Airflow Breeze 3.1 Bedienungsanleitung
Contact: Air Flow Technology, Inc. 1427 W. 86th St. Suite 328, Indianapolis, IN 46260
Note:
• Turn the function switch to “OFF” position
• Prior to setting the function (Heat or Cool) remove the unit from the
vent opening.
• Allow a few minutes for the unit to automatically adjust to room
temperature
Setting AirFlow Breeze for “HEAT”
• Turn the “SET POINT” switch all the way to the left so the arrow
points to the end of the blue section of the dial.
• Turn “FUNCTION SWITCH” to the “HEAT” position
• The fans will begin to run
• Depress the “FAN SPEED” button to choose desired speed.
• Slowly turn the “SET POINT” switch to the right until the fans stop
running. The AirFlow Breeze is now set for the heat function.
• Place the AirFlow Breeze into the vent opening.
• Relax and enjoy the comfort of your room.
Setting AirFlow Breeze for “COOL”
• Turn the “SET POINT” switch all the way to the right so the arrow
points to the end of the red section of the dial.
• Turn “FUNCTION SWITCH” to the “COOL” position
• The fans will begin to run
• Depress the “FAN SPEED” button to choose desired speed.
• Slowly turn the “SET POINT” switch to the left until the fans stop
running. The AirFlow Breeze is now set for the cool function.
• Place the AirFlow Breeze into the vent opening.
• Relax and enjoy the comfort of your room.
AirFlowBreeze is covered under U.S. Patent No. 5,632,677 and additional Patents Pending.
AirFlow Breeze
Series 3.1
Rev. B
Contact: Air Flow Technology, Inc. 1427 W. 86th St. Suite 328, Indianapolis, IN 46260
AirFlow Breeze User Guide:
Congratulations on the purchase of your AirFlow
Breeze. This innovative product from AirFlow
Technology will gently deliver
warm or cool air just where you
need it.
The patented design simply
slides into the existing
vent opening, boosting air flow
and improving comfort in any
room in your home.
Simple to install and operate,
the AirFlow Breeze is a safe and
energy efficient way to improve the air flow from your
existing central heating/cooling system
GETTING STARTED:
The AirFlow Breeze will improve the air flow in any
room in your home that is connected to your central
heating/cooling system. Locate the vent that is
delivering air to the room. Remove the existing vent.
Your new AirFlow Breeze will slide into this opening
AFTER you have selected the desired settings.
The AirFlow Breeze must be adjusted at normal room
temperature using the instructions which follow prior to
placing the AirFlow Breeze in the vent opening.Be
sure the AirFlow Breeze is not blocked by furniture.
AirFlowBreeze is covered under U.S. Patent No. 5,632,677 and additional Patents Pending.
Note: When adjustments are made, always return to the
“OFF” position prior to selecting the next setting.
Setting the desired fan speed
• Turn “FUNCTION SWITCH” to the OFF position.
• Plug the power supply into a nearby wall outlet and
the other end into the power input slot located at the
top of the control panel.
• Turn the “FUNCTION SWITCH” to the “FAN”
position. The fans will begin running.
• The “FAN SPEED” button moderates the amount of
air flow.
• Depress the “FAN SPEED” button to choose desired
speed. There are three speeds (slow, medium, fast)
from which to choose. As you depress the button,
the fan will cycle through each speed.
• It is recommended to initially set the fan speed on
high. To change the fan speed at any time after
initial setting, simply depress the "FAN SPEED"
button.
ONE YEAR LIMITED WARRANTY
Subject to the following limitations Air Flow Technology (manufacturer) warrants that
the AirFlow Breeze will for one (1) year from date of original retail purchase, but not
exceeding two (2) years from date of manufacture, remain free from appearance of
defects in workmanship or materials.
This warranty is subject to the following limitations: (1) manufacturer’s liability is
limited to the replacement or repair of the unit, as decided by the manufacturer; (2) a
defective unit must be returned, prepaid with proof of purchase; (3) This warranty
does not apply to defects resulting from the alteration, abuse, accidental damage,
unauthorized repair or misuse of the unit.
This warranty is given in lieu of all other warranties, guarantees and conditions on
manufacturer’s part and the manufacturer shall have no tortuous or other liability in
respect to this AirFlow Breeze.
By purchasing this product, the consumer agrees that, to the maximum extent
permitted by law, Air Flow Technology, Inc., is not responsible for direct, special,
incidental, or consequential damages resulting from any breach of warranty or
condition, or the consumer's use or misuse of the product, or under any other legal
theory.
Air Flow Technology, Inc. reserves the right to change product specifications without
notice.
Inhaltsverzeichnis
Andere Airflow Lüfter Handbücher
Airflow
Airflow WHV-8 Bedienungsanleitung
Airflow
Airflow QT 120B Bedienungsanleitung
Airflow
Airflow Uno hab Bedienungsanleitung
Airflow
Airflow Aura Smart Bedienungsanleitung
Airflow
Airflow QuietAir QT 120T Bedienungsanleitung
Airflow
Airflow Duplexvent MULTI-N Bedienungsanleitung
Airflow
Airflow QT 150T Bedienungsanleitung
Airflow
Airflow QT 100T Bedienungsanleitung
Airflow
Airflow Duplexvent Flexi-V DV500 Service-Handbuch
Airflow
Airflow 7106A Bedienungsanleitung
Airflow
Airflow 7006A Bedienungsanleitung
Airflow
Airflow LA HABRA Bedienungsanleitung
Airflow
Airflow iCON 30 Installationsanleitung
Airflow
Airflow ICONsmart 15 Bedienungsanleitung
Airflow
Airflow 72687117 Installationsanleitung
Airflow
Airflow Duplexvent DV65 Entro-V Bedienungsanleitung
Airflow
Airflow QT 100B Handbuch
Airflow
Airflow QT 150VS Bedienungsanleitung
Airflow
Airflow Susurro 400 Bedienungsanleitung
Airflow
Airflow AVENTA TURBO Handbuch
