1ENGLISH
WARNING:
Avoid direct eye exposure. The laser beam can cause severe eye damage and/or blindness.
Do not stare into the laser beam or direct it towards other people unnecessarily.
Caution! The laser emitting product may be behind you in some applications. Be careful when facing the
product.
WARNING:
Do not operate the laser around children or allow children to operate the laser.
The reflective surface could reflect the beam back at the operator or other persons.
WARNING: Use of controls, adjustments, or the performance of procedures other than those specified in
the manual may result in hazardous radiation exposure.
When the laser is brought into a warm environment from very cold conditions, or vice versa, allow it to
come to the surrounding temperature before use.
Always store the cross laser indoors, avoid substantial knocks, continuous vibration or extreme
temperatures.
Always keep the tool away from dust, liquids and high humidity. These may damage internal components
or affect accuracy.
If laser radiation hits your eye, you must close your eyes and immediately turn your head away from the
beam.
Do not position the laser beam so that it unintentionally blinds you or others.
Do not look into a laser beam using magnifying optical devices such as binoculars or a telescope, as this
will increase the level of eye injury.
If you use laser goggles to enhance the visibility of the laser beam, please notice that they will not protect
your eyes against laser radiation.
Do not remove or deface warning labels on the laser level.
Do not disassemble the laser level, laser radiation can cause serious eye injury.
When not in use, turn offthe power, engage the pendulum lock and place the laser in its carrying pouch.
Make sure the pendulum lock mechanism is engaged before transporting the laser.
Note: If the pendulum lock mechanism is not engaged before transportation, internal mechanical damage
may occur.
Do not use aggressive cleaning agents or solutions. Use only a clean, soft cloth for cleaning.
Avoid heavy impact to or dropping of the laser. The accuracy of the laser should be checked before use if it
has been dropped or subjected to other mechanical stresses.
Any repair required on this laser product should be performed only by authorised service personnel.
Do not operate the product in explosion hazardous areas or in aggressive environments.
If the laser level is not in use for a long period of time, remove the batteries from the battery compartment.
This will prevent batteries from leaking and corrosion damage.
Flat batteries must not be disposed of with household waste. Care for the environment and take
them to the collection points provided in accordance with national or local regulations. The laser
must not be disposed with household waste. Dispose of the product appropriately in accordance
with the national regulations in force in your country. Adhere to the national and country specific
regulations. Please contact your local authority or your dealer for how to dispose of batteries properly.
European Conformity Mark
I
mportant safety instructions.......................................................................................................1
Maintenance...............................................................................................................................2
Technical data.............................................................................................................................2
Specific conditions of use...........................................................................................................2
Overview.....................................................................................................................................3
Low battery indication.................................................................................................................4
Change batteries ........................................................................................................................4
Adjustable legs ...........................................................................................................................5
Magnetic wall mount & green target plate ..................................................................................5
Working in self-leveling mode.....................................................................................................6
Working in manual mode............................................................................................................7
Plumb function............................................................................................................................8
Pulse mode function...................................................................................................................8
Accuracy check ..........................................................................................................................9
CONTENTS
I
MPORTANT SAFETY INSTRUCTIONS
CAUTION! WARNING! DANGER!
Do not use the product before you have studied the Safety instructions and the User Manual.
Laser Classification
Laser Beam
outlet aperture
WARNING:
It is a Class 2 laser product in accordance
with EN60825-1:2014 .
LASER
2
