Advantech SKY-524 Bedienungsanleitung

User Manual

SKY-524

2U 4 Node Hybrid Server with

High Density and Flexible

Storage capability, support dual

10GbE and 2x PCIe x16 slots per

node.

SKY-524 User Manual ii

The documentation and the software included with this product are copyrighted 2019

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right

to make improvements in the products described in this manual at any time without

notice. No part of this manual may be reproduced, copied, translated or transmitted

in any form or by any means without the prior written permission of Advantech Co.,

Ltd. Information provided in this manual is intended to be accurate and reliable. How-

ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-

ments of the rights of third parties, which may result from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.

All other product names or trademarks are properties of their respective owners.

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its products will be

free from defects in materials and workmanship for two years from the date of pur-

chase.

This warranty does not apply to any products which have been repaired or altered by

persons other than repair personnel authorized by Advantech, or which have been

subject to misuse, abuse, accident or improper installation. Advantech assumes no

liability under the terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous testing, most of

our customers never need to use our repair service. If an Advantech product is defec-

tive, it will be repaired or replaced at no charge during the warranty period. For out-

of-warranty repairs, you will be billed according to the cost of replacement materials,

service time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example, CPU

speed, Advantech products used, other hardware and software used, etc.) Note

anything abnormal and list any onscreen messages you get when the problem

occurs.

2. Call your dealer and describe the problem. Please have your manual, product,

and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return merchandize

authorization) number from your dealer. This allows us to process your return

more quickly.

4. Carefully pack the defective product, a fully-completed Repair and Replacement

Order Card and a photocopy proof of purchase date (such as your sales receipt)

in a shippable container. A product returned without proof of the purchase date

is not eligible for warranty service.

5. Write the RMA number visibly on the outside of the package and ship it prepaid

to your dealer.

Part No. 2001Y52400 Edition 1

Printed in Taiwan March 2019

iii SKY-524 User Manual

A Message to the Customer

Advantech Customer Services

Each and every Advantech product is built to the most exacting specifications to

ensure reliable performance in the harsh and demanding conditions typical of indus-

trial environments. Whether your new Advantech equipment is destined for the labo-

ratory or the factory floor, you can be assured that your product will provide the

reliability and ease of operation for which the name Advantech has come to be

known.

Your satisfaction is our primary concern. Here is a guide to Advantech’s customer

services. To ensure you get the full benefit of our services, please follow the instruc-

tions below carefully.

Technical Support

We want you to get the maximum performance from your products. So if you run into

technical difficulties, we are here to help. For the most frequently asked questions,

you can easily find answers in your product documentation. These answers are nor-

mally a lot more detailed than the ones we can give over the phone.

So please consult this manual first. If you still cannot find the answer, gather all the

information or questions that apply to your problem, and with the product close at

hand, call your dealer. Our dealers are well trained and ready to give you the support

you need to get the most from your Advantech products. In fact, most problems

reported are minor and are easily solved over the phone.

In addition, free technical support is available from Advantech engineers every busi-

ness day. We are always ready to give advice on application requirements or specific

information on the installation and operation of any of our products.

Declaration of Conformity

FCC Class A

Note: This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Opera-

tion of this equipment in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interference at his own expense.

SKY-524 User Manual iv

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a damp

cloth. Do not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the equip-

ment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting

it fall may cause damage.

7. Do not leave this equipment in an environment unconditioned where the storage

temperature under 0° C (32° F) or above 35° C (95° F), it may damage the

equipment.

8. The openings on the enclosure are for air convection. Protect the equipment

from overheating. DO NOT COVER THE OPENINGS.

9. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet and with earth connection. Ensure to connect the

power cord to a socket-outlet with earthing connection.

10. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

11. All cautions and warnings on the equipment should be noted.

12. If the equipment is not used for a long time, disconnect it from the power source

to avoid damage by transient overvoltage.

13. Never pour any liquid into an opening. This may cause fire or electrical shock.

14. Never open the equipment. For safety reasons, repair of the device may only be

carried out by trained service personnel.

15. If one of the following situations arises, get the equipment checked by service

personnel:

–The power cord or plug is damaged.

–Liquid has penetrated into the equipment.

–The equipment has been exposed to moisture.

–The equipment does not work well, or you cannot get it to work according to

the user's manual.

–The equipment has been dropped and damaged.

–The equipment has obvious signs of breakage.

16. CAUTION: The computer is provided with a battery-powered real-time clock cir-

cuit. There is a danger of explosion if battery is incorrectly replaced. Replace

only with same or equivalent type recommended by the manufacture. Discard

used batteries according to the manufacturer’s instructions.

(1) CAUTION: Risk of Explosion if Battery is replaced by an Incorrect Type. Dis-

pose of Used Batteries According to the Instructions.

(1) ATTENTION: Risque d’explosion si la batterie est remplacée par un type

incorrect. Mettre au rebus les batteries usagées selon les instructions.

17. THE COMPUTER IS PROVIDED WITH CD DRIVES (or Laser Product) COM-

PLY WITH APPROPRIATE SAFETY STANDARDS INCLUDING IEC 60825-1 or

EN 60825-1.

(1) Avoid direct exposure to the laser beam. Do not open the laser device enclo-

sure. There are no user serviceable components inside.

(2) Do not operate controls, make adjustments, or perform procedures to the

laser device other than those specified herein.

(3) Allow only authorized service technicians to repair the laser device.

v SKY-524 User Manual

18. This device complies with Part 15 of the FCC rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference

that may cause undesired operation.

19. CAUTION: Always completely disconnect the power cord from your chassis

whenever you work with the hardware. Do not make connections while the

power is on. Sensitive electronic components can be damaged by sudden

power surges.

20. CAUTION: Always ground yourself to remove any static charge before touching

the mainboard, backplane, or add-on cards. Modern electronic devices are very

sensitive to static electric charges. As a safety precaution, use a grounding wrist

strap at all times. Place all electronic components on a static-dissipative surface

or in a static-shielded bag when they are not in the chassis.

21. CAUTION: Any unverified component could cause unexpected damage. To

ensure the correct installation, please always use the components (ex. screws)

provided with the accessory box.

22. CAUTION: This product is not intended for use by children (this product is not a

toy).

(1) This equipment is not suitable for use in locations where children are likely to

be present.

23. CAUTION: Improper installation of VESA mounting can result in serious per-

sonal injury! Use suitable mounting apparatus to avoid risk of injury. VESA

mount installation should be operated by professional technician, please contact

the service technician or your retailer if you need this service.

24. Repair of the device may only be carried out by trained service personnel.

Advantech recommends that a service contract be obtained with Advantech

Service and that all repairs also be carried out by them. Otherwise the correct

functioning of the device may be compromised.

25. CAUTION: Do not modify this equipment without authorization of the manufac-

turer.

26. CAUTION: To avoid risk of electric shock, this equipment must only be con-

nected to supply mains with protective earth.

27. CAUTION: Remove the power cord to fully turn off the device.

28. CAUTION: If this device was not used in the manner which manufacturer sug-

gested, the end system shall evaluate for further compliance.

29. CAUTION: Never immerse equipment or electrical connectors in water or other

liquids.

30. CAUTION: Remove the power cord before change FUSE and replace only with

the same ratings and type of FUSE.

31. Observe local occupational health and safety requirements and guidelines for

manual materials handling.

32. Do not attempt to move a equipment by yourself; at least two people are needed

to move a equipment.

33. Use only the power cords and power supply units provided with your equipment.

The equipment might have one or more power cords. For North America, a UL

listed and CSA labeled power cord must be used with the equipment.

34. Operation of the device without regulatory approval is illegal.

SKY-524 User Manual vi

35. CAUTION: Disposal of a battery (or battery pack) into fire or a hot oven, or

mechanically crushing or cutting of a battery (or battery pack), that can result in

an EXPLOSION; leaving a battery (or battery pack) in an extremely high tem-

perature surrounding environment that can result in an EXPLOSION or the leak-

age of flammable liquid or gas; a battery (or battery pack) subjected to

extremely low air pressure that may result in an EXPLOSION or the leakage of

flammable liquid or gas. Discard used batteries according to the manufacturer’s

instructions.

36. CAUTION: To disconnect power, remove all power cords.

37. CAUTION: Monitor equipment (or display): It may endanger eyes when over-

used.

(1) Please take a rest for 10 minutes after using 30 minutes.

(2) Do not let the children under 2 years old watching the monitor (or display).

For children over (including) 2 years old, do not watch the monitor (od display)

over 1 hour each day.

38. CAUTION: If the user does not follow the user manual to use the equipment, it

will have risk to cause the bottom side opening of the equipment.

39. CAUTION: Any changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate this equip-

ment.

Contact information:

Advantech Co., Ltd.

Website: www.advantech.com.tw

Address: No.1, Alley 20, Lane 26, Rueiguang Road Neihu District, Taipei, Taiwan

114, R.O.C.

TEL: +886-2792-7818

vii SKY-524 User Manual

Safety Information

Retain and follow all product safety and operating instructions provided with your

equipment. In the event of a conflict between the instructions in this guide and the

instructions in equipment documentation, follow the guidelines in the equipment doc-

umentation.

Observe all warnings on the product and in the operating instructions. To reduce the

risk of bodily injury, electric shock, fire and damage to the equipment, observe all pre-

cautions included in this guide.

You must become familiar with the safety information in this guide before you install,

operate, or service Advantech products.

Machine Room Environment

Make sure that the area in which you install the system is properly ventilated

and climate-controlled.

Ensure that the voltage and frequency of your power source match the voltage

and frequency inscribed on the electrical rating label of the equipment.

Do not install the system in or near a plenum, air duct, radiator, or heat register.

Never use the product in a wet location.

Equipment Chassis

Do not block or cover the openings to the system.

Never push objects of any kind through openings in the equipment.

Dangerous voltages might be present.

Conductive foreign objects can produce a short circuit and cause fire, electric

shock, or damage to your equipment.

Lift equipment using both hands and with your knees bent.

Rack Mount Instructions

The following or similar rack-mount instructions are included with the installation

instructions:

Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly,

the operating ambient temperature of the rack environment may be greater than

room ambient. Therefore, consideration should be given to installing the equip-

ment in an environment compatible with the maximum ambient temperature

(Tma) specified by the manufacturer.

Reduced Air Flow - Installation of the equipment in a rack should be such that

the amount of air flow required for safe operation of the equipment is not com-

promised.

Mechanical Loading - Mounting of the equipment in the rack should be such that

a hazardous condition is not achieved due to uneven mechanical loading.

Circuit Overloading - Consideration should be given to the connection of the

equipment to the supply circuit and the effect that overloading of the circuits

might have on over current protection and supply wiring.

Appropriate consideration of equipment nameplate ratings should be used when

addressing this concern.

Reliable Earthing - Reliable earthing of rackmounted equipment should be

maintained. Particular attention should be given to supply connections other

than direct connections to the branch circuit (e.g. use of power strips).

SKY-524 User Manual viii

Make sure only one component is extended at a time. A rack might become

unstable if more than one component is extended.

Equipment Batteries*

The system battery contains lithium manganese dioxide. If the battery pack is

not handled properly, there is risk of fire and burns.

Do not disassemble, crush, puncture, short external contacts, or dispose of the

battery in fire or water.

Do not expose the battery to temperatures higher than 60°C (140°F).

The system battery is not replaceable. If the battery is replaced by an incorrect

type, there is danger of explosion. Replace the battery only with a spare desig-

nated for your product.

Do not attempt to recharge the battery.

Dispose of used batteries according to the instructions of the manufacturer.

Do not dispose of batteries with the general household waste. To forward them

to recycling or proper disposal, use the public collection system or return them

to Advantech, your authorized Advantech partner, or their agents.

Equipment Modifications

Do not make mechanical modifications to the system. Advantech is not respon-

sible for the regulatory compliance of Advantech equipment that has been mod-

ified.

Equipment Repairs and Servicing

The installation of internal options and routine maintenance and service of this

product should be performed by individuals who are knowledgeable about the

procedures, precautions, and hazards associated with equipment containing

hazardous energy levels.

Do not exceed the level of repair specified in the procedures in the product doc-

umentation. Improper repairs can create a safety hazard.

Allow the product to cool before removing covers and touching internal compo-

nents.

Remove all watches, rings, or loose jewelry when working before removing cov-

ers and touching internal components.

Do not use conductive tools that could bridge live parts.

Use gloves when you remove or replace system components; they can become

hot to the touch.

–If the product sustains damage requiring service, disconnect the product from

the AC electrical outlet and refer servicing to an authorized service provider.

Examples of damage requiring service include:

–The power cord, extension cord, or plug has been damaged.

–Liquid has been spilled on the product or an object has fallen into the product.

–The product has been exposed to rain or water.

–The product has been dropped or damaged.

–The product does not operate normally when you follow the operating instruc-

tions.

ix SKY-524 User Manual

Peripheral Compatibility

Category Advantech PN Vendor Part Description Remarks

CPU

TBD Intel Xeon Bronze 3104/1.70GHz/

8.25M/6Cores 85W

96MPXE-1.7-11M36 Intel Xeon Bronze 3106/1.70GHz/

11M/8Cores 85W

TBD Intel Xeon Silver 4108/1.80GHz/

11M/8Cores 85W

96MPXE-2.0-11M36 Intel Xeon Silver 4109T/2.0GHz/

11M/8Cores 70W

96MPXE-2.1-11M36 Intel Xeon Silver 4110/2.1GHz/11M/

8Cores 85W

TBD Intel Xeon Silver 4112/2.6GHz/

8.25M/4Cores 85W

TBD Intel Xeon Silver 4114/2.2GHz/

13.75M/10Cores 85W

96MPXE-2.1-16M36 Intel Xeon Silver 4116/2.1GHz/

16.5M/12Cores 85W

TBD Intel Xeon Gold 5115/2.4GHz/

13.75M/10Cores 85W

96MPXE-2.3-16M36 Intel Xeon Gold 5118/2.3GHz/

16.5M/12Cores 105W

TBD Intel Xeon Gold 5120/2.2GHz/

19.25M/14Cores 105W

96MPXE-2.2-19M36 Intel Xeon Gold 5120T/2.2GHz/

19.25M/14Cores 105W

TBD Intel Xeon Gold 6140/2.3GHz/

24.75M/18Cores 140W

Memory

AQD-D4U4GR24-HG ADATA 4G DDR4-2400 RDIMM REG-ECC

SQR-RD4M-

32G2K4SRB Advantech 32G DDR4-2400 RDIMM REG-ECC

SQR-

RD4N8G2K4SZBBB Advantech 8G DDR4-2400 RDIMM REG-ECC

SAS HDD

96ND2.4T-SS-SG10E Seagate 2.5" Enterprise SASIII 2.4TB ST2400MM

0129

96ND1.2T-SS-SG10E1 Seagate 2.5" Enterprise SASIII 1.2TB ST1200MM

0129

CPU

Heatsink

1960081155N101 CoolJag H.S R3 I-Skylake-SP S-165W

108x78.0x25.5-SC For CPU1

1960081155N001 CoolJag Heatsink I-Skylake-EP S-

165W 107.75x78.0x25.5-SC For CPU0

Riser

Card

9691Y524500 Advantech SKY-524 PCIex16 riser Card,

left site -

9691Y524600 Advantech SKY-524 PCIex16 riser Card,

right site -

Power

supply

96PSRM-A2K2W1UT Compuware 2000W CRPS Module

2200W

Slim power

module

XSKY-CPR-2021-2H7 Compuware 2000W CRPS Module

2200W

Redundant

PDB

SKY-524 User Manual x

Initial Inspection

Before powering up the system, please make sure that the following materials have

been shipped:

1 x SKY-524 system

8 x CPU heatsink total (2 x CPU heatsink per node)

1 x Accessory Box

24 x 2.5" HDD trays

1 x Warranty card

If any of these items are missing or damaged, contact distributor or sales representa-

tive immediately. We have carefully inspected the SKY-524 mechanically and electri-

cally before shipment. It should be free of marks and scratches and in perfect

working order upon receipt. When unpacking the SKY-524, check it for signs of ship-

ping damage. (For example, damaged box, scratches, dents, etc.) If it is damaged or

it fails to meet the specifications, notify our service department or local sales repre-

sentative immediately. Also notify the carrier. Retain the shipping carton and packing

material for inspection by the carrier. After inspection, we will make arrangements to

repair or replace the unit.

Order Information

Note! When first powering up the system, please help to download the latest

BMC firmware in Advantech website and via BMC Web GUI to do the

BMC update.

Note! 220V power input voltage recommend and please plug two power cord

in different power sources.

Part number Node 2.5" HDD Power Supply

SKY-5240-24A1 4 24 2200W 1+1 Redundant Power Supply

Inhaltsverzeichnis

Andere Advantech Server Handbücher

Advantech

Advantech EKI-1528I Bedienungsanleitung

Advantech

Advantech EKI-1500 Series Bedienungsanleitung

Advantech

Advantech IMC-710-A Bedienungsanleitung

Advantech

Advantech SKY-8201L Series Bedienungsanleitung

Advantech

Advantech SPC-530 Bedienungsanleitung

Advantech

Advantech SKY-6200 Bedienungsanleitung

Advantech

Advantech ECU-4784 Series Bedienungsanleitung

Advantech

Advantech EKI-1526 Bedienungsanleitung

Advantech

Advantech FWA-T011 Bedienungsanleitung

Advantech

Advantech SKY-642 Bedienungsanleitung

Advantech

Advantech SKY-8132S-11 Bedienungsanleitung

Advantech

Advantech SKY-6100 Bedienungsanleitung

Advantech

Advantech ASMB-622 Bedienungsanleitung

Advantech

Advantech EPC-T2000 Series Bedienungsanleitung

Advantech

Advantech ISV-1320-ISC Bedienungsanleitung

Advantech

Advantech AGS-923 Installations- und Betriebshandbuch

Advantech

Advantech RS-100-RT Bedienungsanleitung

Advantech

Advantech ASMB-830 Series Installations- und Betriebshandbuch

Advantech

Advantech EKI-1351 Bedienungsanleitung

Advantech

Advantech BB-VESR9 Series Bedienungsanleitung

Advantech

Advantech MIC-6314 Series Bedienungsanleitung

Advantech

Advantech EKI-1511L Bedienungsanleitung

Advantech

Advantech SKY-8132S Bedienungsanleitung

Advantech

Advantech EKI-1511 Series Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung