Advantech MT-100 Bedienungsanleitung

1/61 MT-100 Tablet PC User Manual

Tablet-PC

AMD LX800® M processor-based

Point of Care Terminal with 10.4” TFT

LCD

User’s Manual

2/61 MT-100 Tablet PC User Manual

FCC Class B

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference when

the equipment is operated in a residential environment. This equipment generates, uses and

can radiate radio frequency energy. If not installed and used in accordance with this user's

manual, it may cause harmful interference to radio communications.

Note that even when this equipment is installed and used in accordance with this user's

manual, there is still no guarantee that interference will not occur. If this equipment is believed

to be causing harmful interference to radio or television reception, this can be determined by

turning the equipment on and off. If interference is occurring, the user is encouraged to try to

correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment and the receiver

Connect the equipment to a power outlet on a circuit different from that to which the

receiver is connected

Consult the dealer or an experienced radio/TV technician for help

Warning Any changes or modifications made to the equipment which are not expressly

approved by the relevant standards authority could void your authority to operate

the equipment.

Caution Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the

manufacturer. Dispose of used batteries according to the manufacturer’s

instructions.

Packing List

Before installing your Point of Care Terminal, ensure that the following materials have been

received:

Tablet PC series Point of Care Terminal

Accessories for Tablet-PC

-- AC Adapter x1

-- Battery Pack x1 + screws for Battery

-- User's manual & "Drivers and Utilities" in CD-ROM disc

-- Touch Pen x1

Figure 1.0 MT-100 and Accessories

Warning To prevent electric shock, Do not remove cover.

No user serviceable parts inside, refer servicing to qualified personnel.

3/61 MT-100 Tablet PC User Manual

Additional Information and Assistance

1. Visit the Advantech websites at www.advantech.com or www.advantech.com.tw where

you can find the latest information about the product.

2. Contact your distributor, sales representative, or Advantech's customer service center for

technical support if you need additional assistance. Please have the following information

ready before you call:

Product name and serial number

Description of your peripheral attachments

Description of your software (operating system, version, application software, etc.)

A complete description of the problem

The exact wording of any error messages

This equipment is a source of electromagnetic waves. Before use please, make sure that

there are not EMI sensitive devices in its surrounding which may malfunction

therefore.

Warning 1. Input voltage rated 100-240 VAC, 47-63 Hz, 1.25-0.5A (AC Adapter), Output

Voltage rated 15VDC , max 6.6A

2. Use a 3V @ 195 mA lithium battery (Model No. BR2032)

3. Packing: please carry the unit with both hands, handle with care

4. Our European representative:

Advantech Europe GmbH

Kolberger Straße 7

D-40599 Düsseldorf, Germany

Tel: 49-211-97477350

Fax: 49-211-97477300

5. Maintenance: to properly maintain and clean the surfaces, use only approved

products or clean with a dry applicator

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User's Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not

use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the equipment and

must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall may

cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment from

overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the equipment to

the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything over the

power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source to avoid

damage by transient over voltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be opened only by

qualified service personnel.

14. If one of the following situations arises, get the equipment checked by service personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well, or you cannot get it to work according to the user's

manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED ENVIRONMENT WHERE

THE STORAGE TEMPERATURE IS BELOW -20° C (-4° F) OR ABOVE 60° C (140° F). THIS

MAY DAMAGE THE EQUIPMENT.

4/61 MT-100 Tablet PC User Manual

16. If your computer is losing dramatic time or the BIOS configuration reset to default, the

battery has no power.

Caution 1. Do not replace battery yourself. Please contact a qualified technician or your

retail.

2 .The computer is provided with a battery-powered real-time clock circuit. There

is a danger of explosion if battery is incorrectly replaced. Replace only with same

or equivalent type recommended by the manufacture. Discard used batteries

according to the manufacturer’s instructions

17. IMPROPER INSTALLATION OF VESA MOUNTING CAN RESULT IN SERIOUS

PERSONAL INJURY! VESA mount installation should be operated by professional technician,

please contact the service technician or your retail if you need this service.

18. CLASSIFICATION:

Supply Class I adapter

No applied part

IPX0

Continuous Operation

Not AP or APG category

19. Disconnect device: Appliance inlet.

20. Follow the national requirement to dispose unit.

21. Maintenance: to properly maintain and clean the surfaces, use only the approved

products or clean with a dry applicator.

22. Contact information:

No.1, Alley 20, Lane 26, Reuiguang Road Neihu District, Taipei,

Taiwan 114, R.O.C.

TEL: +886 2-27927818

23.

24. This equipment shall not be used for life support system.

25. Accessory equipment connected to the analog and digital interfaces must be in

compliance with the respective nationally harmonized IEC standards (i.e. IEC 60950 for data

processing equipment, IEC 60065 for video equipment, IEC 61010-1 for laboratory equipment,

and IEC 60601-1 for medical equipment.) Furthermore all configurations shall comply with the

system standard IEC 60601-1-1. Everybody who connects additional equipment to the signal

input part or signal output part configures a medical system, and is therefore, responsible that

the system complies with the requirements of the system standard IEC 60601-1-1. The unit is

for exclusive interconnection with IEC 60601-1 certified equipment in the patient environment

and IEC 60XXX certified equipment outside of the patient environment. If in doubt, consult the

technical services department or your local representative.

26. User not to contact SIP/SOPs and the patient at the same time.

27. The sound pressure level at the operator's position according to IEC 704-1:1982 is no

more than 70dB (A).

DISCLAIMER This set of instructions is given according to IEC 704-1. Advantech disclaims

all responsibility for the accuracy of any statements contained herein

5/61 MT-100 Tablet PC User Manual

Explanation Of Graphical Symbols:

This symbol warns user that uninsulated voltage within the unit may have sufficient

magnitude to cause electric shock. Therefore, it is dangerous to make any kind of

contact with any part inside this unit.

This symbol alerts the user that important literature concerning the operation and

maintenance of this unit has been included. Therefore, it should be read carefully in

order to avoid any problems.

Stand-by

Direct Current

6/61 MT-100 Tablet PC User Manual

Chapter 1General Information

1.0Introduction

The Tablet PC is a multimedia AMD® Mobile processor-based computer that is designed to

serve as a Point of Care terminal (POC.) It is a PC-based system with 10.4" color TFT LCD

display and 18-bit stereo audio controller. Tablet PC is a mobile point of care for system

integrators, this simple, complete and highly integrated multimedia system lets you easily

build a Point of Care Terminal into your applications. Common industrial applications include

factory automation systems, precision machinery, and production process control. It is also

suitable for many non-industrial applications, including interactive kiosk systems,

entertainment management, and car park automation. The Tablet PC is a reliable, cost-

effective solution to your application's processing requirements.

1.1 Specifications

MT-100 Description

OS MS XP SP2, XP Embedded

Dimension （W×D×H） 266.4 x 211.4 x 36 mm (10.49” x 8.32” x 1.42”)

Weight 2.0 kg

Panel 10.4" SVGA or XGA TFT

Touch Panel Resister touch

CPU AMD LX800 500MHz

L2 cache 128K

Chipset AMD LX800/ CS6635

BIOS Award 512 KB Flash BIOS, supports Plug & Play, APM

CMOS Battery (BIOS) 3.0 V @ 195 mA lithium battery

DRAM 512MB/1GB DDR333 (One memory module support)

Graphic

AMD LX800 with share memory

Supports LVDS LCD panel resolutions up to 1024 x 768

Simultaneously supports CRT

Storage 1.8" IDE HDD

CF memory Option (trade off with HDD)

Wireless Internal mini-PCI 802.11b/g WLAN

Communication Bluetooth Option

Keypad 5x function key

USB USB2.0 x 2

Power switch Yes

DC-in Yes

I/O

Cradle Docking

AC97 Audio I/F

Audio Integrated speakerx1, Microphone x1

Battery

Model: MT-BATE

Removable 11.1V@4800mAh Li-ion battery pack

support warm swappable

Alarm 10% Low battery

6% Critical low

Discharge Time 3 hours battery life

Power

Charging Time 3.5 hours

7/61 MT-100 Tablet PC User Manual

Adapter

Model: MPU100-106

Auto-switching 100-240VAC, 47-63Hz, 1.25-0.5A

Supplying 15VDC with a current of 6.6A

Certification : EN60601-1

Operation

Temperature 10 ~ 40°C (32 ~ 104 °F)

Storage

Temperature -20°C to 60°C

Relative humidity

10 °C to 40 °C / 20% RH to 90% RH operating

-20 °C to 50 °C/ 10% RH to 95% RH Storage ( Non-

condensing )

Storage Humidity 0% to 95% non-condensing

Drop 3 Foot height free drop still survive, (test surface:

concrete, base unit only)

Shock 10G, half sine, 11 msec duration

Vibration 0.047 double amplitude displacement ( 5~32Hz)

0.5G Peak (32 -500 Hz )

Power MTBF 100,000 hrs

Altitudes Operational: 6,000 feet; Shipping : 40,000 feet

Environ-

ment

Electrostatic

Discharge (ESD)

Contact: 8Kv

Air: 15Kv

This device bears the CE label in accordance with the provisions of the EMC

Directive 89/336/EMC and the Low Voltage Directive 73/23/EEC.

EMC CE, FCC approved

Agency

Approvals Safety UL60601-1 and EN60601-1 approved.

HDD 1.8", 40GB~120GB, 4200rpm, PATA HDD

CF 2GB/4GB/8GB, Industry (2GB support XP embedded

only)

Memory 512MB/1GB, DDR-333MHz SoDIMM

Digital camera 1.3M Camera Module

Bluetooth Yes

Option Modules

MT-CRADLE USB x4, RS-232x1, LAN x1, VGA x1, Smart card

readerx1

Table 1.1: MT-100 Tablet specification

1.2 LCD Panel Specifications

LCD model (MT-100-AE) AU G104SN03

Display type TFT color LCD

Size (Diagonal) 10.4”

Resolution 800 x 600 (VGA)

Maximum colors 262k color

Pixel pitch (mm) 0.264(H) x 0.264(V)

Horizontal viewing angle Right 60 degree, Left 60 degree (type)

Vertical viewing angle Upper 35 degree, Down 65 degree (type)

Luminance (cd/m2) 230 cd/m2 (type)

Contrast ratio 500:1

Lamp lifetime 50,000 hours at 6.5mA

Table 1.2: AU LCD Panel specification

8/61 MT-100 Tablet PC User Manual

LCD model (MT-100-TE) Toshiba LTD104KA1S

Display type TFT color LCD

Size (Diagonal) 10.4”

Resolution 1024(W) x 768(H) pixels ( XGA)

Maximum colors 256K(R,G,B 6 bit color data)

Pixel pitch (mm) 0.2055(W) x 0.2055(H)

(Upper+Lower) 50 degreeviewing

angle (Left+Right) 90 degree

Luminance (cd/m2) 170 cd/m2

Contrast ratio 250:1

Lamp lifetime 50,000 hours at 6.5mA

Table 1.3: Toshiba LCD Panel specification

1.3 Touchscreen Specifications

Type Analog Resistive

Resolution Continuous

Light Transmission 75%

Controller USB interface

Power

Consumption

+5V@100 mA

Software Driver Supports Windows® XP Professional, Windows® XP Tablet Edition

compatible.

Durability (touches

in a lifetime)

30 million

Table 1.4: Touch screen specification

Note The Point of Care Terminal with the optionally installed touchscreen will share

USB. Once the touch screen is installed, one USB cannot be used for other

purposes.

Cleaning/Disinfecting

During normal use of the Tablet PC may become soiled and should, therefore, be cleaned

regularly. Agents: Green tinctured soap and Enzymatic detergents

Steps:

1. Wipe the Tablet PC with a clean cloth that has been moistened in the cleaning solution.

2. Prepare agent per manufacturer’s instructions or hospital protocol.

3. Wipe thoroughly with a clean cloth

Cautions Do not immerse or rinse the Tablet PC and its peripherals. If you accidentally

spill liquid on the device, disconnect the unit from the power source. Contact

your Biomed regarding the continued safety of the unit before placing it back in

operation.

Do not spray cleaning agent on the chassis.

Do not use disinfectants that contain phenol.

Do not autoclave or clean the MT-100 or its peripherals with strong aromatic,

chlorinated, ketone, ether, or Esther solvents, sharp tools or abrasives. Never

immerse electrical connectors in water or other liquids.

9/61 MT-100 Tablet PC User Manual

1.4 MT-CRADLE Specifications

MT-CRADLE Description

Dimension （W×D×H） 217.4 x 156.8 x 42.4 mm (8.56” x 6.17” x 1.67”)

Weight 800g

USB USB2.0 x 4

COM RS-232 x 1

LAN Giga Bit Ethernet x1

VGA VGA output port x1

DC-in Yes

Cradle Ports Docking

I/O

Smart Card reader Yes

Adapter

Model: MPU100-106

Auto-switching 100-240VAC, 47-63Hz, 1.25-0.5A

Supplying 15VDC with a current of 6.6A

Certification : EN60601-1

Operation

Temperature 0 ~ 40°C (32 ~ 104 °F)

Storage

Temperature -20°C to 60°C

Relative humidity

10 °C to 40 °C / 20% RH to 90% RH operating

-20 °C to 50 °C/ 10% RH to 95% RH Storage ( Non-

condensing )

Storage Humidity 0% to 95% non-condensing

Drop 3 Foot height free drop still survive, (test surface:

concrete, base unit only)

Shock 10G, half sine, 11 msec duration

Vibration 0.047 double amplitude displacement ( 5~32Hz)

0.5G Peak (32 -500 Hz )

Power MTBF 100,000 hrs

Altitudes Operational: 6,000 feet; Shipping : 40,000 feet

Environ-

ment

Electrostatic

Discharge (ESD)

Contact: 8Kv

Air: 15Kv

This device bears the CE label in accordance with the provisions of the EMC

Directive 89/336/EMC and the Low Voltage Directive 73/23/EEC.

EMC CE, FCC approved

Agency

Approvals Safety UL60601-1 and EN60601-1 approved.

Table 1.5: MT-CRADLE specification

10/61 MT-100 Tablet PC User Manual

1.5 Dimensions

Dimensions :266.4 x 211.4 x 36 mm ; VESA mount 75 x75mm

Figure 1-1: Dimensions of the Tablet PC

Dimensions : 217.4 x 156.8 x 42.4 mm ; VESA mount 75 x75 mm

Figure 1-2: Dimensions of the CRADLE (Optional)

Inhaltsverzeichnis

Andere Advantech Touch-Terminal Handbücher

Advantech

Advantech POC127 Bedienungsanleitung

Advantech

Advantech WP-5530-PD10 Bedienungsanleitung

Advantech

Advantech POC-195 Bedienungsanleitung

Advantech

Advantech EP-55XX-AR10 Bedienungsanleitung

Advantech

Advantech POC-W152 Bedienungsanleitung

Advantech

Advantech HIT-W101C Gebrauchsanweisung

Advantech

Advantech ADAM-3952/PMA Bedienungsanleitung

Advantech

Advantech UbiQ-480 Bedienungsanleitung

Advantech

Advantech POC-W213L Series Bedienungsanleitung

Advantech

Advantech TREK-722 Bedienungsanleitung

Advantech

Advantech WP-75**-**10/40 Bedienungsanleitung

Advantech

Advantech USC-360 Installations- und Betriebshandbuch

Advantech

Advantech PPC-V106 Bedienungsanleitung

Advantech

Advantech MARS-1030F Bedienungsanleitung

Advantech

Advantech POC-WP21 Series Bedienungsanleitung

Advantech

Advantech ProFlat IDP31-190-P35HIB1E Bedienungsanleitung

Advantech

Advantech TPC-1240 Bedienungsanleitung

Advantech

Advantech UPOS-3150 Bedienungsanleitung

Advantech

Advantech POS-560-B1 Bedienungsanleitung

Advantech

Advantech TREK-773 Bedienungsanleitung

Advantech

Advantech POC-155 Bedienungsanleitung

Advantech

Advantech TREK-723 Bedienungsanleitung

Advantech

Advantech ADAM-3968M/PMA Installations- und Betriebshandbuch

Advantech

Advantech TREK-733L Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung