Agilent Technologies E4400B Bedienungsanleitung

Agilent

ESG Family of RF Signal Generators

Configuration Guide

Notice

This document is updated as often as once a month.

Please contact Agilent Technologies for the latest

information or check the

ESG family website at

http://www.agilent.com/find/esg

Analog only Digital and analog

ESG A series ESG AP series ESG D series ESG DP series

(high spectral purity) (high spectral purity)

250 kHz – 1 GHz E4400B E4423B E4430B E4434B

250 kHz – 2 GHz E4420B E4424B E4431B E4435B

250 kHz – 3 GHz E4421B E4425B E4432B E4436B

250 kHz – 4 GHz E4422B E4426B E4433B E4437B

Table of contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

ESG family of RF signal generators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Choosing options for a new purchase or a retrofit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Internal dual ar itrary waveform generator, Option UND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Real-time I/Q ase and generator, Option UN8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Internal it-error-rate analyzer, Option UN7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

GSM/EDGE ase station BERT, Option 300. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

cdmaOne multichannel, multicarrier personality, Option UN5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

3GPP W-CDMA multichannel, multicarrier personality, Option 100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

cdma2000 multichannel, multicarrier personality, Option 101 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

3GPP W-CDMA personality for the real-time ase and generator, Option 200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

cdma2000 personality for the real-time ase and generator, Option 201 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

EDGE personality for the real-time ase and generator, Option 202 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Attenuators, Options, UNA, UNB and H99 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Documentation, support and mechanical hardware options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Application and product information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Related literature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

ntroduction

Standard Agilent Technologies ESG family RF signal generators incorporate a road array of capa ilities for testing

oth analog and digital communications systems. Adding flexi le options provides a test solution that will evaluate

the performance of a communication system to the requirements of nearly all current and proposed air interface

standards. Many test functions can e customized to meet the needs of proprietary and other nonstandard wireless

protocols as well. This guide descri es how you can configure your instrument to address a wide variety of tests—

from altering nearly every aspect of a digital signal or signal operating environment to creating experimental signals.

This flexi ility, along with an architecture that accepts future enhancements, makes the ESG family an excellent

choice for wireless communication system testing now and in the future.

ESG family of

RF signal generators

The ESG family consists of four

series:

ESG-A series: analog instruments

ESG-AP series: analog instruments

with high spectral purity.

ESG-D series: digital and analog

instruments.

ESG-DP series: digital and analog

instruments with high spectral

purity.

Refer to ta le 1 for a list of the

model num ers and their associated

capa ilities including frequency

range, spectral purity, and modula-

tion capa ility.

In keeping pace with ever-changing

digital communication standards,

Agilent Technologies is the leading-

edge supplier of the latest signal-

generator technology. To meet your

evolving needs, Agilent Technologies

constantly enhances the ESG family

feature set. The latest released

features are availa le as firmware

for you to download online. In

most cases, firmware up-grades

can e done without any hardware

modification. If a hardware modifi-

cation is required, instructions

are given on the We page. The

ESG’s address is

www.agilent.com/find/esg. Here

you will find the latest news on the

ESG including firmware upgrades,

frequently asked questions and new

features.

Please consult the Agilent Technologies

ESG family RF digital and analog

signal generators rochure, and the

technical specifications for more

information. For your reference, a

list of related literature is shown at

the end of this profile.

Key standard features

• Expanda le architecture

• Broad frequency coverage

• Choice of electronic or mechanical

attenuator

• Superior level accuracy

• Wide and FM and ΦM

• Step sweep (frequency, power

and list)

• Built-in function generator

• Lightweight, rack-mounta le

• 3-year warranty

• 2-year cali ration cycle

• IntuiLink PC software1

Standard features only in the

ESG–D/DP series

• Broad and analog I/Q inputs

• I/Q adjustment capa ilities and

internal cali ration

• Excellent modulation accuracy

and sta ility

• Coherent carrier output

Analog only Digital and analog

ESG A series ESG AP series ESG D series ESG DP series

(high spectral purity) (high spectral purity)

250 kHz – 1 GHz E4400B E4423B E4430B E4434B

250 kHz – 2 GHz E4420B E4424B E4431B E4435B

250 kHz – 3 GHz E4421B E4425B E4432B E4436B

250 kHz – 4 GHz E4422B E4426B E4433B E4437B

dBc/Hz

10 100 1000 10000 100000 1000000

–70

–80

–90

–100

–110

–120

–130

–140

–150

–160

Offset (Hz)

10000000

ESG DP

ESG AP

ESG D

ESG A

Choosing a model number

Typical SSB phase noise at 1 GHz (for additional phase noise plots, please refer to ESG Family

of RF Signal Generators, Data Sheet, literature number 5965-3096E.

1. IntuiLink software included free. For more information see page 26.

Hardware options Requires Not compatible with

High stability timebase x Standard x Standard

❑Option 1E5

High power with mechanical attenuator x x x x Options UNA, 300,

❑Option UNB (Retrofit =Special5) H03, H98, H99

Alternate time slot level control x x Option UN8 Option UNB, H03,

❑Option UNA (Retrofit =Special5) H98, H99

Improved ACP performance for TETRA, x x Option UNB, UNA, H03

CDMA, WCDMA and cdma2000

❑Option H99 (Retrofit =Special5)

High performance pulse modulation x x

❑Option 1E6

Internal dual arbitrary waveform generator x x Options 300, H03, H98

❑Option UND (Retrofit =0042)

Real time I/Q baseband generator 1M RAM x x Options H03, H98

❑Option UN8 (Retrofit =0082)

Add 7M RAM to Option UN8 x x Option UN8 Options H03, H98

❑Option UN9 (Retrofit =0092,6)

Internal bit error rate (BER) analyzer x x Option UN8 Options H03, H98, 300

❑Option UN7 (Retrofit =0072) (or UN3 or UN4)

Firmware options

Multicarrier, multichannel cdmaOne x x Option UND Options 300, H03, H98

personality for Option UND

❑Option UN5 (Retrofit =0053)

Multicarrier, multichannel W CDMA x x Option UND Options 300, H03, H98

personality for Option UND

❑Option 100 (Retrofit =1503)

Multicarrier, multichannel cdma2000 x x Option UND Options 300, H03, H98

personality for Option UND

❑Option 101 (Retrofit =1513)

Real time 3GPP W CDMA personality for x x Option UN8, revision C Options H03, H98

Option UN8

❑Option 200 (Retrofit=2503,4 )

Real time cdma2000 personality for Option UN8 x x Option UN8, revision C Options H03, H98

❑Option 201 (Retrofit =2513,4)

Real time EDGE personality for Option UN8 x x Option UN8, revision C Options H03, H98

❑Option 202 (Retrofit =2523,4)

Base station BERT1x Option UN8, revision C, Options UNB, H99, UND,

❑Option 300 202; recommend UNA. UN5, 100, 101, H98, H03,

Also requires E4406A UN7

with options 300 and 202

ESG-A series

ESG-AP series

ESG-D series

ESG-DP series

1. Currently for GSM/EDGE only. Also refer to GSM/EDGE Base Station Test, literature number 5968 8333E.

2. This customer installable upgrade kit includes the necessary hardware and instructions for option installation in any digital B model, excluding instruments

with Option 1EM. Depending on the existing option configuration, the kit may include hardware that will be discarded.

3. Customer installable with software license key.

4. This upgrade requires Option UN8 revision C. A hardware upgrade may be required for retrofits. Contact Agilent Technologies for more details.

5. This special requires installation at the Agilent Technologies factory. Contact your Agilent Technologies sales representative for more information.

6. The Option 009 retrofit kit includes both Option UN8 and Option UN9.

Note: Options UND, UN5, UN7, UN8, 100, 101, 200, 201, and 202 are mutually compatible and can be loaded in the same instrument.

Choosing options for a new purchase or a retrofit

Option availability and compatibility

nternal dual arbitrary

waveform generator,

Option UND

Adapt quickly to changing market

needs with a completely flexi le

ase and generator. Download

waveforms that simulate complex,

non-standard or proprietary modula-

tion schemes. Replay complex wave-

forms to simulate multicarrier

CDMA and TDMA signals to easily

characterize ase station power

amplifiers. Generate I/Q files from

many different application programs,

such as Omnisys, MATLAB™, and

Mathcad™, and then download

the waveform from an external

computer through GPIB or RS-232.

Description

Option UND is one of two internal

ase and generator cards for the

ESG-D and ESG-DP series. This

dual ar itrary waveform generator

provides an extremely flexi le

ase and generation for the most

complex RF waveforms.

It is provided on a user-installa le

card that can e added to the

B version of any existing ESG, or

any new instrument.

Available personalities

• Multicarrier, multichannel cdmaOne,

Option UN5

• Multichannel W-CDMA 1.0,

Option 100

• Multichannel cdma2000,

Option 101

Key features

High performance 14-bit digital to analog

converters (DAC)

Improve simulation and reduce

noise floor.

The state of the art 14- it DACs

have only 25% of the quantization

error of an ordinary 12- it ar itrary

waveform generation.

Deep 1 megasample/channel arbitrary

waveform memory

Download or store extremely long

or numerous waveforms.

Both the volatile and nonvolatile

RAM have 1 Megasample of memory

per channel. Switch etween multiple

waveforms instantaneously to

minimize valua le download time

in a manufacturing environment.

Clock

generator

Digital

signal

processor

I RAM

1 MWord

GP B Main

CPU

Q RAM

1 MWord

10 MHz internal reference

1 to 20 MHz external reference

DAC

Reconstruction

filters

data

NV RAM

1MWord

NV RAM

1MWord

addresses

Out

MHz

8 MHz

250 kHz

2.5 MHz

Out

MHz

8 MHz

250 kHz

2.5 MHz

High-performance internal dual arbitrary waveform generator block diagram.

Option UND (continued)

Multitone1

Measure intermodulation distortion

of an amplifier by applying a

multitone waveform.

Select up to 64 equally spaced tones,

with the option of turning off any

com ination of tones. Adjust the

frequency spacing etween the tones

and the phase of each individual

tone to maximize measurement

accuracy.

Three reconstruction filters

Minimize D/A spurs by matching

reconstruction filters to sample rates.

Select from 250 kHz, 2.5 MHz or

8.0 MHz reconstruction filters, or

provide your own external filter.

External triggers1

Synchronize the playbac of wave-

forms with external test equipment.

Select from continuous, single,

gated, or segment advance triggering

with up to a one-hour delay time.

Markers1

Trigger other events at specific points

in the playbac of a waveform.

Define marker locations in a

segment during the waveform-

generation process, or from the

front panel. Activate or deactivate

markers for each segment using the

sequence ta le editor. A marker

can also e tied to the RF lanking

feature of the ESG to simulate

ursted signals.

Additive white Gaussian noise1

Simulate bac ground noise in a

transmission.

Create additive white Gaussian

noise waveforms up to 15 MHz in

andwidth with varia le waveform

lengths.

Multitone editor setup.

Depicts the 64 tone signal resulting from the multitone setup.

1. New features available with firmware revision B.02.21 and higher. Triggers require a hardware upgrade. For more information consult the ESG Web page at

www.agilent.com/find/esg.

Option UND (continued)

Bluetooth1

Test Bluetooth components and systems

with standards-compliant signals.

Specify Bluetooth device address,

active mem er address, and payload

data for a DH1 packet type. Three

payload data formats are availa le:

8- it pattern, truncated PN9 sequence,

and continuous PN9 sequence. When

continuous PN9 is selected, clock and

gate signals with delay control are

also generated. These signals can e

used to extract the continuous PN9

payload data from the DH1 packet

when performing receiver it-error-

rate tests using Option UN7 (internal

BER analyzer).

The Bluetooth personality offers a

variety of impairments to synthesize

non-ideal signals for receiver testing.

Availa le impairments include modu-

lation index, sym ol timing error,

carrier frequency offset, linear and

sinusoidal carrier frequency drift,

and AWGN. Define the urst shape y

specifying the num er of sym ols per

ramp to test a receiver’s response to

different transmitter urst profiles.

Option UN8 also offers a Bluetooth

predefined modulation format, how-

ever, Bluetooth packets are not creat-

ed. Instead a data pattern is selected

or downloaded to Option UN8 and

that data pattern is then Bluetooth

modulated.

For more information, refer to

Performing Bluetooth RF Measure-

ments Today, Application Note 1333,

literature num er 5968-7746E.

Multicarrier1

Characterize multicarrier compo-

nents y applying multiple digitally

modulated carriers. Generate up to

64 modulated carriers in a 15 MHz

andwidth. Adjust the frequency and

power offset of each carrier to meet

test requirements. Select from pre-

defined modulation formats or create

a custom format. Define a custom for-

mat y choosing the modulation type,

filter and sym ol rate. Custom modu-

lation types include a variety of PSK,

QAM, FSK and MSK. The data used

on each carrier is random.

Pre-defined formats include:

NADC TETRA

PDC APCO25

PHS CDPD

GSM PWT

DECT EDGE

89441A display of modulation quality of a Bluetooth signal generated by an ESG.

Multicarrier GSM setup.

Multicarrier GSM spectrum resulting from the configuration shown in GSM setup.

1. New features available with firmware revision B.03.20 and higher.

Real-time /Q baseband

generator, Option UN8

Option UN8 simulates mo ile or ase

station transmissions of common digi-

tal communication standards. The

real-time I/Q ase and generator

supports DECT, GSM, NADC, PDC,

PHS, TETRA, and CDMA communi-

cation standards. Data for these

standards can e generated internal-

ly or supplied externally. After set-

ting the frequency and amplitude

of your signal, TDMA standards

are availa le with the touch of one

utton. Alternatively, you can mix

and match modulation types, sym ol

rates and filters to create custom

platforms for developing new or

proprietary communication standards.

Description

Option UN8 is one of two internal

ase and generator cards for the

ESG family. This real-time I/Q

ase and generator uilds digitally

modulated signals y mixing and

matching modulation types, sym ol

rates and filters. It is provided on

a user-installa le card that can e

added to the B version of any existing

ESG or any new instrument.

Different personalities may e

purchased separately to provide

specific modulation formats.

Option UN8 is a standard option

with 1 Mega yte of RAM to store

custom data. To increase the RAM

to 8 Mega ytes, Option UN8 can e

ordered in conjunction with Option

UN9 (Option UN8 consists of two

cards). Option UN9 replaces one of

these cards to provide 8 Mega ytes

of RAM.

Key features

ntuitive menu

Easy selection of predefined

standards.

Common communication standards

(NADC, GSM, PDC, PHS, DECT,

TETRA) are introduced at the first

menu level. The second level provides

flexi le access for asic configuring

of data, timeslots, and framing.

Mix and match modulation types,

symbol rates and filters

Create custom platforms for

developing new or proprietary

communication standards.

The real-time I/Q ase and generator

(Option UN8) ena les simple genera-

tion of complex signals. It is easy to

mix and match a modulation type

from one standard with a filter type

from another. For example, generate

a CDPD signal y selecting an NADC

format and su stitute a 0.5 GMSK

modulation instead of the standard

p/4 DQPSK modulation or generate

PWT, a DECT variant, y su stituting

π/4 DQPSK modulation in the DECT

standard. Implement and recall

non-standard solutions easily.

Unlimited modulation types using FSK,

/Q and differential table editors

Define modulation formats specific

to application needs or impair the

standard modulation formats for

stress testing.

Select modulations from a menu of

PSK, MSK, QAM or FSK modulation

types.

Define the constellation of your choice

with up to 16 values of I and Q. Add

impairments such as origin offset,

EVM, phase error, and quadrature

error to the I/Q definition to test

design ro ustness. Before generating

the modulated signal, display the I/Q

state map for a quick visual check.

You can build asymmetric FSK formats such as FLEX with the FSK table editor.

Customize modulations or perform margin testing with the /Q table editor.

Option UN8 (continued)

Symbol rates up to 12.5 MHz

Specify rates to cover the existing

communications systems and new

third-generation systems.

If you want to create a new modula-

tion scheme, the real-time I/Q

ase and generator sym ol rate

can e specified from 50 Hz to

12.5 MHz. This range covers existing

communications systems such as

GSM at 270.833 Ksps and NADC at

24.3 Ksps and new emerging wide-

and communication systems.

nternal data generator

Generate PN (pseudo-random noise)

sequences or repeating patterns.

Internally generate PN9, PN11,

PN15, PN20 and PN23 (pseudo-

random noise) sequences or fixed

4- to 64- it repeating patterns. Other

data patterns can e downloaded

into memory or generated in real-time,

through the data/clock/sync inputs.

Burst shaping

Create custom burst to simulate

unique traffic patterns.

Adjust urst rise/fall time and delay

through softkeys under the chosen

TDMA protocol. Customized or

standard ursts may also e

provided externally through the

external 1 input.

Unlimited baseband filtering

Select or build your own filters to

control bandwidth and modulation

quality.

Nyquist, root Nyquist, Gaussian and

IS-95 FIR filters are all availa le.

Specify the filter alpha from 0 to 1

or the BT ( andwidth time product)

for a Gaussian filter from 0.1 to 1.

The FIR ta le editor ena les you

to uild your own filters or add

impairments such as static fading

in the channel. Test new designs in

the manufacturing environment y

using the same filter and signal

impairments. Changing the filter

factor can also e used to intentional-

ly change signal characteristics such

as EVM. This is a useful tool to test

receivers under real-life conditions.

mplement custom F R filters via the F R table editor.

Displayed FFT response of custom filter.

Option UN8 (continued)

Flexible frames and timeslots

Stimulate real TDMA transmissions.

You can independently configure and

ena le each timeslot, adjust timeslot

type, data type and control field

information. You may also customize

a timeslot y downloading a specific

data sequence into memory and then

inserting the user file into a custom

timeslot.

Block diagram

Option UN8 provides a flexi le way

to access digital modulation uilding

locks for uilding custom signals or

to impair standard signals.

Frame triggering and delay

Synchronize multiple signal

generators and other test equip-

ment to simulate a complex TDMA

environment.

Frame externally generated real-time

data y multiplexing the signal with

the internally generated framing.

When frame triggering is selected,

you can choose whether to respond

immediately upon receipt of a

trigger or delay the response.

Option UN8 conceptual menu structure block diagram.

Agilent Technologies

continually adds

new features to the

ESG series to

address changing

communication-test

requirements.

MSK

PSK

FSK

QAM

I/Q table editor

PN sequences

internal

external

Root Nyquist

Nyquist

Gaussian

user FIR

Selectable

Type

rise/fall

delay

APC025

Bluetooth

CDPD

Modulation type

Data types

Filters

Symbol rate

Burst shape

Predefined modulation

Digital

custom

modulation

Andere Handbücher für E4400B

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Agilent Technologies Wechselrichter Handbücher

Agilent Technologies

Agilent Technologies N4970A Bedienungsanleitung

Agilent Technologies

Agilent Technologies N5106A PXB Baseband Bedienungsanleitung

Agilent Technologies

Agilent Technologies 8648A Service-Handbuch

Agilent Technologies

Agilent Technologies 8960 Bedienungsanleitung

Agilent Technologies

Agilent Technologies AGILENT U2761A Bedienungsanleitung

Agilent Technologies

Agilent Technologies PSG Series Installations- und Betriebshandbuch

Agilent Technologies

Agilent Technologies 33120A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 16522A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 33120A Bedienungsanleitung

Agilent Technologies

Agilent Technologies E4400-60230 g Kurzanleitung

Agilent Technologies

Agilent Technologies 33120A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 33220A Bedienungsanleitung

Agilent Technologies

Agilent Technologies Agilent 33500 Series Service-Handbuch

Agilent Technologies

Agilent Technologies 346A Service-Handbuch

Agilent Technologies

Agilent Technologies 83620B Bedienungsanleitung

Agilent Technologies

Agilent Technologies 33250A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 205AG Service-Handbuch

Agilent Technologies

Agilent Technologies E4428C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E4400-60246 Installations- und Betriebshandbuch

Agilent Technologies

Agilent Technologies E4438C ESG Bedienungsanleitung

Agilent Technologies

Agilent Technologies E8247C PSG CW Bedienungsanleitung

Agilent Technologies

Agilent Technologies E4438C Bedienungsanleitung

Agilent Technologies

Agilent Technologies U9391C Service-Handbuch

Agilent Technologies

Agilent Technologies MXG (Series A and B) Bedienungsanleitung

Beliebte Wechselrichter Handbücher anderer Marken

Fourgroup

Fourgroup Easy Bedienungsanleitung

Velleman

Velleman PI300M Bedienungsanleitung

Sungrow

Sungrow SG350HX-US Bedienungsanleitung

WilTec

WilTec 61897 Bedienungsanleitung

SMA

SMA SUNNY BOY STORAGE 2.5 Bedienungsanleitung

Simplicity

Simplicity LANDLORD 316 Bedienungsanleitung

Santak

Santak SMAX 3000 Bedienungsanleitung

ATON

ATON RA.Store-3 Bedienungsanleitung

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Bedienungsanleitung

Tektronix

Tektronix CFG250 Bedienungsanleitung

Champion

Champion 200989 Bedienungsanleitung

Vanner

Vanner 20-500 Series Bedienungsanleitung

GE GEP Bedienungsanleitung

Astrel Group

Astrel Group Power Reducer Kurzanleitung

MULTIQUIP

MULTIQUIP GDP-5H Leitfaden

GoWISE

GoWISE PS1007 Bedienungsanleitung

Promate

Promate PM13500D ES Bedienungsanleitung

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Bedienungsanleitung