Agilent Technologies 34410A Bedienungsanleitung

Agilent Technologies

Agilent 34410A/11A

6 ½ Digit Multimeter

User’s Guide

234410A/11A User’s Guide

Notices

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation

into a foreign language) without prior agree-

ment and written consent from Agilent

Technologies, Inc. as governed by United

States and international copyright laws.

Manual Part Number

34410-90001

Edition

First Edition, October 2005

Printed in USA

Agilent Technologies, Inc.

395 Page Mill Road

Palo Alto, CA 94303 USA

Waste Electrical and

Electronic Equipment (WEEE)

Directive 2002/96/EC

This product complies with the WEEE Direc-

tive (2002/96/EC) marking requirement.

The affixed product label (see below) indi-

cates that you must not discard this electri-

cal/electronic product in domestic

household waste.

Product Category: With reference to the

equipment types in the WEEE directive

Annex 1, this product is classified as a

"Monitoring and Control instrumentation"

product.

Do not dispose in domestic household

waste

To return unwanted products, contact your

local Agilent office, or see

www.agilent.com/environment/product

for more information

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the max-

imum extent permitted by applicable

law, Agilent disclaims all warranties,

either express or implied, with regard

to this manual and any information

contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a par-

ticular purpose. Agilent shall not be

liable for errors or for incidental or

consequential damages in connec-

tion with the furnishing, use, or per-

formance of this document or of any

information contained herein. Should

Agilent and the user have a separate

written agreement with warranty

terms covering the material in this

document that conflict with these

terms, the warranty terms in the sep-

arate agreement shall control.

Restricted Rights Legend

If software is for use in the performance of a

U.S. Government prime contract or subcon-

tract, Software is delivered and licensed as

“Commercial computer software” as

defined in DFAR 252.227-7014 (June 1995),

or as a “commercial item” as defined in FAR

2.101(a) or as “Restricted computer soft-

ware” as defined in FAR 52.227-19 (June

1987) or any equivalent agency regulation or

contract clause. Use, duplication or disclo-

sure of Software is subject to Agilent Tech-

nologies’ standard commercial license

terms, and non-DOD Departments and

Agencies of the U.S. Government will

receive no greater than Restricted Rights as

defined in FAR 52.227-19(c)(1-2) (June

1987). U.S. Government users will receive

no greater than Limited Rights as defined in

FAR 52.227-14 (June 1987) or DFAR

252.227-7015 (b)(2) (November 1995), as

applicable in any technical data.

Technology Licenses

The hardware and/or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

Safety Notices

CAUTION

A CAUTION notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a

CAUTION notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in personal injury or death. Do not

proceed beyond a WARNING

notice until the indicated condi-

tions are fully understood and

met.

34410A/11A User’s Guide 3

Safety Information

Do not defeat power cord safety ground fea-

ture. Plug in to a grounded (earthed) outlet.

Do not use product in any manner not speci-

fied by the manufacturer.

Do not install substitute parts or perform

any unauthorized modification to the prod-

uct. Return the product to an Agilent Tech-

nologies Sales and Service Office for service

and repair to ensure that safety features are

maintained.

Safety Symbols

WARNING

Main Power and Test Input Dis-

connect: Unplug instrument from

wall outlet, remove power cord,

and remove all probes from all

terminals before servicing. Only

qualified, service-trained person-

nel should remove the cover from

the instrument.

WARNING

Line and Current Protection

Fuses: For continued protection

against fire, replace the line fuse

and the current-protection fuse

only with fuses of the specified

type and rating.

WARNING

Front/Rear Switch: Do not

change the position of the

Front/Rear switch on the front

panel while signals are present on

either the front or rear set of ter-

minals. The switch is not intended

as an active multiplexer. Switch-

ing while high voltages or cur-

rents are present may cause

instrument damage and lead to

the risk of electric shock.

WARNING

IEC Measurement Category II. The

HI and LO input terminals may be

connected to mains in IEC Cate-

gory II installations for line volt-

ages up to 300 VAC. To avoid the

danger of electric shock, do not

connect the inputs to mains for

line voltages above 300 VAC. See

"IEC Measurement Category II

Overvoltage Protection" on the

following page for further infor-

mation.

WARNING

Protection Limits: To avoid instru-

ment damage and the risk of elec-

tric shock, do not exceed any of

the Protection Limits defined in

the following section.

Earth Ground

Chassis Ground

Risk of electric shock

Refer to manual for addi-

tional safety information

CAT II (300 v)

IEC Measurement Category II.

Inputs may be connected to

mains (up to 300 VAC) under

Category II overvoltage condi-

tions.

434410A/11A User’s Guide

Protection Limits

The Agilent 34410A Digital Multimeter pro-

vides protection circuitry to prevent damage

to the instrument and to protect against the

danger of electric shock, provided the Pro-

tection Limits are not exceeded. To ensure

safe operation of the instrument, do not

exceed the Protection Limits shown on the

front and rear panel, and defined below:

Note: The front-panel terminals are shown

above. The rear-panel terminals are identi-

cal. The Front/Rear switch selects the ter-

minal set to be used. Do not operate this

switch while signals are present on the

front or rear terminals. The current-protec-

tion fuse is on the rear panel.

Input Terminal Protection

Limits

Protection Limits are defined for the three

input terminals:

Main Input (HI and LO) Terminals. The HI

and LO input terminals are used for voltage,

resistance, capacitance, and diode test

measurements. Two Protection Limits are

defined for these terminals:

HI to LO Protection Limit. The Protection

Limit from HI to LO ("A" in the figure at

left) is 1000 VDC or 750 VAC, which is

also the maximum voltage measurement.

This limit can also be expressed as 1000

Vpk maximum.

LO to Ground Protection Limit. The LO

input terminal can safely "float" a maxi-

mum of 500 Vpk relative to ground. This is

Protection Limit "B" in the figure.

As is implied by the above limits, the Protec-

tion Limit for the HI input terminal is a maxi-

mum of 1500 Vpk relative to ground.

Current Input Terminal. The current input

("I") terminal has a Protection Limit of 3A

(rms) maximum current flowing from the LO

input terminal. This is Protection Limit "C"

in the figure. Note that the current input ter-

minal will be at approximately the same

voltage as the LO terminal.

Note: The current-protection circuitry

includes a fuse on the rear panel. To main-

tain protection, replace this fuse only with a

fuse of the specified type and rating (see

"Operator Maintenance" in Chapter 1).

Sense Terminal Protection

Limits

The HI and LO sense terminals are used

only for four-wire resistance measurements

("Ω 4W"). The Protection Limit is 200 Vpk

for all of the terminal pairings ("D" in the

figure):

LO sense to LO input.

HI sense to LO input.

HI sense to LO sense.

Note: The 200 Vpk limit on the sense termi-

nals is the Protection Limit. Operational

voltages in resistance measurements are

much lower — less than 10 V in normal

operation.

IEC Measurement Category II

Overvoltage Protection

To protect against the danger of electric

shock, the Agilent 34410A/11A Digital Mul-

timeter provides overvoltage protection for

line-voltage mains connections meeting

both of the following conditions:

The HI and LO input terminals are con-

nected to the mains under Measurement

Category II conditions, defined below, and

The mains are limited to a maximum line

voltage of 300 VAC.

IEC Measurement Category II includes elec-

trical devices connected to mains at an out-

let on a branch circuit. Such devices include

most small appliances, test equipment, and

other devices that plug into a branch outlet

or socket. The 34410A/11A may be used to

make measurements with the HI and LO

inputs connected to mains in such devices,

or to the branch outlet itself (up to 300

VAC). However, the 34410A/11A may not be

used with its HI and LO inputs connected to

mains in permanently installed electrical

devices such as the main circuit-breaker

panel, sub-panel disconnect boxes, or per-

manently wired motors. Such devices and

circuits are subject to overvoltages that may

exceed the protection limits of the 34410A.

Note: Voltages above 300 VAC may be mea-

sured only in circuits that are isolated from

mains. However, transient overvoltages are

also present on circuits that are isolated

from mains. The Agilent 34410A/11A is

designed to safely withstand occasional

transient overvoltages up to 2500 Vpk. Do

not use this equipment to measure circuits

where transient overvoltages could exceed

this level.

34410A/11A User’s Guide 5

DECLARATION OF CONFORMITY

According to ISO/IEC Guide 22 and CEN/CENELEC EN 45014

Manufacturer’s Name: Agilent Technologies, Incorporated

Manufacturer’s Address: 815 – 14th St. SW

Loveland, CO 80537

USA

Declares under sole responsibility that the product as originally delivered

Product Name: 6 ½ Digit Multimeter

Model Number: 34410A, 34411A

Product Options: This declaration covers all options of the above product(s)

complies with the essential requirements of the following applicable European Directives, and

carries the CE marking accordingly:

Low Voltage Directive (73/23/EEC, amended by 93/68/EEC)

EMC Directive (89/336/EEC, amended by 93/68/EEC)

and conforms with the following product standards:

EMC Standard

IEC 61326-1:1997+A1:1998 / EN 61326-1:1997+A1:1998

CISPR 11:1990 / EN 55011:1991

IEC 61000-4-2:1995+A1:1998 / EN 61000-4-2:1995

IEC 61000-4-3:1995 / EN 61000-4-3:1995

IEC 61000-4-4:1995 / EN 61000-4-4:1995

IEC 61000-4-5:1995 / EN 61000-4-5:1995

IEC 61000-4-6:1996 / EN 61000-4-6:1996

IEC 61000-4-11:1994 / EN 61000-4-11:1994

Canada: ICES-001:1998

Australia/New Zealand: AS/NZS 2064.1

Limit

Group 1 Class A

4 kV CD, 4 kV AD

3 V/m, 80-1000 MHz

0.5 kV signal lines, 1 kV power lines

0.5 kV line-line, 1 kV line-ground

3 V, 0.15-80 MHz 1 cycle, 100%

Interrupts: 10 ms, 20 ms

The product was tested in a typical configuration with Agilent Technologies test systems.

Safety IEC 61010-1:2001 / EN 61010-1:2001

Canada: CSA C22.2 No. 61010-1:2004

USA: UL 61010-1: 2004

Supplementary Information:

This DoC applies to above-listed products placed on the EU market after:

20 October 2005

Date Ray Corson

Product Regulations Program Manager

For further information, please contact your local Agilent Technologies sales office, agent or distributor,

or Agilent Technologies Deutschland GmbH, Herrenberger Straße 130, D 71034 Böblingen, Germany.

634410A/11A User’s Guide

34410A/11A User’s Guide 7

Agilent 34410A/11A at a Glance

The Agilent Technologies 34410A and 34411A multimeters

give you the performance you need for fast, accurate bench

and system testing. These multimeters provides 6½- digits of

resolution and 0.0015% basic 24- hr dcV accuracy.

Convenient bench-top features

• Continuity and diode testing

• Capacitance measurements

• A dual display of multiple measurement data, such as

Frequency and ac voltage, at the same time

• Bar graph display to help you see limits exceeded in

measurements

• Data logging that allows you to select a function, space

measurements in time, and choose your logging duration

• Instrument state storage with user- defined names

• Portable, ruggedized case with non- skid feet

Flexible system features

• GPIB (IEEE- 488), USB, and LAN remote interfaces are

standard

• SCPI (Standard Commands for Programmable

Instruments) compatibility

• Voltmeter Complete and External Trigger signals to

synchronize to other instruments in your test system

Note: This manual covers the operation of the Agilent

34410A and 34411A 6½ Digit Multimeters. The features

described in this manual, except where otherwise stated,

apply to both Models 34410A and 34411A.

Model 34410A Model 34411A

•Up to 10,000 readings per second •Up to 50,000 readings per second

•Reading memory (buffer) up

to 50,000 readings

•Reading memory (buffer) up

to 1 million readings

•Pretriggering, internal level triggering,

and digitizer specifications.

834410A/11A User’s Guide

The Front Panel at a Glance

WARNING

Front/Rear Switch: Do not change the position of the Front/Rear switch on the front panel while signals are

present on either the front or rear set of terminals. This switch is not intended as an active multiplexer.

Switching while high voltages or currents are present may cause instrument damage and lead to the risk of

electric shock.

1 Multimeter On/Off Switch 13 DC Voltage measurement function key (shifted function: DC Current)

2 Front/Rear Terminal Selection Switch 14 AC Voltage measurement function key (shifted function: AC Current)

3 HI Sense Terminal (also 4-wire Ω) 15 2-wire Ohms measurement function key (shifted function: 4-wire Ohms)

4 LO Sense Terminal (also 4-wire Ω) 16 Second Display key (shifted function: Multimeter Reset)

5 HI Input terminal 17 Data Logger Function Key (shifted function: Utility Menu)

6 LO Input terminal 18 Exit key (when not in a menu, also toggles Auto Range function on/off)

7 Current Input terminal 19 Frequency/Period measurement function key (shifted function: Capacitance)

8 Left navigation key (< integration ) 20 Continuity measurement function key (shifted function: Diode Check)

9 Right navigation key (> integration) 21 Configuration Menu key (shifted function: Temperature)

10 Up navigation key (> range) 22 Null function key (shifted function: Math Menu)

11 Down navigation key (< range) 23 Trigger key (shifted function: Auto Trigger Menu)

12 Enter key 24 Shift key (also returns multimeter from remote to Local operation)

34410A/11A User’s Guide 9

The Rear Panel at a Glance

WARNING

For protection from electrical shock, the power cord ground must not be defeated.

1 Power cord receptacle

2 Power-line fuse holder

3 Line voltage indicator

4 Current input fuse holder

5 LAN cable receptacle

6 USB cable receptacle

7 GPIB cable receptacle

8 HI Sense Terminal (also 4-wire Ω)

9 LO Sense Terminal (also 4-wire Ω)

10 HI Input terminal

11 LO Input terminal

12 Current Input terminal

13 External Trigger terminal

14 VM Comp (reading complete) terminal

10 34410A/11A User’s Guide

The Display at a Glance

For a complete description of the front panel displays and

annunciator indications, see “Front Panel Display" on

page 39, and“Annunciators" on page 41.

The following key refers to the primary front- panel display.

1 Primary Display Line

2 Secondary Display Line

3*Annunciator (on during a measurement)

4Hi-Z (high input impedance) Annunciator

5OComp (offset compensation) Annunciator

6ManRng (manual ranging) Annunciator

7Trig (wait-for-trigger state) Annunciator

8Hold (reading hold) Annunciator

9Remote (remote interface operation) Annunciator

10 Error (detected error) Annunciator

11 Null (null function enabled) Annunciator

12 Shift (shift key just pressed) Annunciator

13 Math (dB or dBm function enabled) Annunciator

14 Stats (statistics functions enabled) Annunciator

15 Limits (limit test function enabled) Annunciator

16 Rear Annunciator

17 4W (four-wire ohms or temperature) Annunciator

18 (continuity test function enabled) Annunciator

19 (diode check function enabled) Annunciator

Andere Handbücher für 34410A

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Agilent Technologies Multimeter Handbücher

Agilent Technologies

Agilent Technologies U1251A Handbuch

Agilent Technologies

Agilent Technologies Agilent 8163A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 3458A Kurzanleitung

Agilent Technologies

Agilent Technologies U3401A Bedienungsanleitung

Agilent Technologies

Agilent Technologies U1270 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies Agile or Elusive Signals Using Handbuch

Agilent Technologies

Agilent Technologies U1251A Bedienungsanleitung

Agilent Technologies

Agilent Technologies U1242A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 34405A Handbuch

Agilent Technologies

Agilent Technologies U1253B Handbuch

Agilent Technologies

Agilent Technologies L4411A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 3458A Gebrauchs- und Pflegehandbuch

Agilent Technologies

Agilent Technologies 34410A Bedienungsanleitung

Agilent Technologies

Agilent Technologies U1253B Bedienungsanleitung

Agilent Technologies

Agilent Technologies 34405A Bedienungsanleitung

Agilent Technologies

Agilent Technologies U2741A Bedienungsanleitung

Agilent Technologies

Agilent Technologies U1251B Handbuch

Agilent Technologies

Agilent Technologies U1241B Bedienungsanleitung

Agilent Technologies

Agilent Technologies U1231A Bedienungsanleitung

Agilent Technologies

Agilent Technologies U1273A Bedienungsanleitung

Agilent Technologies

Agilent Technologies U1231A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 8153A Bedienungsanleitung

Agilent Technologies

Agilent Technologies E1326B Bedienungsanleitung

Agilent Technologies

Agilent Technologies 34405A Handbuch

Beliebte Multimeter Handbücher anderer Marken

Fluke

Fluke 83 Bedienungsanleitung

Hameg

Hameg HM 8012 Bedienungsanleitung

Mastech

Mastech MY70 Bedienungsanleitung

Steren

Steren MUL-300 Bedienungsanleitung

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Bedienungsanleitung

PeakTech

PeakTech 4000 Gebrauchs- und Pflegehandbuch

YOKOGAWA

YOKOGAWA 90050B Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Bedienungsanleitung

Fluke

Fluke 8846A Bedienungs- und Wartungshandbuch

Tempo Communications

Tempo Communications MM200 Bedienungsanleitung

Elenco Electronics

Elenco Electronics CM-1555 Bedienungsanleitung

Mastech

Mastech MS8238C Bedienungsanleitung

SDAR

SDAR 830A, 830B, 830D, 830C Bedienungsanleitung

RS PRO

RS PRO RS-9519BT Bedienungsanleitung

BGS technic

BGS technic 8890 Bedienungsanleitung

Amprobe

Amprobe Hexagon 60 Bedienungsanleitung

Morris

Morris 57074 Bedienungsanleitung