the

hardware. Do not make connections while the power

is on. Sensitive electronic components can be dam

aged by sudden power surges.

20. CAUTION: Always ground yourself to remove any static

charge before touching the motherboard, backplane, or

add-on cards. Modern electronic devices are very

sensitive to static electric charges. As a safety precau

tion, use a grounding wrist strap at all times. Place all

electronic components on a static-dissipative surface

or in a static-shielded bag when they are not in the

chassis.

21. CAUTION:Anyunveriedcomponentcouldcauseun

expected damage. To ensure the correct installation,

please always use the components (ex. screws) pro

vided with the accessory box.

22. Caution text concerning lithium batteries:

ADVARSEL!

Lithiumbatteri - Eksplosionsfare ved fejlagtig

håndtering.

Udskiftning må kun ske med batteri af samme

fabrikat og type.

Levér det brugte batteri tilbage tilleverandøren.

23. “Rack Mount Instructions - The following or similar

rack-mount instructions are included with the installa

tion instructions:

A) Elevated Operating Ambient - If installed in a closed or

multi-unit rack assembly, the operating ambient

temperature of the rack environment may be greater

than room ambient. Therefore, consideration should be

given to installing the equipment in an environment

compatible with the maximum ambient temperature

(Tma)speciedbythemanufacturer.

B) Reduced Air Flow - Installation of the equipment in a

rackshouldbesuchthattheamountofairowrequired

for safe operation of the equipment is not compro

mised.

C) Mechanical Loading - Mounting of the equipment in

the rack should be such that a hazardous condition is

not achieved due to uneven mechanical loading.

D) Circuit Overloading - Consideration should be given

to the connection of the equipment to the supply circuit

Safety Instructions

and the effect that overloading of the circuits might

have on overcurrent protection and supply wiring.

Appropriate consideration of equipment nameplate rat

ings should be used when addressing this concern.

E) Reliable Earthing - Reliable earthing of rack-mounted

equipment should be maintained. Particular attention

should be given to supply connections other than direct

connections to the branch circuit (e.g. use of power

strips).”

Inhaltsverzeichnis

Andere Advantech Server Handbücher

Advantech

Advantech EKI-1512X Bedienungsanleitung

Advantech

Advantech AGS-923 2U Installations- und Betriebshandbuch

Advantech

Advantech SKY-8101 Bedienungsanleitung

Advantech

Advantech EPC-T2000 Series Bedienungsanleitung

Advantech

Advantech ISV-1320-ISC Bedienungsanleitung

Advantech

Advantech MIC-6314 Series Bedienungsanleitung

Advantech

Advantech ECU-579 Series Bedienungsanleitung

Advantech

Advantech DMS-SA21 Installations- und Betriebshandbuch

Advantech

Advantech DVG-1100 Bedienungsanleitung

Advantech

Advantech VESR900 Series Bedienungsanleitung

Advantech

Advantech ASMB-977 Installations- und Betriebshandbuch

Advantech

Advantech SKY-524 2U Installations- und Betriebshandbuch

Advantech

Advantech PCE-5B12-00A1E Installations- und Betriebshandbuch

Advantech

Advantech SKY-8132S-11 Bedienungsanleitung

Advantech

Advantech ADAM-4571 Bedienungsanleitung

Advantech

Advantech SKY-642 Bedienungsanleitung

Advantech

Advantech SPC-520 Series Bedienungsanleitung

Advantech

Advantech PAC-4010 Bedienungsanleitung

Advantech

Advantech EKI-1528-DR Bedienungsanleitung

Advantech

Advantech EKI-1526 Bedienungsanleitung

Advantech

Advantech BB-VESR9 Series Bedienungsanleitung

Advantech

Advantech ASMB-815 Series Installations- und Betriebshandbuch

Advantech

Advantech FWA-5070 Bedienungsanleitung

Advantech

Advantech EKI-1351 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung