Advantech WLAN-9100 Bedienungsanleitung

N-

-9

•

Date of Issue: Jan.1. 2001

This document is copyrighted, 2001, by Advantech Co., Ltd. All rights are reserved. Advantech

Co., Ltd., reserves the right to make improvements to the products described in this manual at

any time without notice.

No part of this manual may be reproduced, copied, translated or transmitted in any form or by

any means without the prior written permission of Advantech Co., Ltd. Information provided in

this manual is intended to be accurate and reliable. However, Advantech Co., Ltd. assumes no

responsibility for its use, nor for any infringements upon the rights of third parties which may

result from its use.

Acknowledgments

ADAM is a trademark of Advantech Co., Ltd. IBM and PC are trademarks of International

Business Machines Corporation.

CE Notification

The WLAN-9100 has passed the CE test for environmental specifications. Test conditions for

passing included the equipment being operated within an industrial enclosure. In order to protect

the WLAN-9100 system from being damaged by ESD (Electrostatic Discharge) and EMI

leakage, we strongly recommend the use of CE-compliant industrial enclosure products.

FCC Information

This equipment has been tested and found to comply with the limits for a Class A digital devices

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful interference to radio

communication.

Operation of this equipment in residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at this own expense.

The user should not modify or change this equipment without written approval from company

name. Modification could void authority to use this equipment.

For the safety reason, people should not work in a situation which RF Exposure limits be

exceeded. To prevent the situation happening, people who work with the antenna should be

aware of the following rules:

1. Install the antenna in a location where a distance of 20 cm from the antenna may be

maintained.

2. While installing the antenna in the location, please do not turn on the power of wireless card.

3. While the device is working, please do not contact the antenna.

Advantech Customer Services

Each and every Advantech product is built to the most exacting specifications to ensure reliable

performance in the unusual and demanding conditions typical of industrial environments.

Whether your new Advantech equipment is destined for the laboratory or the factory floor, you

can be assured that your product will provide the reliability and ease of operation for which the

name Advantech has come to be known. Your satisfaction is our number one concern. Here is a

guide to Advantech’s customer services. To ensure you get the full benefit of our services, please

follow the instructions below carefully.

Technical Support

We want you to get the maximum performance from your products. So if you run into technical

difficulties, we are here to help. For most frequently asked questions you can easily find answers

in your product documentation. These answers are normally a lot more detailed than the ones we

can give over the phone. Please consult this manual first. If you still cannot find the answer,

gather all the information or questions that apply to your problem and, with the product close at

hand, call your dealer. Our dealers are well trained and ready to give you the support you need to

get the most from your Advantech products. In fact, most problems reported are minor and are

able to be easily solved over the phone. In addition, free technical support is available from

Advantech engineers every business day. We are always ready to give advice on application

requirements or specific information on the installation and operation of any of our products.

Product Warranty

Advantech warrants to you, the original purchaser, that each of its products will be free from

defects in materials and workmanship for two years from the date of purchase. This warranty

does not apply to any products which have been repaired or altered by other than repair

personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or

improper installation. Advantech assumes no liability as a consequence of such events under the

terms of this Warranty. Because of Advantech’s high quality-control standards and rigorous

testing, most of our customers never need to use our repair service. If an Advantech product ever

does prove defective, it will be repaired or replaced at no charge during the warranty period. For

out-of-warranty repairs, you will be billed according to the cost of replacement materials, service

time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered (e.g. type of PC, CPU speed,

Advantech products used, other hardware and software used etc.). Note anything abnormal and

list any on-screen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your manual, product, and any helpful

information readily available.

3. If your product is diagnosed as defective, you have to request an RMA number. When

requesting an RMA (Return Material Authorization) number, please access ADVANTECH’s

RMA website: http:// www.advantech.com.tw/rma. If the web sever is shut down, please contact

our office directly. You should fill in the “Problem Repair Form”,describing in detail the

application environment, configuration, and problems encountered. Note that error descriptions

such as “does not work” and “failure” are so general that we are then required to apply our

internal standard repair process.

4. Carefully pack the defective product, a completely filled-out Repair and Replacement Order

Card and a photocopy of dated proof of purchase (such as your sales receipt) in a shippable

container. A product returned without dated proof of purchase is not eligible for warranty

service.

5. Write the RMA number visibly on the outside of the package and ship it prepaid to your

dealer.

Table of Contents

Chapter 1 Introduction.................................................................... 1

1-1 Features and Benefits ................................................................................ 1

1-2 Specifications .........................................Bł



d! Nie zdefiniowano zakładki.

1-3 System Configurations ............................................................................... 3

Chapter 2 Hardware Installation.................................................... 4

2-1 Product Kit ................................................................................................ 4

2-2 System Requirements ................................................................................. 4

2-3 Mechanical Description............................................................................. 5

2-4 Hardware Installation ............................................................................... 6

Chapter 3 Configuring the Access Point............................................ 8

3-1 Using the Access Point Manager ............................................................... 8

3-2 Using the Web Management .................................................................. 199

3-3 Using the Console Mode........................................................................ 233

Chapter 4Troubleshooting............................................................. 333

Appendix A Network Configuration.............................................. 355

Appendix B Glossary......................................................................... 399

-1-

Chapter 1 Introduction

The WLAN-9100 is an efficient bridge between wired and wireless local area networks. It

brings with it the advantage of network expandability and mobility for users. The

WLAN-9100 is fully compliant with the IEEE 802.11(b) 11Mbps Wireless LAN standard,

and features powerful functions such as: high-security WEP40 protection, a self-diagnostic

configuration utility, Web management, SNMP and more. The WLAN-9100 is especially

suitable for difficult-to-wire environments and mobile workers.

If placed anywhere along a LAN, the WLAN-9100 allows wireless stations to access

transparently the corporate network.. By detecting WLAN-9100s automatically, wireless

LAN devices can roam different areas so long as they are configured correctly. In addition,

the WLAN-9100 also provides WEP40 standard and MAC Access Control for transmission

security. This makes it suitable for high-security network. We also provide four convenient

methods to configure WLAN-9100: Web management, telnet, configuration utility, RS-232.

You can configure it via Internet remotely. For further protecting transmission security,

WLAN-9100 adapts MAC access control to limit the specific wireless LAN devices to join

the network.

1.1 Features and Benefits

• 11Mbps data rate by incorporating Direct Sequence Spread Spectrum technology.

• Fully IEEE 802.11b compatible. Allow inter-operation among multiple vendors.

• Seamless roaming within the 802.11 & 802.11b wireless LAN infrastructure.

• User authentication to enforce tight security.

• MAC address control.

• Supports WEP40 security standard.

• Highly efficient antenna provides a range of operation up to 800 feet in free space.

• Easy end-user installation, just plug and play

• Windows-based configuration utilities.

• Windows-based Diagnostic, Statistics Tools and Traffic Monitor.

• Tight design with light weight, compact size, and low power consumption.

-2-



1.2 Specifications

Product WLAN-9100 Wireless LAN Access Point

Wired Interface 10/100 base T (RJ-45)

Serial Port DB9 RS-232 (configuration port)

Wireless Interface 11Mbps Wireless LAN

Modulation DSSS (CCK, DQPSK, DBPSK)

Operation Frequency N. America/FCC: 2412~2.462 GHz (11 channels )

Europe CE/ETSI: 2.412~2.472 GHz (13 channels)

Japan: 2.412~2.484 GHz (14 channels)

France: 2.457~2.472 GHz (4 channels)

Spain: 2.457~2.462 GHz (2 channels)

Speed Options 11M/5.5M/2M/1M, also support Auto Rate Selections

RF Technology Direct Sequence Spread Spectrum

Power Supply DC 12V (External power supply included)

RF Output Power 13 dBm

Sensitivity -84dBm @ 11Mbps, PER < 8* 10-2

Antenna Integrated dipole antenna

-3-

1-3 System Configurations

The WLAN-9100 Wireless Access Point can be configured in a variety of network system

configurations.

Wireless Infrastructure

In a wireless infrastructure, the WLAN-9100 acts as a bridge. The Access Point connects the

wireless clients together. The WLAN-9100 Access Point acts as a center point for all

wireless communications. This would increase efficiency of the communications since the

wireless adapters do not need to be within direct range of each other.

Wireless Infrastructure with Stations Attaching to a Wired LAN

The WLAN-9100 Wireless LAN Access Point will provide access to a your local LAN. An

integrated wireless and wired LAN is called an Infrastructure configuration. A group of

wireless LAN PC users and an Access Point construct a Basic Service Set (BSS). Each

wireless PC in this BSS can talk to any computer on your network via the Access Point.

-4-

Chapter 2 Hardware Installation

This chapter describes initial setup of the WLAN-9100.

2-1 Product Kit

Before installation, make sure that you the following items:



The WLAN-9100 Wireless LAN Access Point……………………………………x 1



Quick Start Guide ……………………………….…………………………...x 1



Power Adapter……………………………………………..………………….x 1



Product CD (or Floppy Disk)………….. ……………………………………x 1

If any of the above items are not included or damaged, please contact your local dealer for

support.

2-2 System Requirements

Installation of the WLAN-9100 Wireless LAN Access Point requires:

1. An AC power outlet (100~240V, 50~60Hz) which supplies the power for the Access

Point.

2. A 10/100 Base-T (UTP) Ethernet cable drop.

Note: (Only if you want to re-configure the WLAN-9100 Wireless LAN Access Point instead

of using factory default configuration…) A PC with an available RS-232C port runs the

configuration program.

Inhaltsverzeichnis

Andere Advantech Drahtloser Zugangspunkt Handbücher

Advantech

Advantech IEEE 802.11a/n Wireless Access Point/ Client... Bedienungsanleitung

Advantech

Advantech EKI-6340 Series Bedienungsanleitung

Advantech

Advantech EKI-6333AC-2G Series Bedienungsanleitung

Advantech

Advantech EKI-6333AC-2GD Series Bedienungsanleitung

Advantech

Advantech EKI-6333AC-4GP Bedienungsanleitung

Advantech

Advantech EKI-6311G Bedienungsanleitung

Advantech

Advantech EKI-6333AC-M12 Series Bedienungsanleitung

Advantech

Advantech EKI-6333AC-A Series Bedienungsanleitung

Advantech

Advantech EKI-6321AG Bedienungsanleitung

Advantech

Advantech OW-1000A Bedienungsanleitung

Advantech

Advantech BB-APXN-Q5420 Bedienungsanleitung

Advantech

Advantech EKI-6311GN Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung