Agio 99000 Bedienungsanleitung
AGIO INTERNATIONAL COMPANY LTD.
SHUNDE SHIAN FURNITURE INDUSTRIES CO. LTD.
PATIO FURNITURE & ACCESSORIES
ASSEMBLY INSTRUCTIONS
STOP - IMPORTANT
If you have any problems with this product (missing or damaged
parts, assembly issues), please
DO NOT RETURN TO THE RETAILER/STORE
where you purchased the product. Call our Customer Service
Hotline at:
1-800-416-3511
Between 9:00 AM and 5:00 PM Eastern Time, Monday through
Friday
Or visit our website at: www.agio-usa.com
To expedite any future warranty claims, retain the instruction sheet,
warranty card, and receipt for future use. you are encouraged to
register your purchase on our website at www.agio-usa.com
For additional online video support on assembly, troubleshooting,
and care and maintenance of your outdoor furniture, please visit our
website at: www.agio-usa.com/support
1
ASSEMBLY INSTRUCTIONS
WARNING
Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
An LP-cylinder not connected for use
shall not be stored in the vicinity of this
or any other appliance.
DANGER
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. If odor continues, keep away from
the appliance and immediately call
your gas supplier or fire department.
WARNING:
USE FACTORYAPPROVED
REPLACEMENT PARTS AND
ACCESSORIES ONLY. USE
OF UNAPPROVED PART OR
ACCESSORIES CAN VOID
THE WARRANTY ON THIS
PRODUCTAND RESULT IN
AHAZARDOUS CONDITION.
PLEASE CONTACT US FOR
INFORMATION REGARDING
REPLACEMNT
HOSES,THERMOCOUPLES,
ELECTRODES,IGNITION
MODULES,LAVAROCKS,LO
GS, FIRE ICE, ETC.
WARNING:
Improper installation, adjustment alteration,
service or maintenance can cause injury or
property damage. Read the installation,
operating and maintenance instructions
thoroughly before installing or servicing this
equipment.
FOR USE WITH 20LB (9KG) PROPANE
CYLINDER WITH TYPE 1 CONNECTION OR FOR
USE WITH NATURAL GAS AFTER CONVERSION
KIT IS INSTALLED (MUST BE PROFESSIONALLY
INSTALLED) ALSO THE LP REGULATOR MUST
BE SUPPLIED BY THE MANUFACTURER.
Dec-01-2014
Installer: Leave these instructions with consumer.
Consumer: Keep these instructions for future reference.
WARNING: For Outdoor Use Only
Questions, Problems, Missing Parts? Before returning to
your retailer, call our customer service department in the
US and Canada at 1-800-416-3511, Monday-Friday, 9 a.m.–
5 p.m.Eastern Time.
Thi
s app
li
ance can pro
d
uce car
b
on
monoxide which has no odor.
Using it in an enclosed space can kill
you.
Never use this appliance in an enclosed
space such as a camper, tent, car or
home.
DANGER CARBON MONOXIDE HAZARD
CSA Model 99000
A
RL00100
2
TABLE OF CONTENTS
Important Safety Information 3
Important About Propane 4
Specification 4
Parts Identification List 5-6
Installation 7-11
Batteries 11
Lighting Instructions 12
Maintenance 12-13
Troubleshooting Guide 13
Warranty 14
3
IMPORTANT SAFETY INFORMATION
The installation must conform with local codes or, in the absence of local codes, with the
National Fuel Gas Code, ANSI Z223.1/NFPA 54; International Fuel Gas Code. ; Natural
Gas and Propane Installation Code, CSAB149.1; or Propane Storage and Handling Code,
B149.2, as applicable.
The appliance must be isolated from the gas supply piping system by closing its
equipment shutoff valve during any pressure testing of the gas supply system at test
pressure equal to or less than 1/2 psi (3.5kPa).
The appliance area must be kept clear and free from combustible materials, gasoline and
other flammable vapors and liquids.
Do not use this appliance if any part has been under water. Immediately call a qualified
service technician to inspect the appliance and to replace any part of the control system
and any gas control which has been under water.
Children and adults should be alerted to the hazards of high surface temperatures
and kept at a safe distance to avoid burns or clothing ignition.
Young children should be carefully supervised when they are anywhere near the
appliance.
Clothing or other flammable material should not be hung from the appliance, or
placed on or near the appliance.
Any screen or guard removed for servicing an appliance must be replaced prior to
operating the appliance.
Installation and repair should be done by a qualified service person. The appliance
should be inspected before use and at least annually by a professional service
person. More frequent cleaning may be required as necessary. It is imperative that
the control compartments, burners and circulating air passageways of the
appliance be kept clean.
Do NOT burn solid fuels in this gas fireplace.
CAUTION: The propane gas pressure regulator provided with this appliance must be
used. This regulator is set for an outlet pressure of 11 inches water column.
This outdoor gas appliance is not intended to be installed in or on recreational vehicles
and/or boats.
Before each use of this gas appliance, open the LP (Liquid Propane) Tank Drawer and
inspect the LP Hose. If there is evidence of excessive abrasion or wear, or the hose is cut,
it must be replaced prior to the gas appliance being put into operation. Use only the
replacement hose assembly specified in this manual. Inspect the burner before each use
of the appliance. The burner must be replaced prior to the appliance being put into
operation if it is evident that the burner is damaged. Use only the burner listed in these
instructions.
Keep the fuel supply hose away from any heated surfaces.
4
IMPORTANT SAFETY INFORMATION ABOUT
PROPANE (LP) GAS
A self contained LP-gas cylinder for use with this appliance must have a
capacity of 20 lbs. and must be equipped with a Type 1 connector and an OPD
(overfill protection device). See Figure 1.
The LP-gas supply cylinder to be used must be constructed and marked in
accordance with the specification for LP-gas cylinders of the U.S. Department
of Transportation (DOT) or the National Standard of Canada, CAN/CSA-B339,
Cylinder, Sphere and Tubes for the Transportation of Dangerous Goods.
The cylinder supply system must be arranged for vapor withdrawal.
The cylinder used must include a collar to protect the cylinder valve.
This appliance shall be used only outdoors in a well-ventilated space and
shall not be used in a building, garage or any other enclosed space.
When this appliance is not is use, the gas must be turned off at the supply
cylinder.
Storage of this appliance indoors is permissible only if the cylinder is
disconnected and removed from the appliance.
Cylinders must be stored outdoors in a well-ventilated area out of the
reach of children .Disconnected cylinders must have threaded valve plugs
tightly installed and must not be stored in a building, garage or any other
enclosed areas.
CSA (Canadian Standards Association) certified to ANSI Z21.97•CSA
2.41-2012 “ Outdoor Decorative GasAppliances”
Figure1
SPECIFICATIONS
INPUT 40,000 Btu/hr 30,000 Btu/hr Low fire
Propane Regulator Pressure 11 inches water column
Clearances to combustible
surfaces Sides 24in./61cm Top: 72 in. / 183 cm
5
PARTS IDENTIFICATION LIST
PART DESCRIPTION PART# QTY
A CONTROL KNOB FP1245 1
B GAS VALVE FP0307 1
C THERMOCOUPLE FP0004 1
D LP REGULATOR
HOSE 65-FP-0181 1
E ELECTRODE 65-FP-0128 1
F ORIFICE ELBOW FP0310 1
G IGNITION MODULE FP0006 1
H PROPANE
ORIFICE ZCF0021 1
I “AAA”
BATTERY(1.5V) HW0705 1
J LAVA ROCK SET FP0002 1
K FOOTCAP FC0559 4
L 1/4" X 15 MM BOLT HW0034 8
M 1/4" X 20 MM BOLT HW0036 4
N 1/4" X 40 MM BOLT HW0086 4
O BOLT COVER HW0105 18
P Ø6.5 X 1.0 MM
WASHER HW0004 14
Q Ø18XØ6.5 X1.5MM
WASHER HW0103 4
R NUTS HW0717 2
S HEX BOLT DRIVER HW0006 1
T HEX WRENCH HW0008 1
6
U FIREPIT TABLE
TOP 1
V
BACK PANEL 1
W
LEFT SIDE
PANEL 1
X
RIGHT SIDE
PANEL 1
Y
DOOR PANEL 1
Z MIDDLE SUPPORT 1
AA
LP SUPPORT 1
BB BOTTOM/ TOP
CONNECTOR 1
7
INSTALLATION
1.Identify parts packed in carton against the parts list. Remove all protective materials and
set parts on a flat, non-abrasive surface.
2. Attach the back panel to the side panels by using four 1/4"x40 mm bolts and washers
as shown in Figure 2.Guide the bolts through the holes in back panel, into the pre-drilled
holes in the side panels. Hand tighten only.
Figure 2
3. Attach the middle support to the side panels by using four 1/4"x15 mm bolts and
washers as shown in Figure 3.Guide the bolts through the holes in the middle support, into
the pre-drilled holes in the side panels. Hand tighten only.
Figure 3
4. Attach the "L" connector to right side panel by using a 1/4"x15 mm bolt and washer as
shown in Figure 4.Guide the bolt through the hole in the "L" connector, into the pre-drilled
hole in the right side panel. Do not over tighten.
Figure 4
8
5. Put the door onto the bottom connector, guide the pin in the bottom connector into the
hole on the underside of the door. Then guide the pin on the top connector into the hole in
the topside of the door, use a 1/4"x15 mm bolt and washer to attach this top connector to
the right side panel as shown in Figure 5. Do not over tighten.
Figure 5
6. With the help of another person, carefully place the table top onto the table base. After
making any necessary adjustments to the alignment of the table top and the assembled
base, use four 1/4"x20 mm bolts and washers as shown in Figure 6.Guide the bolts
through the holes in the base, into the pre drilled holes in the table top. Do not tighten
completely.
Figure 6
9
7. Attach the LP support the to door panel by using four 1/4"x15 mm bolts and washers as
shown in Figure 7. Do not over tighten.
Figure 7
8. Place gas tank onto the LP support as shown in Figure 8.
9. Attach the metal ring ( as shown in Figure 9) pre-fitted with gas hose which is
connected to the table top , into the hole of the door panel, then use hex bolt driver to
screw 1/4"x5mm nut , the gas tank has fixed as shown in Figure 9a. Connect the regulator
as shown in Figure.10 Screw the black handle clock-wise to tighten. Turn the handle
counter clock-wise to remove. The hose must point down. Check that the valve is turned
all the way clockwise to the "OFF" position.
Figure 8
Andere Handbücher für 99000
1
Inhaltsverzeichnis
