AIO CM1-AIO Bedienungsanleitung
Instruction of use
Model: CM1-AIO
AIO - Instruction of use
Version 2, Date: 16.06.2020
TABLE OF CONTENT
1. Introduction 3
1.1. Ozonation- AIR 3
1.2. Ozonation - WATER 4
1.3. Ionization 4
1.4 Aromatherapy 4
1.5 Ultrasonic Humidification 4
2. Packing List 5
3. Technical Parameters 5
4. Installation & Settings 6
4.1 Device Installation 6
4.2 How to set a device? 6
4.3 Control buttons 8
4.3.1 DESCRIPTION OF CONTROL ELEMENTS 8
4.3.2 DESCRIPTION OF FUNCTIONS 8
4.3.3 HOW TO SET A TIME OF OZONATION? 9
ITEM OZONATION 10
WATER OZONATION 11
5. Safety Regulations 13
5.1. Basic Information 13
5.2. Symptoms of ozone poisoning 13
5.3. Safety notes 13
5.4 Label description 14
6. Troubleshooting 14
7. Ozonation process 14
7.1 Room preparation before ozonation 14
7.2 Setting up the device 15
7.3 Process Monitoring 15
7.4 Finishing the Ozonation 15
7.5 General Tips 15
7.6 “How long should the process last?” 15
7.7 Mold removal 15
7.8 Warnings 15
8. Other uses 16
9. General conditions 16
9.1 Warranty 16
9.2 Repair services 17
9.3 Contact 17
AIO - Instruction of use, Version 2, Date: 16.06.2020 2/16
Copyright
The instruction of use is protected by copyright and all rights are reserved.
The content of this manual may be changed without notice to improve the quality.
© 2020 CM International S.A.
CM International S.A. is the owner of the copyright of the instruction manual.
Trade name of the device: AIO
Reproduction of this manual in part or in whole or reproduction in other media without the
express written permission of CM International S.A is prohibited.
Copies resulting from the consent of the copyright owner must contain the content in an
unchanged form and the same copyright information that has been placed on the original.
Ownership of all other trademarks is attributed to their owner.
This Instruction of Use was issued on 16.06.2020 - Version 2.
1. Introduction
AIO is a modern device designed to purify air and water. Ozone has disinfecting properties. It
kills bacteria, viruses, fungi, allergens, mites and unpleasant odors. One device can provide
a whole new dimension of comfort in your interior.
It is a portable device with 3 options:
- Aromatherapy
- Ionization
- Ozonation
What’s more, you can also use it as ultrasonic humidifier.
Thanks to this device you can ozone air and water, ionize the air, use a humidifier or add
your favorite oils and enjoy aroma therapy.
1.1. Ozonation- AIR
Ozone treatment, so called ozonation, is a method of disinfection without chemicals where
the biocidal factor is ozone, a gas with strong oxidizing properties. Ozone treatment is an
ideal way anywhere in the immediate human environment is required for microbiological
purity and sterility and to obtain an environment free from undesirable odors and various
pathogens.
AIO - Instruction of use, Version 2, Date: 16.06.2020 3/16
NOTE
DO NOT OPEN! ELECTRIC SHOCK HAZARD!
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE
HOUSING. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL
Ozonation is an excellent and environmentally friendly method that not only sterilize areas
where you are but will let you get rid of any unwanted odors from your surroundings.
Ozonation is a safe method, and its main advantage is physical removal of all odors rather
than masking them.
1.2. Ozonation - WATER
Ozonation is a chemical water treatment technique based on the infusion of ozone into water.
Ozone is a gas composed of three oxygen atoms (O3), which is one of the most powerful
oxidants. Ozonation is a type of advanced oxidation process, involving the production of very
reactive oxygen species able to attack a wide range of organic compounds and all
microorganisms. The treatment of water with ozone has a wide range of applications,
because:
- Rapidly reacts with bacteria, viruses and protozoa over a wide pH range
- Stronger germicidal properties than chlorination
- No chemicals are added to water
- Also efficient for organics degradation and inorganics removal
- Removes colour, taste and odour
1.3. Ionization
Ionizer uses an electrostatic charge to remove airborne pollutants, allergens, and other
unwanted particles from the atmosphere in your home. It releases negatively charged ions
into the air, which attract positively charged ions, such as dust and allergens, and then bind
together with them.
