AIBLUE GoFindMe Einrichtungshandbuch
Online Manual
Welcome
GoFindMe GPS Tracker gives you a complete solution of tracking, locating and communicating even with no network service. It’s perfect
for hiking, camping, or any other outdoor activities and family use. Please read this instruction carefully so that you can make full use of
GoFindMe.
GoFindMe Device Introduction
Power Button
Press the power button for more than 3 seconds to turn on/off GoFindMe device. There will be a beep sound when the device is turned on.
SOS Button
Press the SOS button for more than 3 seconds to activate/deactivate SOS mode.
USB Charging Port
Charge the GoFindMe device by connecting it to a PC USB port, a mobile phone adapter, or a portable charger via the Micro USB cable.
LED Indicator Light
Activity
Status
LED Light
Charging
Battery 0-99%
Green, breathing
Battery 100%
Green, always on
Connection
Connected with GoFindMe
App
Blue, lights for 3s
Working
Normal Status
Green, blinks every 10s
SOS
SOS Mode Activated
Red, blinks every 0.5s
SOS Mode Deactivated
Green, blinks every 0.5s;
lasts 5s
Speaker
Play voice messages, device beeps, and SOS alerts if there is any.
Specifications
Dimensions: 130mm*36mm*17mm
Weight: 85g (battery included)
Transmit power: < 1W
Bandwidth: 500 KHz
Frequency Band: 902-928 MHz (US), 869.4-869.65 MHz (EU)
Battery: Built-in 1000 mAh Li-Battery
Charge interface: Micro USB
Input: 5V/1A
Working temperature: -20°C-60°C
Protection: IP67 waterproof, dustproof and shockproof
Mobile device connection: Bluetooth Low Energy Communication
App compatibility: iOS 10.0 or later & Android 5.0 or later
GoFindMe App Main Features
1.Download App
- Scan the QR code to download the App.
- Search “GoFindMe” in Google Play Store or App Store to download the App.
2.Pair with GoFindMe
- Turn on your GoFindMe device.
- Enable Bluetooth on your phone.
- Open GoFindMe App and then it will automatically scan and list the nearby devices. Please select your device to connect.
- Or you can tap the icon to complete the connection.
3.App Main Screen
Once launched, the app will show you the map of your current location by default. And you can find all the features and the real-time
location of all groupmates on this default interface.
4.Groupmates Management
When you turn on the GoFindme device, It automatically connects to other GoFindMe devices nearby without extra settings.
Tap the icon on the upper left of main screen to enter the Groupmates Management interface.
- You can check the status of all groupmates on the list.
- Tap “Rename” to change to a nickname or an alias for easier recognition.
- Tap “Locate” to check the real-time location of any groupmate.
5.Tracking
5.1 Real-time Tracking
You can check the real-time location of any groupmate on the map. You can also check your movement direction.
- Tap the icon of any groupmate on the main screen to check the device battery, the distance, and the time of last location update for
that person.
- Tap the icon on the upper right to check the trace records. You can also turn on/off the trace records there.
5.2 Anti-lost Alert
- If there are no messages or location updates from any other groupmates over 15 minutes, GoFindMe App will alert you and your
groupmates that you may be left behind.
- If the location of a groupmate has not been updated over 15 minutes and there are no messages from this groupmate either, GoFindMe
App will prompt you that this mate may have got lost.
5.3 Location Update Frequency
The location will be updated at a fixed frequency. You can set the location update frequency in settings according to your needs.
- Tap the icon at the bottom of the main screen to enter the general settings interface.
- Tap “Location Update”.
- Select the update frequency according to your preference.
Note: What is the Real-Time mode in App and when should I use it?
You can customize the location update frequency through the App, selecting from 600S, 60S, 30S, 10S, or Real-Time. Real-Time mode
refers to instant location updates. The higher the update frequency is, the more accurate location information you will get, but meanwhile
the battery drains faster.
Normally, we suggest choosing the 10S mode (the default Location Update Frequency), which would be enough for most practical needs.
However, if you need to enable the Real-Time mode in some cases, we suggest:
- Only enable the device that needs to be tracked in real time to prevent communication conflict.
- Make sure there is enough battery of the device in advance to prevent losing connection due to low battery.
For example, if you want to track real-time location of your kid, we suggest:
1) For the GoFindMe your kid takes: Connect it with your phone and enable the Real-Time mode.
2) For the GoFindMe you take: Connect it with your phone but only use the default 10S mode.
6.Message
Tap the icon at the bottom of the main screen to send text messages, built-in voice messages, real-time locations, or SOS messages
to your groupmates.
6.1 Text Message
- Type your message and tap the icon to send.
6.2 Voice Message
- Tap the icon to open the built-in voice messages list.
- Select the built-in voice message you want to send.
- Select the recipient on the list and tap “Send”.
Note: The recipient can hear the voice message from GoFindMe device and check the details of the voice message on GoFindMe App.
6.3 Real-time location
- Tap the icon to send your real-time location.
6.4 SOS
If in an emergency, you can activate the SOS mode. Then every groupmate will receive the SOS alert via both GoFindMe device and the
App.
- Tap the icon to activate the SOS mode and send out the SOS message automatically to all groupmates.
- Tap the icon again to deactivate the SOS mode if you need to cancel it.
- If you receive an SOS message, you will get an interface as below.
- Tap “View” to check the accurate coordinate, distance, and direction of this groupmate who sent the SOS message.
- Tap the icon to check the trace and find this groupmate faster.
Inhaltsverzeichnis
