AG Neovo F-17C Bedienungsanleitung

Table of Contents

Precautions...................................................................................................................................................3

About this manual 3

Important Operating Instructions 4

Getting Started............................................................................................................................................5

Quick Setup 5

Unpacking 6

Attaching the Base 7

Adjusting the Monitor’s Tilting Angle 8

Security Slot 8

Making Connections 9

Removing the Rear-connector Cover 9

Connectors Close up 10

Replacing the Rear-connector Cover 11

Customizing your Monitor ...................................................................................................................... 12

Volume Adjust 12

Adjusting the Monitor’s Display 12

Selecting OSD Features 12

OSD Menus 14

Troubleshooting ........................................................................................................................................18

Troubleshooting Procedures 18

Warning Messages 18

Troubleshooting 19

LCD Panel Display Technical Features and Specifications 20

Regulations................................................................................................................................................. 21

FCC compliance 21

TCO’99 22

RECAUTIONS

About this manual

This manual is designed to assist you in setting up and using the LCD monitor. Information

in this document has been carefully checked for accuracy; however, no guarantee is given to

the correctness of the contents. The information in this document is subject to change with-

out notice. This document contains proprietary information protected by copyright. All

rights are reserved. No part of this manual may be reproduced by any mechanical, electronic

or other means, in any form, without prior written permission of the manufacturer.

Important Operating Instructions

1. Please read the following instructions carefully. This manual should be retained for

future use.

2. To clean the LCD monitor screen, first, make sure the monitor is in the power off

mode. Unplug the monitor from its power source before cleaning it. Do not spray

liquid cleaners directly onto the unit. Without applying excessive pressure, clean

the screen with a slightly dampened rag.

3. Do not cover or obstruct the ventilation openings on the rear of the monitor.

4. Do not place your LCD monitor near a heat source or open window, or in a location

exposed to direct sunlight, dust, or mechanical vibration.

5. Do not place anything on top of the monitor-to-PC signal cord. Make sure the cord is

placed in an area where it will not be stepped on.

6. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent

damage to the display.

7. Do not remove the cover or attempt to service this unit by yourself. You may void

the warranty.

8. Safe storage of the LCD monitor is in a range of minus 20 to plus 60 degrees Celsius.

9. Unplug the monitor if not in use for an extended period.

10. Use the original carton and packing materials when transporting the monitor.

11. Immediately unplug your monitor and call an authorized technician when:

 The power or monitor-to-PC signal cord is frayed or damaged.

 Liquid has been spilled into the monitor, or it has been exposed to rain.

 The monitor has been dropped or the case has been damaged.

 A distinct change in performance is noticed.

ETTING

TARTED

Your LCD monitor is versatile, ergonomic, and above all easy to use. The LCD monitor is ca-

pable of displaying most standards, from 640 x 480 VGA to 1280 by 1024 SXGA. Built-in ste-

reo speakers provide excellent stereo sound while saving desktop space. Finally, the front-

panel controls allow you to easily adjust the monitor’s display parameters to suit your hab-

its.

Quick Setup

Follow these directions to correctly set up your monitor.

1. Remove all packing materials and wrapping from the monitor (page 6).

2. Attach the base (page 7).

3. Place the monitor in its desired location. Ensure that there is space around the

monitor, especially the rear area near the vents.

4. Connect your video source and AC adapter (page 9).

5. Turn on the video source.

6. Press the power button on the monitor. The display should appear. If no display ap-

pears, check Warning Messages and Troubleshooting (page 18).

7. Ensure that your computer display is set at 1280X1024 pixels and 60Hz. Press the

AUTO button . The monitor optimizes the display automatically.

Note! The monitor is compliant with VESA FPMPMI standards and can be wall- or arm-

mounted. Before wall-mounting or arm-mounting, disassemble the monitor stand.

Unpacking

After you unpack the monitor, make sure the following items are included in the box and

are in good condition:

• LCD monitor 17-inch monitor without base

• Base assembly Includes base and screws

• Power adapter

• Power cord

• D-sub 15-pin VGA cable

• Audio cable

• Floppy/CD-ROM (containing

Windows information file and user’s

manual)

• Phillips screwdriver

If you find that any of these items are missing or appear damaged, contact your dealer im-

mediately. Do not throw away the packing material or shipping carton in case you need to

ship or store the LCD monitor in the future.

Attaching the Base

Before using the monitor, you must attach the base. You will need a Phillips screwdriver and

a blanket or foam sheet to lay the monitor on. The procedure is described below.

1. Cover a table with foam or a soft blanket to protect the monitor screen. Carefully

place the monitor with the screen facing down on the table.

2. Attach the base with the three screws.

3. Stand the monitor upright.

Adjusting the Monitor’s Tilting Angle

Your LCD monitor’s vertical tilting angle can be adjusted between 0º ~ 20º for comfortable

viewing.

To adjust the tilting angle, grasp the

top corners of the monitor with both

hands and tilt to the desired angle.

020

Warning! Forcing the monitor past its maximum extension can result in damage to the

monitor.

Security Slot

Your LCD monitor has a security slot built in to the rear of the monitor.

If you have any doubts on the

security of your LCD monitor,

secure it to a permanent

object in the room by means of

the security slot shown here:

Note! Consult your local dealer for information on purchasing a security slot cable.

Making Connections

Removing the Rear-connector Cover

Before making connections, you must remove the rear-connector cover. Refer to the follow-

ing:

1. Tilt the monitor to its 0º vertical position. (See Adjusting the Monitor’s Tilting Angle

on page 8.)

2. Remove the cover by gripping at the top and pulling in the direction of the arrow as

shown here:

Connectors Close up

The following illustration shows the connectors on the rear of the monitor. (Unplug the

power source when making connections. The final step in the following procedures should

be connecting the power adapter to a wall socket.)

Connector Cable Procedure

1 DC power

jack

Power cord and

adapter

Plug the adapter power connector into this DC

power jack. Plug the female end of the power

cable into the AC-adapter and the male end of

the power cord into a wall socket.

2 Audio-in

jack

Audio cable To avail of the monitor’s built-in stereo speakers,

plug the audio cable into this jack. Attach the

other end to your audio source.

3 Audio-out

jack

Headphone cable (not

included)

You can attach your headphones to this jack.

4 VGA

port

D-sub 15-pin VGA cable Connect one end of the cable to the VGA port.

Connect the other end to the PC’s VGA port.

Tighten the securing screws on both connectors.

1 4

Andere Handbücher für F-17C

Inhaltsverzeichnis

Andere AG Neovo Monitor Handbücher

AG Neovo

AG Neovo PN-46 Bedienungsanleitung

AG Neovo

AG Neovo LE-22E Bedienungsanleitung

AG Neovo

AG Neovo SX-Series Bedienungsanleitung

AG Neovo

AG Neovo SX-17 Bedienungsanleitung

AG Neovo

AG Neovo K-19 Bedienungsanleitung

AG Neovo

AG Neovo F-419 Bedienungsanleitung

AG Neovo

AG Neovo F-417 Bedienungsanleitung

AG Neovo

AG Neovo M-19 Bedienungsanleitung

AG Neovo

AG Neovo PN-46D Bedienungsanleitung

AG Neovo

AG Neovo HX-24 Bedienungsanleitung

AG Neovo

AG Neovo SC-2202 Bedienungsanleitung

AG Neovo

AG Neovo C-Series Bedienungsanleitung

AG Neovo

AG Neovo HX-24G Bedienungsanleitung

AG Neovo

AG Neovo RX-W19 Bedienungsanleitung

AG Neovo

AG Neovo X-174 Bedienungsanleitung

AG Neovo

AG Neovo SX-15 Bedienungsanleitung

AG Neovo

AG Neovo S-17A Bedienungsanleitung

AG Neovo

AG Neovo X-W19 Bedienungsanleitung

AG Neovo

AG Neovo RX-W42 Bedienungsanleitung

AG Neovo

AG Neovo X-215 Bedienungsanleitung

AG Neovo

AG Neovo S-15T Bedienungsanleitung

AG Neovo

AG Neovo PM-48 Bedienungsanleitung

AG Neovo

AG Neovo F-17C Bedienungsanleitung

AG Neovo

AG Neovo X-19 Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung