AirLive MD-3025-IVS Bedienungsanleitung

MD-3025-IVS

e-Fence Guide

Version 1.0

MD-3025-IVS e-Fence Setup Guide

MD-3025-IVS

e-Fence Guide

1. Overview

The MD-3025-IVS has built-in video analytic function for e-Fence detection. It is a

standalone function built into the camera’s firmware without the need for external software

or device. The e-Fence function can be used to detect any objects when it crosses border

of detection areas. This guide will focus on using MD-3025-IVS’s “e-Fence”function to do

intruder detection in places like museum, residential area, warehouse, military structure, or

jail.

The e-Fence works by defining 1~4 zones on the video image. When a person or object

crosses the border or moves in/out the zone, the camera will detect the object immediately.

The important factors for successful e-Fence installations are:

Choose the appropriate installation location and avoid any shadow get into or pass

through the detecting area.

Choose the appropriate camera height (distance).

We will guide you through the procedure in the following articles.

2. Hardware Installation Guidelines

The followings are basic installation guidelines for best e-Fence results. However, the

e-Fence function can still work in less than ideal conditions.

MD-3025-IVS e-Fence Setup Guide

1. Prevent from any shadow comes into the detection area.

2. Make sure there is enough illumination.

(Noise will cause the false alarm.)

MD-3025-IVS e-Fence Setup Guide

3. Make sure the appropriate camera distance.

1080P

720P

Viewing Angle

Distance (Max.)

Viewing Angle

Distance (Max.)

Horizontal

15M

Horizontal

14M

※Note: The maximum distance is for reference only.

3. Camera Configuration

3.1 Finding camera using AirLive IP Wizard

The IPCAM’s default IP address is 192.168.1.100，but this address can change when there

is DHCP server(router) in your network. Therefore, please install AirLive IP wizard to find

your camera.

1. Install the “AirLive IP Wizard”from the installation CD or download it from this link.

2. Run the “setup.exe”and open the AirLive IP Wizard.

3. The IP Wizard will auto search and list out the camera found. Double click on the camera

that you want to configure.

4. The IPCAM’s web configuration will open automatically after double click. Please enter

the “admin”for username and “airlive”for password.

5. After entering the correct username and password. You will enter the camera’s web

configuration page. When prompted to install “Media Control”from “OvisLink Corp”,

please select “Yes”to install.

MD-3025-IVS e-Fence Setup Guide

3.2 Enable Camera’s Video Analytic function

Please use Internet Explorer as the default browser. If you are using IE 11, please go to

“Setup->Compatibility View Settings”and add the camera’s IP address to the list.

Please follow the steps below to enable camera’s video analytics function.

1. Click on “Configurations”on left menu bar

2. Click on “Video”on the left menu bar and select “enable”Intelligent Video Analytics.

3.3 Setting Resolution and Frame Rate

On the video page, it is important to set the appropriate resolution and frame rate.

Please remember to click on “Apply”button after finish settings.

MD-3025-IVS e-Fence Setup Guide

Main Stream Resolution

Main Stream Frame Rate

Second Stream Frame Rate

1080P

25FPS

15FPS

720P

25FPS

15FPS

3.4 Configure e-Fence Function

Please go to “Video Analytics”menu and select “e-Fence”

Below is the main page of e-Fence.

MD-3025-IVS e-Fence Setup Guide

The first step is to set the zones according to your environment. The controls are separated

in Zone Area and Zone Settings as indicated above.

Zone Settings

This is the default zone setting. When you click inside the “Zone Area”, you can move

and resize the zone by holding the “inside zone”and the “change points”.

Zone Area

Zone Settings

Click and hold inside

the zone to move the

block

Click and hold the

change points to resize

the zones.

Click inside the zones to

activate edit mode

Please remember to press “Apply”

after change settings, otherwise the

settings won’t take effect.

MD-3025-IVS e-Fence Setup Guide

Create another zone: When you press “Add Zone”button, you can create up to 4

zones to fit your need.

After you set the zone area correctly, the next step is to calibrate the object size according

to your installation.

Calibration

“Anything”is our recommendation and you don’t need to do the calibration. However, you

could also choose “People”or “Vehicles”to set “Calibration”when the camera cannot

detect objects accurately.

You can perform calibration by checking the “people”in the calibration field.

On the Zone Area, a window label “Min Size”will appear.

Click inside the small

box to change the size

Minimum Object Size

Click left mouse button

to set each position

Click right mouse

button to complete a

zone when you finish a

last position setting.

MD-3025-IVS e-Fence Setup Guide

Click on “Min. Size”window to change the size of the minimum object.

Min Size: Object smaller than this size will not be detected.

Other Important Settings

Detect: Please keep on “Anything”for an accurate detection.

Sensitivity: “Moderate to High”is the recommended settings

Statistic Chart Display: When enabled, it will show the result in a statistic graph. It is not

recommended to turn on this function as it might use a lot of CPU resource which can

influence the performance. If you use this function, please remember to turn it off after

finish using it.

Event Action

The camera’s e-Fence function can perform certain action when an event is met. For

example, it can be set if any object is moving into the detection areas, it will start to record a

video and send alarm email to user.

Example:

Setting if the object is moving into the detection areas between 7am to 9pm, the camera will

record an event video and send an email to user.

1. Go to the camera’s UI, select “Event->Media Format”, and choose recording period.

2. Check “Enable SMTP”, select SMTP or Gmail, and fill in all the relation data. (Please

press “Test SMTP”button to make sure your setting is correct or not.)

MD-3025-IVS e-Fence Setup Guide

3. Go to “Video Analytics”and “e-Fence”. You can change the “Interval”to have the time

interval between events.

4. Now, please click on “Set Event Action”. Click on “Add”. Then the following screen will

appear. Please enter the data as shown below. Please remember to click on “Save”

after finish settings.

Note: The Event Name does not allow spaces in between words. Please enter the

event name as one single word.

Andere Handbücher für MD-3025-IVS

Inhaltsverzeichnis

Andere AirLive IP-Kamera Handbücher

AirLive

AirLive CW-720IR Bedienungsanleitung

AirLive

AirLive WL-2600CAM Bedienungsanleitung

AirLive

AirLive AirCam WN-150CAM Bedienungsanleitung

AirLive

AirLive WL-5460CAM Bedienungsanleitung

AirLive

AirLive OD-2025HD Bedienungsanleitung

AirLive

AirLive BU-3025 Bedienungsanleitung

AirLive

AirLive POE-100CAMV2 Bedienungsanleitung

AirLive

AirLive POE-200CAM Bedienungsanleitung

AirLive

AirLive SD-2020 Bedienungsanleitung

AirLive

AirLive POE-260 CAM Bedienungsanleitung

AirLive

AirLive OD-2025HD Bedienungsanleitung

AirLive

AirLive OD-300CAM Bedienungsanleitung

AirLive

AirLive OD-2025HD Bedienungsanleitung

AirLive

AirLive SmartCube 300W Bedienungsanleitung

AirLive

AirLive AirCam WN-200HD Bedienungsanleitung

AirLive

AirLive MD-3025 Bedienungsanleitung

AirLive

AirLive SD-3030 Bedienungsanleitung

AirLive

AirLive WN-200HD Bedienungsanleitung

AirLive

AirLive BU-3025 Bedienungsanleitung

AirLive

AirLive BC-5010 Bedienungsanleitung

AirLive

AirLive POE-200CAM V2 Bedienungsanleitung

AirLive

AirLive WL-2000CAM Bedienungsanleitung

AirLive

AirLive OD-2050HD Bedienungsanleitung

AirLive

AirLive OD-2060HD Bedienungsanleitung

Beliebte IP-Kamera Handbücher anderer Marken

FLIR

FLIR Exx series Bedienungsanleitung

Avigilon

Avigilon H4A-BO1-IR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWCA-C128-64 Bedienungsanleitung

ShareTech

ShareTech AV1 Bedienungsanleitung

Ezviz

Ezviz C6C Bedienungsanleitung

Melchioni

Melchioni UCAM 2015 Bedienungsanleitung

Geutebruck

Geutebruck G-Cam/ESD-4630 Bedienungsanleitung

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Bedienungsanleitung

Mitel

Mitel 6800i Series Service-Handbuch

Vitek

Vitek VTC-IR403-212NP Bedienungsanleitung

THOMSON

THOMSON DSC - 323W Bedienungsanleitung

AVer

AVer FB2027 Bedienungsanleitung

ENFORCER

ENFORCER EV-T5105-N2SQ Bedienungsanleitung

Wansview

Wansview NC543 Bedienungsanleitung

Eneo

Eneo MCB-64A0003M0A Bedienungsanleitung

deView electronics

deView electronics CBDNI36F Bedienungsanleitung

Swann

Swann SwannEye Bedienungsanleitung

LevelOne

LevelOne IP CamSecure Bedienungsanleitung