Agilent Technologies 16191A Bedienungsanleitung

The test & measurement

equipment you need at

the price you want.

Alltest carries the world’s largest selection of

used/refurbished benchtop test & measurement

equipment at 50% the price of new.

Our equipment is guaranteed working, warrantied, and

available with certified calibration from our in-house staff

of technicians and engineers.

• 10+ full time technicians with over 150 years of

specialization

• 90 day warranty & 5 day right of return on all

equipment

•

• 1-3 year warranties for new and

premium-refurbished equipment

• Every unit tested to OEM specifications

• Satisfaction guaranteed

You have plans, we will help you achieve them.

Any project. Any budget.

Get a quote today!

CCall (732) 919-3339 or email sales@alltest.net.

Alltest Instruments, Inc.

500 Central Ave.

Farmingdale, NJ 07727

P: (732) 919-3339

F: (732) 919-3332

alltest.net

sales@alltest.net

Agilent 16191A Side Electrode SMD T

est Fixture

Operation and Service Manual

Agilent Part No. 16191-90040

Printed in JAPAN May 2003

Sixth Edition

Notice

The information contained in this document is subject to change without notice

This document contains proprietary information that is protected by copyright. All rights are

reserved. No part of this document may be photocopied, reproduced, or translated to another

language without the prior written consent of the Agilent T

echnologies.

Agilent T

echnologies Japan, Ltd.

Component T

est PGU-Kobe

1-3-2, Murotani, Nishi-ku, Kobe-shi,

Hyogo

,651-2241 Japan



Manual Printing History

The manual printing date and part number indicate its current edition. The printing date

changes when anew edition is printed. (Minor corrections and updates that are incorporated

at reprint do not cause the date to change.) The manual part number changes when extensive

technical changes are incorporated.

December 1993

::::::

::::::::::::::::::::: ::::

:::

First Edition (part number: 16191-90000)

June 1996

:::::: :: :: :::::::::::::::::::

:::: :: ::::::

Second Edition (part number: 16191-90010)

December 1999

::::

:::::::::::::::::::::::

:::

Third Edition (part number: 16191-90010)

September 2000

:::::: :: :::::::::::::::::::::

:::: :: ::

orth Edition (part number: 16191-90020)

ugust 2001

:::

:::::::::::::::::::::::

:::::::::::

Fifth Edition (part number: 16191-90030)

May 2003

:::: :::::::::::::::::::::

:::::::::::::

Sixth Edition (part number: 16191-90040)

iii

Safety Summary

The following general safety precautions must be observed during all phases of operation,

service

,and repair of this instrument. F

ailure to comply with these precautions or with specic

ARNINGS

given elsewhere in this manual violates safety standards of design, manufacture,

and intended use of the instrument.

The A

gilent T

echnologies assumes no liability for the customer's failure to comply with these

requirements

DO NOT Operate In An Explosive Atmosphere

Do not operate the instrument in the presence of ammable gasses or fumes

.Operation of any

electrical instrument in such an environment constitutes asafety hazard.

eep A

way From Live Circuits

Operating personnel must not remove instrument covers

. Component replacement and internal

adjustments must be made by qualied maintenance personnel. Do not replace components

with the power cable connected. Under certain conditions

, dangerous voltages may exist even

with the power cable removed. T

oavoid injuries

,always disconnect power and discharge

circuits before touching them.

DO NOT Service Or A

djust Alone

Do not attempt internal service or adjustment unless another person, capable of rendering rst

aid and resuscitation, is present.

DO NOT Substitute P

arts Or Modify Instrument

Because of the danger of introducing additional hazards

,do not substitute parts or perform

unauthorized modications to the instrument. Return the instrument to aAgilent T

echnologies

Sales and Service Oce for service and repair to ensure the safety features are maintained.

Dangerous Procedure Warnings

Warning

s, such as the example below

,precede potentially dangerous procedures throughout

this manual. Instructions contained in the warnings must be followed.

Warning

Dangerous voltages

,capable of causing death, are present in this

instrument. Use extreme caution when handling, testing, and adjusting

this instrument.

The voltage levels found in this test xture when used with the intended instruments do not

warrant more than normal safety precautions for operator safety

Operating Precaution

Do not exceed the operating input power, voltage, and current level and signal type

appropriate for the instrument being used, refer to your instrument's operation manual.

Caution

Electrostatic discharge (

esd

)candamage the highly sensitive microcircuits in

your instrument. ESD damage is most likely to occur as the test xtures are

being connected or disconnected. Protect them from ESD damage by wearing a

grounding strap that provides ahigh resistance path to ground. Alternatively

ground yourself to discharge any static charge built-up by touching the

outer shell of any grounded instrument chassis before touching the test port

connectors

Never touch the test clip contacts

Use awork station equipped with an anti-static work surface

Certication

Agilent T

echnologies certies that this product met its published specications at the time

of shipment from the factory

.Agilent T

echnologies further certies that its calibration

measurements are traceable to the United States National Institute of Standards and

echnology

,to the extent allowed by the Institution's calibration facility

,or

to the calibration

facilities of other International Standards Organization members

arranty

This Agilent T

echnologies instrument product is warranted against defects in material and

workmanship for aperiod of one year from the date of shipment, except that in the case of

certain components listed in

Instrument Specications

of this manual, the warranty shall be

for the specied period. During the warranty period, Agilent T

echnologies will, at its option,

either repair or replace products which prove to be defective

For warranty service or repair

, this product must be returned to aservice facility designated by

Agilent T

echnologies. Buyer shall prepay shipping charges to Agilent T

echnologies and Agilent

echnologies shall pay shipping charges to return the product to Buyer

.However

,Buyer shall

pay all shipping charges

, duties

, and taxes for products returned to Agilent T

echnologies from

another country

Agilent T

echnologies warrants that its software and rmware designated by Agilent

Technologies for use with an instrument will execute its programming instruction when

property installed on that instrument. Agilent T

echnologies does not warrant that the operation

of the instrument, or software

,orrmware will be uninterrupted or error free

Limitation Of Warranty

The foregoing warranty shall not apply to defects resulting from improper or inadequate

maintenance by Buyer

,Buyer-supplied software or interfacing, unauthorized modication or

misuse

,operation outside of the environmental specications for the product, or improper site

preparation or maintenance

No other warranty is expressed or implied. A

gilent T

echnologies specically disclaims the

implied warranties of merchantability and tness for a particular purpose

Exclusive Remedies

The remedies provided herein are buyer's sole and exclusive remedies. Agilent T

echnologies

shall not be liable for any direct, indirect, special, incidental, or consequential damages

whether based on contract, tort, or any other legal theory

Assistance

Product maintenance agreements and other customer assistance agreements are available for

Agilent T

echnologies products.

or any assistance

,contact your nearest Agilent T

echnologies Sales and Service Oce

ddresses are provided at the back of this manual.

Safety Symbols

General denitions of safety symbols used on equipment or in manuals.

Instruction manual symbol: the product is marked with this symbol when it is

necessary for the user to refer to the instruction manual in order to protect

against damage to the instrument.

Indicates dangerous voltage (terminals fed from the interior by voltage

exceeding 1000 volts must be so marked).

Protective conductor terminal. F

or protection against electrical shock in case

of afault. Used with wiring terminals to indicate the terminal which must be

connected to ground before operating equipment.

Low-noise or noiseless, clean ground (earth) terminal. Used for asignal

common, as well as providing protection against electrical shock in case of

fault. Aterminal marked with this symbol must be connected to ground in the

manner described in the installation (Operation) manual, and before operating

the equipment.

Frame or chassis terminal. Aconnection to the frame (chassis) of the

equipment which normally includes all exposed metal structures

Alternating current (power line).

Direct current (power line).

Alternating or direct current (power line).

arning

denotes ahazard. It calls attention to aprocedure, practice

,condition

or the like

,which, if not correctly performed or adhered to,could result in

injury or death to personnel.

Caution

sign denotes ahazard. It calls attention to aprocedure

,practice

condition or the like

, which, if not correctly performed or adhered to

,could

result damage to or destruction of part or all of the product.

Note

denotes important information. It calls attention to a procedure

,practice

condition or the like

,which is essential to highlight.

vii

APC-7



is a U.S. registered trademark of the Bunker Ramo Corporation.

viii

Contents

1. General Information

Introduction ..................

.........1-1

Manual Summary ................... .. .. ......1-1

Product Description ................... ..

......1-1

Applicable Instruments .....................

.....1-1

Options A

vailable .................... .. ........1-2

ccessories Supplied ..............

...........1-2

Specications ................

............1-3

Supplemental P

erformance Characteristics ...............

.1-3

Residual Inductance of the Shorting Bar ..................

..1-4

2. Preparation for Use

Introduction ................

...........2-1

Initial Inspection ................... ............2-1

Connecting the T

est Fixture for Use .............. ........2-3

Repackaging the T

est Fixture F

or Shipment ...........

.....2-4

Measurement Error Correcting Function for Each Instrument ..........2-4

3. Operation

Introduction ..............

...................3-1

Operating Flow .............

..................3-1

Overview ........ ....................... .. .3-2

How to set the SHORT condition, and the OPEN condition ...........3-3

Setting the SHORT condition ..... ...................3-3

Setting the OPEN condition . ..

.....................3-5

How to connect the DUT .... .. ..................... 3-6

djusting the Pressure Arm Stroke . .... .................3-7

4. Service

Introduction ..

............... .. .. .. .. .. 4-1

General Information .......

............

..........4-1

Assembly Replacement . . . . . . . . . . . . ................ 4-3

Disassembly and Assembly Procedure . . . . . . . . . . . . . . . . . . . . 4-3

Test Stage, Pressure Arm, and Locking Arm Assembly Removal: .... .. 4-3

Replaceable P

arts ......................

....... 4-4

Troubleshooting .........................

...... 4-10

Open Impedance Check .......................... 4-10

Short Impedance Check ........

... . .. .. .. .. .. .. .. 4-10

Short Impedance Repeatability Check . . . . . . . . ............ 4-11

Contents-1

Inhaltsverzeichnis

Andere Agilent Technologies Prüfgeräte Handbücher

Agilent Technologies

Agilent Technologies 16442A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 8960 Series 10 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 54600 Series Handbuch

Agilent Technologies

Agilent Technologies Keysight N9310A Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT N4901A Bedienungsanleitung

Agilent Technologies

Agilent Technologies N4010A Bedienungsanleitung

Agilent Technologies

Agilent Technologies e6601a Bedienungsanleitung

Agilent Technologies

Agilent Technologies auroraSonata Bedienungsanleitung

Agilent Technologies

Agilent Technologies N9360A Betriebsanleitung

Agilent Technologies

Agilent Technologies 8922M Bedienungsanleitung

Agilent Technologies

Agilent Technologies DSO-X-2024A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 54641A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5530 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 16452A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 3000 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies Ininiium 9000 Bedienungsanleitung

Agilent Technologies

Agilent Technologies Agilent 34980A Montage- und Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfiniiVision 4000 X-Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies E6001A Bedienungsanleitung

Agilent Technologies

Agilent Technologies E5035A Bedienungsanleitung

Agilent Technologies

Agilent Technologies Medalist x6000 Technische Daten

Agilent Technologies

Agilent Technologies E840 A Series Installations- und Betriebshandbuch

Agilent Technologies

Agilent Technologies E4406A Bedienungsanleitung

Agilent Technologies

Agilent Technologies Infinium DCA 86100A Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung

Ritmix

Ritmix RAT-701 Bedienungsanleitung