Agilent Technologies Medalist i3070 Series 5i Handbuch

Medalist i3070 Series 5i

Inline ICT System

Operator Guide

Notices

No part of this manual may be reproduced

in any form or by any means (including

electronic storage and retrieval or

translation into a foreign language) without

prior agreement and written consent from

Agilent Technologies, Inc. as governed by

United States and international copyright

laws.

Manual Part Number

E9988-90001

Edition

First edition, December 2013

Printed in Malaysia

Agilent Technologies Microwave Products

(Malaysia) Sdn. Bhd.

Bayan Lepas Free Industrial Zone

11900 Penang, Malaysia

Warranty

The material contained in this document is

provided “as is,” and is subject to being

changed, without notice, in future editions.

Further, to the maximum extent permitted

by applicable law, Agilent disclaims all

warranties, either express or implied, with

regard to this manual and any information

contained herein, including but not limited

to the implied warranties of

merchantability and fitness for a particular

purpose. Agilent shall not be liable for

errors or for incidental or consequential

damages in connection with the furnishing,

use, or performance of this document or of

any information contained herein. Should

Agilent and the user have a separate

written agreement with warranty terms

covering the material in this document that

conflict with these terms, the warranty

terms in the separate agreement shall

control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a

license and may be used or copied only in

accordance with the terms of such license.

Restricted Rights Legend

If software is for use in the performance of

a U.S. Government prime contract or

subcontract, Software is delivered and

licensed as “Commercial computer

software” as defined in DFAR 252.227-7014

(June 1995), or as a “commercial item” as

defined in FAR 2.101(a) or as “Restricted

computer software” as defined in FAR

52.227-19 (June 1987) or any equivalent

agency regulation or contract clause. Use,

duplication or disclosure of Software is

subject to Agilent Technologies’ standard

commercial license terms, and non-DOD

Departments and Agencies of the U.S.

Government will receive no greater than

Restricted Rights as defined in FAR

52.227-19(c)(1-2) (June 1987). U.S.

Government users will receive no greater

than Limited Rights as defined in FAR

52.227-14 (June 1987) or DFAR

252.227-7015 (b)(2) (November 1995), as

applicable in any technical data.

Safety Notices

A CAUTION notice denotes a hazard. It

calls attention to an operating procedure,

practice, or the like that, if not correctly

performed or adhered to, could result in

damage to the product or loss of important

data. Do not proceed beyond a CAUTION

notice until the indicated conditions are

fully understood and met.

A WARNING notice denotes a hazard. It

calls attention to an operating procedure,

practice, or the like that, if not correctly

performed or adhered to, could result in

personal injury or death. Do not proceed

beyond a WARNING notice until the

indicated conditions are fully understood

and met.

CAUTION

WARNING

Medalist i3070 Series 5i Inline ICT System

Operator Guide

Safety Information 2

Overview of the System 3

Logging In to the System 4

Production Testing 5

2Operator Guide

Safety Information

Warning and Hazard Labels

Pay attention to the following labels when they appear on the equipment.

Emergency Stop

Table 1 Warning Labels on System

Label Description

DANGER: High Voltage

Do not detach the protective covers. Operating this equipment without

covers may cause electric shock.

WARNING: Moving Parts (General)

Do not touch the equipment while it is running. Keep clear of moving

machinery.

WARNING: Moving Parts (Hand)

Do not touch the equipment while it is running. Keep hands clear of

moving machinery.

WARNING: Pinch Hazard

Do not touch the equipment while it is running. Keep hands away from

the indicated areas to avoid pinched fingers.

In case of emergency, press the red Emergency Stop switch (Figure 1)

to cut off power to the system.

Resetting the Emergency Stop

1Turn the red Emergency Stop switch clockwise to release it.

2Press the Reset button to reset the safety relay and resume

operation.

Operator Guide 3

Overview of the System

Figure 1 Medalist i3070 Series 5i (Left-to-Right System)

Tower Light

Emergency Stop

Main Power Switch

LCD Touch Panel

Switch

Reset Button

Testhead Pod

Zone 2

Zone 1

Controller Pod

Tower Light

Connectors for

Anti-static

Wrist Strap

Green System is running in Auto Mode.

Amber System has stopped. There is no board available or the downstream machine

is busy.

Red System has stopped. There is a defect or error that requires attention.

4Operator Guide

Logging In to the System

administrator.

The Operator Interface starts automatically.

Logging Off

Before you log off, make sure you exit the Operator Interface.

1From the File menu, select Exit.

2In Windows, select Start > Log off.

Operator Guide 5

Production Testing

1From the Operator Interface, click LOAD to automatically load the

testplan for the fixture in use.

2Click START to run the testplan.

On the touch panel, Production mode is automatically set to Auto and

the system is ready to receive a board and begin testing.

The Output area shows the details as the board tests are executed while

the Information area provides a summary:

Stopping the testplan

Click STOP to stop running the testplan.

Wear an anti-static wrist strap at all times when handling PCBs which are susceptible to

damage by electrostatic discharge. Connectors for the wrist strap are provided at the front of

the system (see Figure 1).

CAUTION

Printed in Malaysia

First edition, December 2013

E9988-90001

Optional DUT Access

The optional DUT Access feature pauses the system when a board fails,

allowing the operator to remove the board.

A message will be displayed on the touch panel when a board fails.

1Open the DUT Access window and remove the board from the Zone 2

conveyor.

2Press OK on the touch panel.

3Close the DUT Access window and press OK to lock it.

The system will automatically resume operation.

Andere Handbücher für Medalist i3070 Series 5i

Inhaltsverzeichnis

Andere Agilent Technologies Prüfgeräte Handbücher

Agilent Technologies

Agilent Technologies Infiniium 90000 Q-Series Handbuch

Agilent Technologies

Agilent Technologies InfiniiVision 5000 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies TS-5400 Stücklistenhandbuch

Agilent Technologies

Agilent Technologies J-BERT N4903B Bedienungsanleitung

Agilent Technologies

Agilent Technologies 35670A Bedienungsanleitung

Agilent Technologies

Agilent Technologies U1583A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 54831A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 54620 Series Bedienungs- und Sicherheitshinweise

Agilent Technologies

Agilent Technologies E8285A Bedienungsanleitung

Agilent Technologies

Agilent Technologies N9360A Betriebsanleitung

Agilent Technologies

Agilent Technologies InfiniiVision 3000 X-Series Handbuch

Agilent Technologies

Agilent Technologies InfiniiVision 3000 X- Series Bedienerhandbuch

Agilent Technologies

Agilent Technologies 8922M Bedienungsanleitung

Agilent Technologies

Agilent Technologies N5230-60102 Installations- und Betriebshandbuch

Agilent Technologies

Agilent Technologies Ininiium 9000 Bedienungsanleitung

Agilent Technologies

Agilent Technologies Agilent 34980A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 8935 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 16034H Bedienungsanleitung

Agilent Technologies

Agilent Technologies E6630A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 16452A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 87050A Option K24 Handbuch

Agilent Technologies

Agilent Technologies 54641A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 85056D Handbuch

Agilent Technologies

Agilent Technologies 87511A Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung

Ritmix

Ritmix RAT-701 Bedienungsanleitung

Sealey

Sealey TA130 Bedienungsanleitung