Usage and Maintenance Instructions Ver. 2 07/2012 (2234)
2
INTRODUCTION
Thank you for deciding to purchase the Scooter Weather Protection Cover from
Aidapt. The Scooter Weather Protection Cover is manufactured from the finest
materials available. When used correctly it is designed to give many years of
reliable, trouble-free service.
NB. This equipment must be installed by a competent person.
BEFORE U E
Carefully remove all packaging. Avoid using any knives of other sharp instruments
as this may damage the item.
Check the product for any visible damage f you see any damage or suspect a fault,
do not use your product, but contact your supplier for support.
INTENDED U E
The Scooter Weather Protection Cover provides head to toe protection from the
elements. t can be put on or taken off with ease and features a snug fitting hood
ensuring top to toe protection.
FITTING IN TRUCTION
The Scooter Weather Protection Cover can easily be slipped on and off then
adjusted as necessary:
•Unzip the neck opening fully
•Put the Scooter Weather Protection Cover on over the head and shoulders,
like a jumper/sweater
•Pull the Scooter Weather Protection Cover down over the knees to the
front, with the elasticated rear of the cover over the back of the scooter
•The cuffs of the sleeves are elasticated for a comfortable fit
•The neck opening can be zipped up or down as desired and the hood can
be raised and tied for complete weather protection
CLEANING
Clean your Scooter Weather Protection Cover using a mild detergent with a slightly
damp, soft cloth only. Only use a mild detergent or disinfectant; never use an
abrasive cleaner.
The Scooter Weather Protection Cover can be cleaned in a washing machine at a
low temperature, ideally on a wool or delicates setting.
After cleaning, hang the Cover somewhere warm and dry to air. Do not leave in
direct contact with a heat source and do not put in a tumble dryer.
