AEM LSA150-001 Konfigurationshandbuch
LSA150-001 Loudspeaker Amplifier
ASM-LSA400 Installation and Operation Manual Supplement
July 16, 2018 Rev: 1.00 Page 1
ENG-FORM: 810-0100.DOTX
CONFIDENTIAL AND PROPRIETARY TO ANODYNE ELECTRONICS MANUFACTURING CORP.
This supplement contains installation and operation information that is unique to the LSA150-001
Loudspeaker Amplifier. Installation and operation information common to the LSA400-001 base unit can
be found in the ASM-LSA400 Installation and Operation Manual.
Prepared By:
Checked By:
Approved By:
Section 1.0 Description
The LSA150-001 Loudspeaker Amplifier is identical to the LSA400-001 with the following exceptions:
a) The speaker output driver is intended to drive 110 Wrms into 11 Ohms.
Section 2.0 Installation
For installation information and drawings, see ASM-LSA400 Section 2.0. Select the appropriate revision
of the drawing for the serial number of the unit. The drawings specific to this derivative are listed below
and can be found at the end of this supplement.
2.1 Installation Drawings
DOCUMENT
REV.
DESCRIPTION
TYPE
SERIAL NO.
Part No.
LSA150-001-403-0
1.00
Loudspeaker Amplifier
Interconnect
074614 and up
LSA150-001-403-1
1.00
Loudspeaker Amplifier
Interconnect
074614 and up
LSA150-001-403-2
1.01
Loudspeaker Amplifier
Interconnect
074614 and up
LSA150-001-405-0
1.00
Loudspeaker Amplifier
Connector Map
074614 and up
LSA150-001-521-0
1.00
Loudspeaker Amplifier
Environmental Qualification Form
074614 and up
LSA150-001-922-0
1.00
Loudspeaker Amplifier
Mechanical Installation
074614 and up
Section 3.0 Operation
For operation information, see ASM-LSA400 Section 3.0.
End of Supplement
Tony Pearson
Designer
July 16, 2018
Steve Kempf
Designer
Jul 26/18
Tom Betzelt
Product Support
Manager
July 23, 2018
Ron Briggs
R&D Mgr
Designate
Sept 24/18
DO NOT SCALE DRAWING
SHEET
UNLESS OTHERWISE SPECIFIED:
SCALE: DRAWING No.:
REV
PART No.
A
SIZE
TITLE:
NAME DATE
CHECKED
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL ±0.5 Deg
ANGULAR: MACH ±BEND ±
TWO PLACE DECIMAL ±0.01
THREE PLACE DECIMAL ±0.005
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
ANODYNE ELECTRONICS MANUFACTURING.
ANY REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
ANODYNE ELECTRONICS MANUFACTURING IS
PROHIBITED.
CAGE CODE
PROPRIETARY AND CONFIDENTIAL
APPROVED
L9015
ANODYNE
ELECTRONICS
MANUFACTURING CORP.
KELOWNA BC CANADA
(250)-763-1088
WWW.AEM-CORP.COM
LSA150-001 1.00
403-0
LOUDSPEAKER AMPLIFIER
1:1 1 of 3
INTERCONNECT
May 11, 2018
Jun 07/18
DO NOT SCALE DRAWING
SHEET
UNLESS OTHERWISE SPECIFIED:
SCALE: DRAWING No.:
REV
PART No.
A
SIZE
TITLE:
NAME DATE
CHECKED
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL ±0.5 Deg
ANGULAR: MACH ±BEND ±
TWO PLACE DECIMAL ±0.01
THREE PLACE DECIMAL ±0.005
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
ANODYNE ELECTRONICS MANUFACTURING.
ANY REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
ANODYNE ELECTRONICS MANUFACTURING IS
PROHIBITED.
CAGE CODE
PROPRIETARY AND CONFIDENTIAL
APPROVED
L9015
ANODYNE
ELECTRONICS
MANUFACTURING CORP.
KELOWNA BC CANADA
(250)-763-1088
WWW.AEM-CORP.COM
LSA150-001 1.00
403-0
LOUDSPEAKER AMPLIFIER
1:1 2 of 3
INTERCONNECT
May 11, 2018
Jun 07/18
DO NOT SCALE DRAWING
SHEET
UNLESS OTHERWISE SPECIFIED:
SCALE: DRAWING No.:
REV
PART No.
A
SIZE
TITLE:
NAME DATE
CHECKED
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL ±0.5 Deg
ANGULAR: MACH ±BEND ±
TWO PLACE DECIMAL ±0.01
THREE PLACE DECIMAL ±0.005
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
ANODYNE ELECTRONICS MANUFACTURING.
ANY REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
ANODYNE ELECTRONICS MANUFACTURING IS
PROHIBITED.
CAGE CODE
PROPRIETARY AND CONFIDENTIAL
APPROVED
L9015
ANODYNE
ELECTRONICS
MANUFACTURING CORP.
KELOWNA BC CANADA
(250)-763-1088
WWW.AEM-CORP.COM
LSA150-001 1.00
403-0
LOUDSPEAKER AMPLIFIER
1:1 3 of 3
INTERCONNECT, SPEAKER CONFIGS
May 11, 2018
Jun 07/18
DO NOT SCALE DRAWING
SHEET
UNLESS OTHERWISE SPECIFIED:
SCALE: DRAWING No.:
REV
PART No.
A
SIZE
TITLE:
NAME DATE
CHECKED
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL ±0.5 Deg
ANGULAR: MACH ± BEND ±
TWO PLACE DECIMAL ±0.01
THREE PLACE DECIMAL ±0.005
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
ANODYNE ELECTRONICS MANUFACTURING.
ANY REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
ANODYNE ELECTRONICS MANUFACTURING IS
PROHIBITED.
CAGE CODE
PROPRIETARY AND CONFIDENTIAL
APPROVED
L9015
ANODYNE
ELECTRONICS
MANUFACTURING CORP.
KELOWNA BC CANADA
(250)-763-1088
WWW.AEM-CORP.COM
LSA150-001 1.00
403-1
LOUDSPEAKER AMPLIFIER
1:1 1 of 3
INTERCONNECT
June 11, 2018
Jun 11/18
DO NOT SCALE DRAWING
SHEET
UNLESS OTHERWISE SPECIFIED:
SCALE: DRAWING No.:
REV
PART No.
A
SIZE
TITLE:
NAME DATE
CHECKED
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL ±0.5 Deg
ANGULAR: MACH ± BEND ±
TWO PLACE DECIMAL ±0.01
THREE PLACE DECIMAL ±0.005
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
ANODYNE ELECTRONICS MANUFACTURING.
ANY REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
ANODYNE ELECTRONICS MANUFACTURING IS
PROHIBITED.
CAGE CODE
PROPRIETARY AND CONFIDENTIAL
APPROVED
L9015
ANODYNE
ELECTRONICS
MANUFACTURING CORP.
KELOWNA BC CANADA
(250)-763-1088
WWW.AEM-CORP.COM
LSA150-001 1.00
403-1
LOUDSPEAKER AMPLIFIER
1:1 2 of 3
INTERCONNECT
June 11, 2018
Jun 11/18
DO NOT SCALE DRAWING
SHEET
UNLESS OTHERWISE SPECIFIED:
SCALE: DRAWING No.:
REV
PART No.
A
SIZE
TITLE:
NAME DATE
CHECKED
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL ±0.5 Deg
ANGULAR: MACH ± BEND ±
TWO PLACE DECIMAL ±0.01
THREE PLACE DECIMAL ±0.005
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
ANODYNE ELECTRONICS MANUFACTURING.
ANY REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
ANODYNE ELECTRONICS MANUFACTURING IS
PROHIBITED.
CAGE CODE
PROPRIETARY AND CONFIDENTIAL
APPROVED
L9015
ANODYNE
ELECTRONICS
MANUFACTURING CORP.
KELOWNA BC CANADA
(250)-763-1088
WWW.AEM-CORP.COM
LSA150-001 1.00
403-1
LOUDSPEAKER AMPLIFIER
1:1 3 of 3
INTERCONNECT, SPEAKER CONFIGS
June 11, 2018
Jun 11/18
DO NOT SCALE DRAWING
SHEET
UNLESS OTHERWISE SPECIFIED:
SCALE: DRAWING No.:
REV
PART No.
A
SIZE
TITLE:
NAME DATE
CHECKED
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL ±0.5 Deg
ANGULAR: MACH ± BEND ±
TWO PLACE DECIMAL ±0.01
THREE PLACE DECIMAL ±0.005
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
ANODYNE ELECTRONICS MANUFACTURING.
ANY REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
ANODYNE ELECTRONICS MANUFACTURING IS
PROHIBITED.
CAGE CODE
PROPRIETARY AND CONFIDENTIAL
APPROVED
L9015
ANODYNE
ELECTRONICS
MANUFACTURINGCORP.
KELOWNA BC CANADA
(250)-763-1088
WWW.AEM-CORP.COM
LSA150-001 1.01
403-2
LOUDSPEAKER AMPLIFIER
1:1 1 of 3
INTERCONNECT
1.01 RAS#788 - INTERCONNECT CORRECTIONS. 12-JUL-18 LAC
July 16, 2018
Jul 16/18
DO NOT SCALE DRAWING
SHEET
UNLESS OTHERWISE SPECIFIED:
SCALE: DRAWING No.:
REV
PART No.
A
SIZE
TITLE:
NAME DATE
CHECKED
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL ±0.5 Deg
ANGULAR: MACH ± BEND ±
TWO PLACE DECIMAL ±0.01
THREE PLACE DECIMAL ±0.005
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
ANODYNE ELECTRONICS MANUFACTURING.
ANY REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
ANODYNE ELECTRONICS MANUFACTURING IS
PROHIBITED.
CAGE CODE
PROPRIETARY AND CONFIDENTIAL
APPROVED
L9015
ANODYNE
ELECTRONICS
MANUFACTURINGCORP.
KELOWNA BC CANADA
(250)-763-1088
WWW.AEM-CORP.COM
LSA150-001 1.01
403-2
LOUDSPEAKER AMPLIFIER
1:1 2 of 3
INTERCONNECT
July 16, 2018
Jul 16/18
DO NOT SCALE DRAWING
SHEET
UNLESS OTHERWISE SPECIFIED:
SCALE: DRAWING No.:
REV
PART No.
A
SIZE
TITLE:
NAME DATE
CHECKED
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL ±0.5 Deg
ANGULAR: MACH ± BEND ±
TWO PLACE DECIMAL ±0.01
THREE PLACE DECIMAL ±0.005
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
ANODYNE ELECTRONICS MANUFACTURING.
ANY REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
ANODYNE ELECTRONICS MANUFACTURING IS
PROHIBITED.
CAGE CODE
PROPRIETARY AND CONFIDENTIAL
APPROVED
L9015
ANODYNE
ELECTRONICS
MANUFACTURINGCORP.
KELOWNA BC CANADA
(250)-763-1088
WWW.AEM-CORP.COM
LSA150-001 1.01
403-2
LOUDSPEAKER AMPLIFIER
1:1 3 of 3
INTERCONNECT, SPEAKER CONFIGS
July 16, 2018
Jul 16/18
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere AEM Verstärker Handbücher
