Agilent Technologies InfiniiVision 3000 X- Series Bedienerhandbuch

Quick Demo Guide

InﬁniiVision 3000 X-Series Oscilloscope

Use the scope’s “Auto Demo” mode to quickly demonstrate the following key features

and capabilities of the oscilloscope in two easy steps without requiring an external

demo board:

Auto Demo shows

• Fast waveform update rate

• Mixed signal oscilloscope

• Serial bus decode and trigger

• Segmented memory acquisition

• Mask testing

• WaveGen function generator

Using the “Auto Demo” mode

1. Connect Channel-1 probe between the Demo1 test lug and

ground lug.

2. Connect Channel-2 probe between the Demo2 test lug and

ground lug.

3. Press [Default Setup] front panel key.

4. Press [Help] front panel key.

5. Press Training Signals softkey; then select the CAN

signal from the softkey menu list using the Entry knob.

6. Press Auto Setup softkey.

Easy CAN serial bus decode/trigger using

the built-in “Training Signals”

7. Press [Serial] front panel key; then, press Lister softkey.

8. Press Display softkey; then select Serial 1 (CAN).

9. Set timebase to 200.0 ms/div using Horizontal scale knob.

10. Press [Run/Stop] to stop acquisitions.

11. Press [Search] front panel key; then select Serial 1 (CAN)

from the softkey menu list using Entry knob.

12. Press Search for softkey; then select All Errors.

Search and navigation on CAN errors

The white triangles at the top of the waveform area indicate

the location of each “found” CAN Error Frame . Let’s now

navigate to each CAN Error Frame and take a closer look

at each one.

13. Press the [◄] and [►] front panel navigation buttons to

automatically navigate to each CAN Error Frame.

14. Press Horizontal position knob to set offset to 0 sec.

15. Set timebase to 100.0 μs/div using Horizontal scale knob.

16. Press [Run/Stop] front panel key.

17. Press [Acquire] front panel key.

18. Press Segmented softkey; then select # of Segments =

500 using Entry knob.

19. Press Segmented softkey to begin acquisition.

20. Press [Serial] front panel key; then press Lister softkey.

21. Press Scroll Lister softkey; then use Entry knob to review

all 500 captured frames in the list.

Capturing 500 consecutive CAN frames with

ID = 07F using segmented memory

Segmented memory optimizes oscilloscope acquisition

memory to capture only those events that satisfy the

scope’s trigger condition.

With hardware-based decoding, this scope quickly detects

the occurrence of infrequent CAN error frames. Note that it

is also very easy to demonstrate other serial bus protocols.

Simply select the desired Serial bus training signal, then

press the Auto Setup softkey

Using the “Training Signals” mode for advanced demonstrations

Quick Demo Guide

Product speciﬁcations and descriptions in this document subject to change without notice.

5990-6658EN

1. Press [Default Setup] front panel key.

2. Press the [Help] front panel key.

3. Press the Training Signals softkey; then select the Runt

Pulses from the list using the Entry knob.

4. Press the Output softkey to enable this output signal.

5. Set Channel-1 to 500 mV/div with +1.7V offset using front

panel Channel-1 knobs.

6. Press the Trigger Level knob to set triggering at 50% of the

signal amplitude.

7. Press [Run/Stop] front panel key.

8. Press [Search] front panel key; then select Runt from the

list using the Entry knob.

Parametric violation search

The white triangles at the top of the display indicate the

location of each “found” runt pulse. Let’s now navigate to

each runt and take a closer look at each one..

9. Set timebase to 200.0 ns/div using Horizontal scale

knob.

10. Press the [◄] and [►] front panel navigation buttons to

automatically navigate to each positive “runt” pulse.

11. Press the Copy softkey; then press Copy to Trigger.

12. Press the Horizontal position knob to set offset to

0 seconds.

13. Press [Run/Stop] to begin repetitive acquisitions again.

Parametric violation triggering

Let’s now trigger on these “runts” using the scope’s

automatic “Copy Search to Trigger” feature..

The scope is now triggering on two different positive runt

pulses of different widths as shown in the screen image

above. Let’s now use the scope’s segmented memory acqui-

sition mode to efﬁciently capture 1,000 occurrences of these

positive runt pulses into memory.

Capturing consecutive runt pulses using

segmented memory

14. Press the [Acquire] front panel key.

15. Press the Segmented softkey; then select the # of

segments = 1000 using the Entry knob.

16. Press Segmented softkey to begin acquisition.

17. Press the Current Seg softkey; then use Entry knob to

review all 1000 captured segments that each contain a

runt pulse.

Segmented memory optimizes oscilloscope acquisition

memory to capture only the events that satisfy the scope’s

trigger condition, in this case runt pulses.

www.agilent.com/find/3000X-Series

Andere Handbücher für InfiniiVision 3000 X- Series

Andere Agilent Technologies Prüfgeräte Handbücher

Agilent Technologies

Agilent Technologies N9360A Betriebsanleitung

Agilent Technologies

Agilent Technologies E4406A VSA Series Handbuch

Agilent Technologies

Agilent Technologies U7242A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 16034G Bedienungsanleitung

Agilent Technologies

Agilent Technologies N4010A Bedienungsanleitung

Agilent Technologies

Agilent Technologies E4400-60598 Kurzanleitung

Agilent Technologies

Agilent Technologies E4406A VSA Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 81250 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 16047E Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfiniiVision 7000B Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 8922 Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfiniiVision 6000 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies U3042AE08 Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfiniiVision 5000 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 85056A Handbuch

Agilent Technologies

Agilent Technologies J-BERT N4903 Bedienungsanleitung

Agilent Technologies

Agilent Technologies Infiniium 80000 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5DX II Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 8453 Verdrahtungsschema

Agilent Technologies

Agilent Technologies U1602B Handbuch

Agilent Technologies

Agilent Technologies 54610B Handbuch

Agilent Technologies

Agilent Technologies InfiniiVision 5000 Series Handbuch

Agilent Technologies

Agilent Technologies 93000 SOC Series Installationsanleitung

Agilent Technologies

Agilent Technologies InfiniiVision 3000 X-Series Handbuch

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung

Ritmix

Ritmix RAT-701 Bedienungsanleitung

Sealey

Sealey TA130 Bedienungsanleitung