Advantech TPC-1260H Bedienungsanleitung

TPC-1260H

Crusoe™ 5800 Touch Panel

Computer with High-Luminance

12.1” SVGA TFT LCD Display

User Manual

TPC-1260H User Manual ii

The documentation and the software included with this product are copy-

righted 2005by AdvantechCo., Ltd. All rights are reserved. Advantech

Co., Ltd. reserves the right to make improvements in the products

described in this manual at any time without notice. No part of this man-

ual may be reproduced, copied, translated or transmitted in any form or

by any means without the prior written permission of Advantech Co., Ltd.

Information provided in this manual is intended to be accurate and reli-

able. However, Advantech Co., Ltd. assumes no responsibility for its use,

nor for any infringements of the rights of third parties, which may result

from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of

Microsoft Corp.

All other product names or trademarks are properties of their respective

owners.

This Manual Covers the Following Models

• TPC-1260H-A1

• TPC-1260H-A5

• TPC-1260H-D1

• TPC-1260H-D5

• TPC-1260HN-A1

• TPC-1260HN-A5

• TPC-1260HX-A1

• TPC-1260HX-A5

Part No. 2003126002 1st Edition

PrintedinTaiwanJuly 2005

iii

Product Warranty (1 year)

Advantech warrants to you, the original purchaser, that each of its prod-

ucts will be free from defects in materials and workmanship for one year

from the date of purchase.

This warranty does not apply to any products which have been repaired or

altered by persons other than repair personnel authorized by Advantech,

or which have been subject to misuse, abuse, accident or improper instal-

lation. Advantech assumes no liability under the terms of this warranty as

a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous test-

ing, most of our customers never need to use our repair service. If an

Advantech product is defective, it will be repaired or replaced at no

charge during the warranty period. For out-of-warranty repairs, you will

be billed according to the cost of replacement materials, service time and

freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For

example, CPU speed, Advantech products used, other hardware

and software used, etc.) Note anything abnormal and list any

onscreen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your man-

ual, product, and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return

merchandize authorization) number from your dealer. This allows

us to process your return more quickly.

4. Carefully pack the defective product, a fully-completed Repair and

Replacement Order Card and a photocopy proof of purchase date

(such as your sales receipt) in a shippable container. A product

returned without proof of the purchase date is not eligible for war-

ranty service.

5. Write the RMA number visibly on the outside of the package and

ship it prepaid to your dealer.

TPC-1260H User Manual iv

This product has passed the CE test for environmental specifications

when shielded cables are used for external wiring. We recommend the use

of shielded cables. This kind of cable is available from Advantech. Please

contact your local supplier for ordering information.

FCC Class A

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interfer-

ence when the equipment is operated in a commercial environment. This

equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interference at his own

expense.

Technical Support and Assistance

Step 1. Visit the Advantech web site at www.advantech.com/support

where you can find the latest information about the product.

Step 2. Contact your distributor, sales representative, or Advantech's cus-

tomer service center for technical support if you need additional

assistance. Please have the following information ready before

you call:

- Product name and serial number

- Description of your peripheral attachments

- Description of your software (operating system, version, appli-

cation software, etc.)

- A complete description of the problem

- The exact wording of any error messages

Packing List

Before setting up the system, check that the items listed below are

included and in good condition. If any item does not accord with the

table, please contact your dealer immediately.

• 1 x TPC-1260H-A1,or

TPC-1260H-A5, or

TPC-1260H-D1, or

TPC-1260H-D5, or

TPC-1260HN-A1, or

TPC-1260HN-A5, or

TPC-1260HX-A1, or

TPC-1260HX-A5

• 8 x Panel mounting clampers

• 8 x Panel mounting screws

• 1 x 3-Pin power connector

• 1 x TPC-1260H support CD

• 1 x CompactFlash to IDE adapter board

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User's Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning.

Use a damp cloth. Do not use liquid or spray detergents for clean-

ing.

4. For plug-in equipment, the power outlet socket must be located

near the equipment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Drop-

ping it or letting it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the

equipment from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before con-

necting the equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not

place anything over the power cord.

TPC-1260H User Manual vi

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the

power source to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or elec-

trical shock.

13. Never open the equipment. For safety reasons, the equipment

should be opened only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked

by service personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well, or you cannot get it to work

according to the user's manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT

WHERE THE STORAGE TEMPERATURE MAY GO BELOW -

20° C (-4° F) OR ABOVE 60° C (140° F). THIS COULD DAM-

AGE THE EQUIPMENT. THE EQUIPMENT SHOULD BE IN A

CONTROLLED ENVIRONMENT.

16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS

INCORRECTLY REPLACED. REPLACE ONLY WITH THE

SAME OR EQUIVALENT TYPE RECOMMENDED BY THE

MANUFACTURER, DISCARD USED BATTERIES ACCORD-

ING TO THE MANUFACTURER'S INSTRUCTIONS.

The sound pressure level at the operator's position according to IEC 704-

1:1982 is no more than 70 dB (A).

DISCLAIMER: This set of instructions is given according to IEC 704-1.

Advantech disclaims all responsibility for the accuracy of any statements

contained herein.

vii

Wichtige Sicherheishinweise

1. 1. Bitte lesen sie Sich diese Hinweise sorgfältig durch.

2. Heben Sie diese Anleitung für den späteren Gebrauch auf.

3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Ver-

wenden Sie Keine Flüssig-oder Aerosolreiniger. Am besten dient

ein angefeuchtetes Tuch zur Reinigung.

4. Die NetzanschluBsteckdose soll nahe dem Gerät angebracht und

leicht zugänglich sein.

5. Das Gerät ist vor Feuchtigkeit zu schützen.

6. Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten.

Ein Kippen oder Fallen könnte Verletzungen hervorrufen.

7. Die Belüftungsöffnungen dienen zur Luftzirkulation die das Gerät

vor überhitzung schützt. Sorgen Sie dafür, daB diese Öffnungen

nicht abgedeckt werden.

8. Beachten Sie beim. AnschluB an das Stromnetz die AnschluBw-

erte.

9. Verlegen Sie die NetzanschluBleitung so, daB niemand darüber

fallen kann. Es sollte auch nichts auf der Leitung abgestellt werden.

10. Alle Hinweise und Warnungen die sich am Geräten befinden sind

zu beachten.

11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten

Sie es vom Stromnetz trennen. Somit wird im Falle einer Überspan-

nung eine Beschädigung vermieden.

12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder

Flüssigkeiten in das Gerät gelangen. Dies könnte einen Brand bzw.

elektrischen Schlag auslösen.

13. Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen der ele-

ktrischen Sicherheit nur von authorisiertem Servicepersonal geöff-

net werden.

14. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz

zu trennen und von einer qualifizierten Servicestelle zu überprüfen:

a - Netzkabel oder Netzstecker sind beschädigt.

b - Flüssigkeit ist in das Gerät eingedrungen.

c - Das Gerät war Feuchtigkeit ausgesetzt.

TPC-1260H User Manual viii

d - Wenn das Gerät nicht der Bedienungsanleitung entsprechend funk-

tioniert oder Sie mit Hilfe dieser Anleitung keine Verbesserung erz-

ielen.

e - Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt.

f - Wenn das Gerät deutliche Anzeichen eines Defektes aufweist.

15. VOSICHT: Explisionsgefahr bei unsachgemaben Austausch der

Batterie.Ersatz nur durch densellben order einem vom Hersteller

empfohlene-mahnlichen Typ. Entsorgung gebrauchter Batterien

navh Angaben des Herstellers.

16. ACHTUNG: Es besteht die Explosionsgefahr, falls die Batterie auf

nicht fach-männische Weise gewechselt wird. Verfangen Sie die

Batterie nur gleicher oder entsprechender Type, wie vom Hersteller

empfohlen. Entsorgen Sie Batterien nach Anweisung des Herstell-

ers.

Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000

beträgt 70dB(A) oder weiger.

Haftungsausschluss: Die Bedienungsanleitungen wurden entsprechend

der IEC-704-1 erstellt. Advantech lehnt jegliche Verantwortung für die

Richtigkeit der in diesem Zusammenhang getätigten Aussagen ab.

Contents

Chapter 1 General Information ....................................... 2

1.1 Introduction ....................................................................... 2

1.2 Specifications .................................................................... 3

1.2.1 System Kernel ................................................................ 3

1.2.2 I/O Ports ......................................................................... 3

1.2.3 Safety and Environment ................................................. 4

1.3 LCD Specifications ........................................................... 4

1.4 Touchscreen Specifications............................................... 5

1.5 Power................................................................................. 5

1.6 I/O Ports Arrangement ...................................................... 5

Figure 1.1:I/O Ports Arrangement ................................. 5

1.7 Panel Mounting ................................................................. 6

Figure 1.2:Panel Mounting ............................................ 6

1.8 Dimensions and Cutout ..................................................... 7

Figure 1.3:Dimensions ................................................... 7

Chapter 2 System Setup.................................................. 10

Figure 2.1:Unpack the Package ................................... 10

Figure 2.2:Install CompactFlash Memory Card .......... 11

Figure 2.3:Power Connector and Power Lines ............ 11

Figure 2.4:Pin Assignments on the Power Receptor and

Power Button ................................................... 12

Figure 2.5:Touch Screen Calibration-1 ....................... 13

Figure 2.6:Touch Screen Calibration-2 ....................... 13

Chapter 3 System Engine................................................ 16

Chapter 4 Windows CE .................................................. 18

Figure 4.1:Windows CE for TPC-1260H .................... 18

4.1 TPC Utilities.................................................................... 19

4.1.1 Soft-Keyboard .............................................................. 19

Figure 4.2:Soft-Keyboard ............................................ 19

4.1.2 LCD Display Tuning ................................................... 19

Figure 4.3:Display ....................................................... 20

Figure 4.4:Display Properties ...................................... 20

Figure 4.5:Advanced Backlight Utility ........................ 21

4.1.3 TPC Configurator ........................................................ 21

Figure 4.6:TPC Configurator ....................................... 21

Figure 4.7:General ....................................................... 22

Figure 4.8:Network Utility .......................................... 22

Figure 4.9:Advanced Network ..................................... 23

Figure 4.10:WatchDog Timer Setting ......................... 23

Figure 4.11:Misc Page ................................................. 24

Figure 4.12:Reboot ..................................................... 25

TPC-1260H User Manual x

Figure 4.13:Successful Registry Saving ...................... 25

Figure 4.14:Registry Editor ......................................... 26

Figure 4.15:Registry Backup ....................................... 26

Figure 4.16:Registry Restore ....................................... 27

4.1.4 Advantech Tools ........................................................ 28

Figure 4.17:Advantech Tools ...................................... 28

Figure 4.18:Touch Screen Calibration ......................... 28

Figure 4.19:Touch Screen Calibration Utility ............. 29

Figure 4.20:Remote Display Host Application ............ 30

Figure 4.21:Remote Display Application .................... 30

Figure 4.22:Connect ..................................................... 31

Figure 4.23:Remote Display Host Application with the

display of TPC-1260H ..................................... 31

Figure 4.24:TPC CE Notepad ...................................... 32

Figure 4.25:TPC Version Information ......................... 32

4.2 Networking...................................................................... 33

4.2.1 Network via Ethernet ................................................... 33

Figure 4.26:Network and Dial-up Connections ........... 33

Figure 4.27:Selected Connection ................................. 33

Figure 4.28:Setting IP Address .................................... 34

Figure 4.29:Setting Name Servers ............................... 34

Figure 4.30:Save Registry ............................................ 34

4.2.2 Network via Serial Port ................................................ 35

Figure 4.31:Set PC Connections .................................. 35

Figure 4.32:Change Connection .................................. 35

Figure 4.33:Save Registry ............................................ 36

Figure 4.34:Microsoft ActiveSync .............................. 36

Figure 4.35:Select Connection Setting ........................ 36

Figure 4.36:Configure Connection Setting .................. 37

Figure 4.37:Get Connected .......................................... 37

Figure 4.38:Run Repllog.exe on the TPC .................... 38

Figure 4.39:Connection on the TPC ............................ 38

Figure 4.40:Connection on the Host PC ...................... 38

Figure 4.41:Exploring the TPC .................................... 39

4.3 Application Program Development................................. 39

4.3.1 System Requirements for Developers .......................... 39

4.3.2 Building Windows CE .NET Runtime ........................ 40

Figure 4.42:Starting a New Project .............................. 41

Figure 4.43:Selecting ................................................... 42

Figure 4.44:Compiling your Program .......................... 42

Appendix A Serial Port Settings........................................ 44

A.1 Jumper Settings ............................................................... 44

A.2 Software Setting .............................................................. 44

Figure A.1:Device Manager ........................................ 45

Figure A.2:COM5 Properties ....................................... 45

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Advantech Touchscreen Handbücher

Advantech

Advantech ITA-8100 Bedienungsanleitung

Advantech

Advantech PPC-3211SW Installations- und Betriebshandbuch

Advantech

Advantech TPC-1260 Bedienungsanleitung

Advantech

Advantech PPC-306 EHL Installations- und Betriebshandbuch

Advantech

Advantech PPC-306 EHL Bedienungsanleitung

Advantech

Advantech PPC-6151C Bedienungsanleitung

Advantech

Advantech PPC-612 Installations- und Betriebshandbuch

Advantech

Advantech PPC-3100-RE9A Bedienungsanleitung

Advantech

Advantech PPC-3151-650AE Installations- und Betriebshandbuch

Advantech

Advantech TPC-1581WP Bedienungsanleitung

Advantech

Advantech UltraSlim PPC-S153 Bedienungsanleitung

Advantech

Advantech PPC-L127T Bedienungsanleitung

Advantech

Advantech UTC-W101E Bedienungsanleitung

Advantech

Advantech IPPC-7157 Series Bedienungsanleitung

Advantech

Advantech PPC-6151C Bedienungsanleitung

Advantech

Advantech ProFlat IDP31-156WP45HIB1 Bedienungsanleitung

Advantech

Advantech PPC-150 Series Bedienungsanleitung

Advantech

Advantech PPC-3151W Installations- und Betriebshandbuch

Advantech

Advantech PPC-L61T Bedienungsanleitung

Advantech

Advantech PPC-S123 Bedienungsanleitung

Advantech

Advantech TPC-1260G Bedienungsanleitung

Advantech

Advantech PPC-3210SW Bedienungsanleitung

Advantech

Advantech TPC-B300 Series Bedienungsanleitung

Advantech

Advantech PPC-6120 Bedienungsanleitung

Beliebte Touchscreen Handbücher anderer Marken

FlowLine

FlowLine Data loop Bedienungsanleitung

ALPEX

ALPEX AEx-8 P Series Bedienungsanleitung

Ltech

Ltech E5S Bedienungsanleitung

Harman

Harman AMX MODERO S MSD-701-L2 Bedienungsanleitung

Acnodes

Acnodes PC 1150 Bedienungsanleitung

AIS

AIS IP10IA99 series Bedienungsanleitung

IBASE Technology

IBASE Technology ASTUT-152-RE1S Bedienungsanleitung

YASKAWA

YASKAWA TP 610C Bedienungsanleitung

B&R

B&R Power Panel C Series Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 control Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321W-521 Bedienungsanleitung

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Bedienungsanleitung

Qomo

Qomo QIT1386 Bedienungsanleitung

DFI

DFI KS104-CD Bedienungsanleitung

AMX

AMX AXP-PPC Leitfaden

Sartorius

Sartorius X3 PR 5410 Bedienungsanleitung

AMX

AMX Modero X Series Bedienungsanleitung

B&R Industries

B&R Industries MAPPC900-ENG Bedienungsanleitung