Because the ions have bonded together, this makes the troublesome particles much heavier
than they were before. As a result, these over-weighted particles are no longer light enough
to stay airborne and drop to the ground. Once they have landed on the floor, they are much
less likely to be inhaled and can be easily vacuumed up.
1.4 Aromatherapy
Diffusers are a great way to get your home smelling absolutely lovely, with the added benefit
of promoting quality air to help you breathe easy on those dry days. That's because diffusers
release beneficial essential oils into the air. Essential oils are believed to have antiviral,
antifungal, and antioxidant properties. They are released into the air through a diffuser as
aromatherapy and can help people relax and feel less stressed and anxious and may aid in
strengthening the immune system. By distributing these essential oils into the air, diffusers
can even help alleviate sinus and allergy symptoms.
The essential oils which may be used in this device must be water-soluble . Avoid using high
concentrations of essential oils, only a few drops of water-soluble oils, hydroalcoholic odours
or water-soluble perfumes. After pouring the fragrance, gently stir and activate the humidifier.
1.5 Ultrasonic Humidification
Humidifiers are used to increase moisture in the air. They're useful for helping you breathe
better, relieving dry skin, and ameliorating cold symptoms by reducing dryness and irritation
of the nose and throat. Humidifiers release humid air into your home, which may also help kill
AIO - Instruction of use, Version 2, Date: 16.06.2020 4/16
the flu virus. As an added benefit, humidifiers can even help lessen snoring because the
moisture they provide keeps the throat from drying out.
An ultrasonic humidifier is one that uses high-frequency sound vibrations to produce an extra
fine water mist that is then expelled to add moisture to the room. The ultrasonic generally has
no filter factored into its design. That does save operation costs.
2. Packing List
3. Technical Parameters
AIO - Instruction of use, Version 2, Date: 16.06.2020 5/16
The package includes
Name
Pieces
Device
1
Cable with power supply
1
Silicone Hose
1
Air bubble stone
2
Aluminium box
1
Instruction of use
1
General Specification
Model No.
CM1-AIO
Input
12V 30W
Ozone Output
1000 mg/h
Working Time (ozone)
5 min - 2h
Dimensions
15cm x 36cm x 15cm
Weight
3,5 kg
AC Adapter
12V 60W
4. Installation & Settings
4.1 Device Installation
Check pictures below and see how to connect all accessories and prepare a device to work.
4.2 How to set a device?
Plug the cable into the socket. The device will start working.
AIO - Instruction of use, Version 2, Date: 16.06.2020 6/16
1. Water tank (fill with water + essential oil)
5. Control buttons
2. Tank lid
6. Time selector knob
3. Aroma/Humidifier outlet
7. Ozone outlet / Silicone hose connection
4. Ion outlet
8. Power cord connection (AC adapter)
1. Activating of selected modes:
-Ionization: Button for activating the negative ion generation mode
(ION ON / OFF)
-Aromatherapy / Humidifier: Button for activation aromatherapy mode
(AROMA ON / OFF)
-Ozonation: Button for activation ozone mode
(OZONE ON / OFF)
AIO - Instruction of use, Version 2, Date: 16.06.2020 7/16
NOTE:
If you want to activate Aromatherapy, add few drops of essential oil to the water
.
- Ask distributor what essential oils you can use with a device. Some essential
substances can cause corrosion of the system.
- Do not exceed the amount of essences recommended by the manufacturer, as
the ultrasonic function may not be performed properly.
- Keep the device away from electrical devices. Remember that aromatherapy produces
water fog. Place the device at least 2 meters from the other objects which are not
waterproof.
Remember:
Fill the water tank at the top of the device before start. Turning on
Aromatherapy without water in the tank is prohibited.
The warranty does not cover repair of defects resulting from improper use of the device.
NOTE:
Ozonation and Aromatherapy modes are mutually exclusive - switching on one
turns off the other.
2. Ozonation mode - time settings:
- Single mode: short press of the button
In “Single mode” you can set the time of ozonation from 5 min to 2 hours.
3. Ozonation time controller:
- The settings are divided into 8 steps:
5min - 10min - 15min - 30min - 45min - 1h - 1,5h - 2h
4. Color signaling modes (LEDs above the buttons):
- Ionization mode: Green - active
- Ozonation mode: Red - active
- Aromatherapy mode: Green - active
4.3 Control buttons
4.3.1 DESCRIPTION OF CONTROL ELEMENTS
A. Time selector knob (rotary switch)
B. Negative Ion generator button
C. Ozone generator button
D. Aromatherapy button
4.3.2 DESCRIPTION OF FUNCTIONS
1. Standard Ionization
User can enable or disable the negative ion generator by pressing the ION button (B). Single
press enables the ion generator, second press disables it. When the generator is working
there is a green LED above the button.
AIO - Instruction of use, Version 2, Date: 16.06.2020 8/16
NOTE:
The ionization system makes a better cleaning of the air, since all the air that
passes through the device will be treated directly, but you have to take into account:
- Ionization, produces a small carbon, the result of the destruction of particles that are
electrified by high frequency, so clean the area of entry and exit of air.
- Do not place the device near areas that could be highly flammable, since thousands of
small micro sparks are produced inside the machine.
2. Standard aromatherapy
User can enable or disable the aromatherapy / vaporizer by pressing the Aromatherapy
button (D). Single press enables the aromatherapy module, second press disables it. When
the aromatherapy is working there is a green LED above the button.
3. Ozonation
Ozone generator has 4 working modes, enabled by buttons.
The time selector knob (A) has 8 positions which can be selected by turning the knob.
Selected position is indicated by a little mark on the knob itself.
Available time settings are: 5 minutes, 10 minutes, 15 minutes, 30 minutes, 1 hour, 1,5 hour,
2 hours and constant.
4.3.3 HOW TO SET A TIME OF OZONATION?
For a fast intense cleaning we need to generate 1 ppm of ozone so we will make the
following calculation:
(M3 of our room) x 0.321= Min. working time
Example:
For a 30 m2 room with a height of 2.5 meters would be:
(30 x 2,5) x 0,321= 24,0 min. - so we will program the machine to maximum 30 minutes.
For an intensive deep cleaning we need to generate at least 5 ppm of ozone so we will
make the following calculation:
(M3 of our room) x 1,605 = Min. Working time
AIO - Instruction of use, Version 2, Date: 16.06.2020 9/16
- Do not stick the air inlet or outlet to the wall and avoid obstructing them.
NOTE:
Follow the instructions for starting and using essential oils described in section 4.2
NOTE:
Ozone in high concentrations may be harmful, although it is not considered a
carcinogen or highly dangerous element, if it can be irritating to the respiratory tract with
misuse.
For this reason, follow the recommended instructions carefully:
- SEE instructions in section 7
- The night mode will be used for intense cleaning of those rooms, halls or instances,
without the presence of people or animals.
- Once the configured program has been completed, you will have to wait minimum 30
minutes to be able to access the worked area normally.
- You should not program the continuous mode if you cannot supervise the device.
- If you program continuous mode and you sense ozone outside the room where the
device is operating, ventilate the room and turn off the device.
Example:
For a 30 m2 room with a height of 2.5 meters would be:
(30 x 2,5) x 1,605= 120,3 min. so we will program the device to 2 hours.
a) Single ozonation of air / water / item
By quickly pressing the Ozone button (C) user enables the single ozonation mode. Generator
is working for the selected time and then switches off.
Mode can be used for air, water or item ozonation.
When the generator is working there is a RED led above the button, when it is in standby
(selected time has passed) RED led is off, GREEN led is on.
ITEM OZONATION
Put the items in the aluminium box. You can ozone scissors, combs, masks or other small
items. Then connect one side of silicone hose to the device (see Device Installation 4.1 ) and
place the other side of the hose into aluminium box. See below how the hose should be
inserted.
AIO - Instruction of use, Version 2, Date: 16.06.2020 10/16
NOTE:
this rule is not exact, as it will depend on the temperature, air pressure, room
layout, air flow zones, additional air conditioning systems, etc.
NOTE:
See some of the recommended applications in Section 8.
- When using the water ozone function, connect the hose to the air bubble stone.
- Put a silicone hose with an air bubble stone into the water container and then activate the
"ozone" function on the device.
- Silicone is resistant to the destructive effects of the sun, ozone and gases in the
atmosphere. If you lose your hose or want to buy a new one, remember to choose a 100%
silicone hose without plastic.
NOTE:
Electrical items like phone or smartwatch etc. should not be ozonatated because
ozone may affect their condition. The manufacturer is not responsible for items and
equipment that have been ozonized despite the recommendations in the instructions.
Inhaltsverzeichnis
