IWRLI2_13.04_5890700_00
RECEIPT OF THE PRODUCT AND
INSTALLATION
RECEIPT AND HANDLING
The machine is sent from the factory wrapped with
estincoil placed on a loading pallet.
Before handling the unit, verify the lifting capacity of
the machines used.
Handling must be performed by qualified, suitably
equipped staff.
- Whenever it is envisioned to lift the machine
with belts, so as not to damage the structure,
place protections between the belts and the
framework. It is prohibited to stop below the unit
during lifting.
-
-
CANNOT
SELECTION AND PLACE OF INSTALLATION
The WRL water/water INDOOR heat pump with
gas side inversion (R410A) is sent from the factory
already inspected and only requires electric and
hydraulic connections in the place of installation.
Before beginning installation consent with client and
pay attention to the following recommendations:
•The support surface must be capable of
supporng the unit weight.
•The safety distances between the units
and other appliances or structures must be
scrupulously respected.
•The unit must be installed by a skilled tech-
nician in compliance with the naonal law
in force in the country of desnaon.
•It is mandatory to foresee to the necessary
technical space in order to allow ROUTINE
AND EXTRAORDINARY MAINTENANCE in-
tervenons.
• Remember that whilst operaonal the chill-
er can cause vibraons; therefore “VT”an-
vibraon mounts (accessories) are recom-
mended, xed on the base according to the
assembly layout.
• Fix the unit, checking that it is level.
600mm
23,6 in
600mm
23,6 in
600mm
23,6 in
600mm
23,6 in
DRAWINGS
ONLY INDICATIVE
THE UNIT HAS TO BE INSTALLED
IN TECHNICAL ROOMS,
OR ROOMS WHICH HAVE AT
HANDLING
MINIMUM TECHNICAL SPACES
5
