Aiphone RY-IP44 Betriebsanleitung

RY-IP44

Programming Manual

For use with the IPW-1A

1218

Input/Output Network Adaptor

This manual is for programming the RY-IP44 with the IPW-1A only. Refer to the IPW-1A

Installation and Operation Manuals for complete installation/programming information.

For instructions featuring the RY-IP44 with the IX2 Series, visit www.aiphone.com/IX2-RYIP44

For instructions featuring the RY-IP44 with the IS IP Series, visit www.aiphone.com/ISIP-RYIP44

ATTENTION:

• RY-IP44

• Programming Manual

• 6 Screw Terminal Blocks

• MAC Address Label

Overview / Description

2 | RY-IP44 Programming Manual

Package Contents

The RY-IP44 is a Barix Barionet 50 with proprietary rmware installed for the device to function with the Aiphone

IPW-1A system.

The 4 relay outputs can be programmed to trigger for door release, while calling, while communicating, or while calling

and communicating.

The RY-IP44 is not a PoE device and requires a dedicated 9-30V DC power supply. Use the Aiphone PS-1208UL

power supply (sold separately).

• General understanding of IPW-1A programming

• 9-30V DC power supply (sold separately)

• Unique IP address for each adaptor

Installation Requirements

Conguring the RY-IP44 (assigning IP address and system use)

Relay status and control.

Click on each LED to verify

relay function.

Digital input status

Conguration button

The RY-IP44 has a default IP address of 192.168.1.45. Open a web browser and point the address bar to 192.168.1.45

for access to the adaptor. The rst screen to appear will be the Device Status screen.

Click the CONFIGURATION button to open the Device Conguration screen. This is where a unique IP Address,

Netmask, and Gateway can be assigned to the adaptor. Consult with your IT department for these settings.

Settings not utilized for Aiphone

functionality. Do not adjust.

SECURITY: For creating a password for

access to the web browser interface.

AIPHONE: Select the Aiphone system

type the relay is to be used with.

Enter new IP Address if default is not

to be used.

The Aiphone system type that the adaptor is being integrated with will need to be selected. Click the AIPHONE tab. Use

the drop down by System Type to select the IPW-1A system. Enter a UDP Protocol Port number or leave at 0 to use the

default (1724). When done, click OK. Click Reboot on the next screen to restart the adaptor.

System Type: Select IPW-1A

UDP Protocol Port: Enter “0” if default port

(1724) is to be used. Port 1724 is the default port

on the IPW-1A stations for UDP messaging.

The RY-IP44 has 4 relays that can be programmed to trigger while calling, while in communication, or while calling and

communicating with a specic door station. The relays can also be programmed for door release.

Relay Action options:

• Door Release - Normally-Open

• Door Release - Normally-Closed

• Active while Calling from source

• Active while in Communication with source

• Active during Calling and Communication

• A

ctive While Any Station Calling

*Relay will trigger when the PC master station pushes the door release button.

}

Relay will trigger when the associated door station calls or communicates.

}

Relay triggers when any station calls. No assignment required.

}

IN0 IN1 NO C NC

* When using the RY-IP44 for door release, the relay on the IPW-1A must be set to door release and the relay

must be jumpered to the sensor input as shown below.

Relay Output Programming

Application Setup button

From the Device Conguration screen, click APPLICATION SETUP.

Conguring the RY-IP44 (continued)

4 | RY-IP44 Programming Manual

Enter the Station ID for the IPW-1A to be associated with each relay on the RY-IP44. Select the relay condition from the

Relay Action drop down menu. When done, click on Apply Settings. Click Reboot on the next screen to restart the

adaptor with the applied settings.

RY-IP44 Wiring

Aiphone Corporation

www.aiphone.com

[email protected]

800-692-0200

RY-IP44 Dimensions

4-1/8”

3-5/16”

Mounting:

The RY-IP44 adaptor mounts to an Aiphone

W-DIN11 mounting rail (sold separately).

Depth:

1-1/4”

Door release: External signaling:

Power:

Use a 9-30V DC (300mA @ 12VDC)

power supply to power the RY-IP44

adaptor.

Use the Aiphone

PS-1208UL power supply (sold

separately).

Door

Strike Bell

= Power Transformer (use proper power for the strike, mag lock, or external signaling device being used).

PS-1208UL

{

Relay 1

Relay 2

Relay 3

Relay 4

{

Relay 1

Relay 2

Relay 3

Relay 4

{

Power

Relay contact rating: 30V DC, 0.5A.

FCC WARNING:

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference that may cause undesired operation.

• For proper regulatory compliance, the drain wire should be disconnected at the power supply end of the cable.

• Changes or modications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

Relay Output Programming (continued)

Andere Handbücher für RY-IP44

Inhaltsverzeichnis

Andere Aiphone Adapter Handbücher

Aiphone

Aiphone IPW-1A Bedienungsanleitung

Aiphone

Aiphone IX SERIES Betriebsanleitung

Aiphone

Aiphone JKW-IP Bedienungsanleitung

Aiphone

Aiphone DS-B Bedienungsanleitung

Aiphone

Aiphone RY-IP44 Betriebsanleitung

Aiphone

Aiphone PS-18C Bedienungsanleitung

Aiphone

Aiphone BGR-10A Bedienungsanleitung

Aiphone

Aiphone JBW-BA Bedienungsanleitung

Aiphone

Aiphone JKW-IP Bedienungsanleitung

Aiphone

Aiphone MFW-P3 Bedienungsanleitung

Aiphone

Aiphone JKW-BA Bedienungsanleitung

Aiphone

Aiphone RY-IP44 Betriebsanleitung

Aiphone

Aiphone BA-1 Bedienungsanleitung

Aiphone

Aiphone BG-10C Bedienungsanleitung

Aiphone

Aiphone IX SERIES Handbuch

Aiphone

Aiphone JKW-IP Konfigurationshandbuch

Aiphone

Aiphone IX SERIES Handbuch

Aiphone

Aiphone GTW-LC Bedienungsanleitung

Aiphone

Aiphone IS-IPRY8 Betriebsanleitung

Aiphone

Aiphone BG-10C Bedienungsanleitung

Aiphone

Aiphone JBW-BA Bedienungsanleitung

Aiphone

Aiphone AX SERIES Bedienungsanleitung

Aiphone

Aiphone JKW-IP Bedienungsanleitung

Aiphone

Aiphone IPW-1A Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung