Advantech PPC-A84/A120-X5X Bedienungsanleitung

PPC-A84/A120-X5X

NS GXm/GX1 processor-based

Panel PC with 8.4"/12.1" LCD

flat panel display

User's Manual

This document is copyrighted June, 2001 by Advantech Co., Ltd. All

rights are reserved. Advantech Co., Ltd. reserves the right to make

improvements to the products described in this manual at any time

without notice.

No part of this manual may be reproduced, copied, translated or

transmitted in any form or by any means without the prior written

permission of Advantech Co., Ltd. Information provided in this manual

is intended to be accurate and reliable. However,

Advantech Co., Ltd assumes no responsibility for its use, nor for any

infringements upon the rights of third parties which may result from its

use.

All brand and product named mentioned herein are trademarks or

registered trademarks of their respective holders.

PartNo.2008000030

1st Edition Printed in Taiwan January 2001

FCC Class B notes

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

- Reorient or relocate the receiving antenna

- Increase the separation between the equipment and receiver

- Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected

- Consult the dealer or an experienced radio/TV technician for help

Warning: Any changes or modifications made to the equip-

ment which are not expressly approved by the

relevantstandardsauthoritycouldvoidyourauthority

tooperatetheequipment.

Packing List

Before you begin system installation, please make sure that the

following materials have been shipped:

• PPC-A84-X5X/PPC-A120-X5X

• User's manual

• Accessories for PPC-A84/A120

-External FDDflat cablefor FDD(34-pin)

-External IDEcable for HDDor CD-ROM (40-pin)

- Power cable for external FDD or IDE device (4-pin)

-DC Power inlet cable(180 cm)

- Assembly mounting screws

- "Drivers and Utilities" CD-ROM disk

- Hard drive disk carrier and connector

- Male contact pin x 3 and female contact pin x 3

- A pair of DC power insulators with hood

If any of these items is missing or damaged, contact your

distributor or sales representative immediately.

Note: If the unit you bought is basic system (ie. without a

hard driver), you will find a HDD carrier kit in the

accessory box.

Additional Information and Assistance

1. Visit theAdvantech web siteat www.advantech.com.twwhereyou

can find the latest information about the product.

2. Contact your distributor, sales representative, or Advantech's

customer service center for technical support if you need additional

assistance. Please have the following information ready before you

call:

• Product name and serial number

• Description of your peripheral attachments

• Description of your software (operating system, version,

application software, etc.)

• A complete description of the problem

• The exact wording of any error messages

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this installation reference guide for later reference.

3. Disconnect this equipment from any AC outlet or DC adapter before

cleaning. Do not use liquid or spray detergents for cleaning. Use a damp

cloth.

4. For pluggable equipment, the power outlet must be installed near the

equipment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or

letting it fall could cause damage.

7. These is no openings on the enclosure. Please keep it in air convection

environment. Protect the equipment from overheating.

8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place

anything over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power

source to avoid damage by transient over-voltage.

12. Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

13. If any of the following situations arises, get the equipment checked by

service personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well, or you cannot get it to work

according to the installation reference guide.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

14. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED

ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS BELOW

-20°C (-4°F) OR ABOVE 60°C (140°F). IT MAY DAMAGE THE

EQUIPMENT.

The sound pressure level at the operator's position according to IEC 704-1:1982

is equal to or less than 70 dB(A).

DISCLAIMER: This set of instructions is given according to IEC 704-1.

Advantech disclaims all responsibility for the accuracy of any statements

contained herein.

Wichtige Sicherheishinweise

1. Bitte lesen sie Sich diese Hinweise sorgfältig durch.

2. Heben Sie diese Anleitung für den späteren Gebrauch auf.

3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden Sie Keine Flüssig-

oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch zur Reinigung.

4. Die NetzanschluBsteckdose soll nahe dem Gerät angebracht und leicht zugänglich sein.

5. Das Gerät ist vor Feuchtigkeit zu schützen.

6. Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten. Ein Kippen oder Fallen

könnte Verletzungen hervorrufen.

7. Die Belüftungsöffnungen dienen zur Luftzirkulation die das Gerät vor überhitzung schützt.

Sorgen Sie dafür, daB diese Öffnungen nicht abgedeckt werden.

8. Beachten Sie beim. AnschluB an das Stromnetz die AnschluBwerte.

9. Verlegen Sie die NetzanschluBleitung so, daB niemand darüber fallen kann. Es sollte auch

nichts auf der Leitung abgestellt werden.

10. Alle Hinweise und Warnungen die sich am Geräten befinden sind zu beachten.

11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten Sie es vom Stromnetz

trennen. Somit wird im Falle einer Überspannung eine Beschädigung vermieden.

12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder Flüssigkeiten in das Gerät

gelangen. Dies könnte einen Brand bzw. elektrischen Schlag auslösen.

13. Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen der elektrischen Sicherheit nur

von authorisiertem Servicepersonal geöffnet werden.

14. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz zu trennen und von einer

qualifizierten Servicestelle zu überprüfen:

a. Netzkabel oder Netzstecker sind beschädigt.

b. Flüssigkeit ist in das Gerät eingedrungen.

c. Das Gerät war Feuchtigkeit ausgesetzt.

d. Wenn das Gerät nicht der Bedienungsanleitung entsprechend funktioni ert oder Sie mit

Hilfe dieser Anleitung keine Verbesserung erzielen.

e. Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt.

f. Wenn das Gerät deutliche Anzeichen eines Defektes aufweist.

15. Bitte lassen Sie das Gerät nicht unbehehrt hinten unter -20° C (-4° F) oder oben 60° C

(140° F), weil diesen Temperaturen das Gerät zerstören könten.

Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000 beträgt 70 dB(A) oder

weiger.

DISCLAIMER: This set of instructions is given according to IEC704-1. Advantech disclaims all

responsibility for the accuracy of any statements contained herein.

Contents

Chapter 1 General Information ...................................... 1

1.1 Introduction .......................................................................... 2

1.2 Specifications........................................................................ 3

General .......................................................................................3

Standard SBC functions (PCM-5821)........................................3

LCD Specification ......................................................................4

PCMCIA module (Optional) ......................................................6

Environmentalspecifications ......................................................6

1.3 Front View............................................................................. 7

Power Indicator.........................................................................7

1.4 Dimensions ........................................................................... 8

1.5 Cutout Dimensions(Suggestion) ....................................... 9

1.6 Panel Mounting.................................................................. 10

1.7 Universal Mounting Arm (Optional) .............................. 11

1.8 Important Notice ............................................................... 13

Chapter 2 System Setup .............................................. 15

2.1 A Quick Tour of the Panel PC......................................... 16

2.2 Preparing For First-time Usage ...................................... 21

2.3 Installation Procedures..................................................... 21

2.3.1 Connecting the power inlet cable (180 cm) .....................21

2.3.2 Connecting the insulator to your power sources..............22

2.3.3 Installing a primary 2.5" HDD (plug-in) ..........................25

2.3.4 Installing DRAM (SODIMM).........................................25

2.4 Installing I/O Equipment.................................................. 27

2.4.1 Installing one external IDE (3.5" HDD/CD-ROM) device

and an external FDD ................................................................27

2.4.2 PS/2 keyboard and PS/2 mouse .....................................28

2.4.3 Mic-in, line-in, speaker out .............................................28

2.4.4 External VGA.................................................................29

2.4.5 Two serial COM ports....................................................29

2.4.6 USB ports .......................................................................29

2.4.7 Parallel port ...................................................................30

2.4.8 Ethernet ..........................................................................30

2.5 How to Install Software to the HDD............................... 31

2.5.1 Method 1: Use the Ethernet ............................................31

2.5.3 Method 3: Use the COM or parallel port ........................31

2.5.4 Method 4: Use a 3.5" HDD or CD-ROM.......................31

2.6 Running the BIOS Setup Program ................................. 32

2.7 Installing System Software ............................................... 32

2.8 Installing the Drivers........................................................ 33

Chapter 3 The Engine of the PPC-A84/A120-X5X

(PCM-5821)............................................... 35

3.1 Introduction ........................................................................ 36

3.2 Features .............................................................................. 37

3.3 Jumpers and Connectors ................................................. 38

3.3.1 Setting jumpers ................................................................38

3.3.2 Jumpers ...........................................................................39

3.3.3 Connectors.......................................................................40

3.4 Wake on LAN Selection (Reserved) (JP1) ................... 43

3.5 CMOS Clear (JP2) ............................................................ 43

3.6 Watchdog Timer Configuration ....................................... 43

3.6.1 Watchdog activity selection (JP2) ...................................44

3.7 COM2 RS-232/422/485 setting (JP3, JP4,JP5) ........... 44

3.8 Buzzer enable (JP10) ........................................................ 45

Chapter 4 PCI Bus Ethernet Interface......................... 47

4.1 Introduction ........................................................................ 48

4.2 Installation of Ethernet Driver ........................................ 48

4.2.1 Installation for WINDOWS 95........................................49

4.2.2 Installation for WINDOWS 98........................................53

4.2.3 Installation for WINDOWS NT ......................................54

4.3 Further Information........................................................... 59

Chapter 5 PCI SVGA Setup.......................................... 61

5.1 Introduction ........................................................................ 62

5.1.1 Chipset .............................................................................62

5.1.2 Display memory...............................................................62

5.1.3 Display types ...................................................................62

5.2 Installation of SVGA Driver ............................................. 62

5.2.1 Installation for Windows 95 .............................................64

5.2.2 Installation for WINDOWS 98.......................................68

5.2.3 Installation for WINDOWS NT ......................................71

5.3 Further Information........................................................... 73

Chapter 6 Touchscreen ............................................... 75

6.1 Introduction ........................................................................ 76

6.2 Installation of Touch Screen Driver for the PPC-A84 76

6.2.1 Installation for MS-DOS..................................................77

6.2.2 Installation for Windows 95 .............................................78

6.2.3 Installation for Windows 98 .............................................80

6.2.4 Installation for Windows NT............................................82

6.3 Installation for Touch Screen Driver for the PPC-A120

6.3.1 Installation for Windows 95 .............................................85

6.3.2 Installation for Windows 98 .............................................87

6.3.3 Installation for Windows NT............................................89

Chapter 7 Audio Setup................................................. 93

7.1 Introduction ........................................................................ 94

7.2 Installation of Audio Driver ............................................. 94

7.2.1 Installation for Windows 95 .............................................95

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Advantech Touchscreen Handbücher

Advantech

Advantech PPC-S154T Bedienungsanleitung

Advantech

Advantech IPPC-9120G Bedienungsanleitung

Advantech

Advantech TPC-300 Elkhart Lake Series Bedienungsanleitung

Advantech

Advantech IPPC-6152F Series Bedienungsanleitung

Advantech

Advantech PPC-157T Bedienungsanleitung

Advantech

Advantech IPPC-6172F Series Bedienungsanleitung

Advantech

Advantech PPC-6121 Bedienungsanleitung

Advantech

Advantech TPC-1770 Bedienungsanleitung

Advantech

Advantech UTC-318H Bedienungsanleitung

Advantech

Advantech PPC-3151SW Bedienungsanleitung

Advantech

Advantech PPC-120 Bedienungsanleitung

Advantech

Advantech PPC-154 Bedienungsanleitung

Advantech

Advantech TPC-650H Bedienungsanleitung

Advantech

Advantech PPC-3151W Bedienungsanleitung

Advantech

Advantech PPC-L127T Bedienungsanleitung

Advantech

Advantech PPC-3211SW Installations- und Betriebshandbuch

Advantech

Advantech PPC-112W Installations- und Betriebshandbuch

Advantech

Advantech PPC-150T-RT Bedienungsanleitung

Advantech

Advantech POC-128 Gebrauchsanweisung

Advantech

Advantech TPC-60S Bedienungsanleitung

Advantech

Advantech PPC-A84 Bedienungsanleitung

Advantech

Advantech POC-174 Bedienungsanleitung

Advantech

Advantech ITA-8100 Bedienungsanleitung

Advantech

Advantech PPC-318W Installations- und Betriebshandbuch

Beliebte Touchscreen Handbücher anderer Marken

FlowLine

FlowLine Data loop Bedienungsanleitung

ALPEX

ALPEX AEx-8 P Series Bedienungsanleitung

Ltech

Ltech E5S Bedienungsanleitung

Harman

Harman AMX MODERO S MSD-701-L2 Bedienungsanleitung

Acnodes

Acnodes PC 1150 Bedienungsanleitung

AIS

AIS IP10IA99 series Bedienungsanleitung

IBASE Technology

IBASE Technology ASTUT-152-RE1S Bedienungsanleitung

YASKAWA

YASKAWA TP 610C Bedienungsanleitung

B&R

B&R Power Panel C Series Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 control Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321W-521 Bedienungsanleitung

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Bedienungsanleitung

Qomo

Qomo QIT1386 Bedienungsanleitung

DFI

DFI KS104-CD Bedienungsanleitung

AMX

AMX AXP-PPC Leitfaden

Sartorius

Sartorius X3 PR 5410 Bedienungsanleitung

AMX

AMX Modero X Series Bedienungsanleitung

B&R Industries

B&R Industries MAPPC900-ENG Bedienungsanleitung