Subject to Export Control, see Cover Page for details.
v
Precautions
SAFETY FIRST - TO ALL OPERATIONS PERSONNEL
GENERAL CONDITIONS OF USE
This product is designed and tested to comply with the requirements of IEC/EN61010-1 ‘Safety
requirements for electrical equipment for measurement, control and laboratory use’ for Class I portable
equipment and is for use in a pollution degree 2 environment. The equipment is designed to operate
from installation supply Category II.
Equipment should be protected from liquids such as spills, leaks, etc. and precipitation such as rain,
snow, etc. When moving the equipment from a cold to hot environment, allow the temperature of the
equipment to stabilize before the equipment is connected to the supply to avoid condensation forming.
The equipment must only be operated within the environmental conditions specified in the performance
data.
CASE, COVER OR PANEL REMOVAL
Opening the Case Assembly exposes the operator to electrical hazards that may result in electrical
shock or equipment damage. Do not operate this Test Set with the Case Assembly open.
SAFETY IDENTIFICATION IN TECHNICAL MANUAL
This manual uses the following terms to draw attention to possible safety hazards that may exist when
operating or servicing this equipment:
SAFETY SYMBOLS IN MANUALS AND ON UNITS
IDENTIFIES CONDITIONS OR ACTIVITIES THAT, IF IGNORED, CAN RESULT IN
EQUIPMENT OR PROPERTY DAMAGE, E.G., FIRE.
IDENTIFIES CONDITIONS OR ACTIVITIES THAT, IF IGNORED, CAN RESULT IN
PERSONAL INJURY OR DEATH.
CAUTION: Refer to accompanying documents. (This symbol refers to specific CAUTIONS
represented on the unit and clarified in the text.)
Indicates a Toxic hazard.
Indicates item is static sensitive.
AC TERMINAL: Terminal that may supply or be supplied with AC or alternating voltage.
