AirLive WL-1200CAM Bedienungsanleitung
Wireless-G Dual Stre
WL-1200CAM
am IP Camera
Table of Contents
List of Lan
g
ua
g
es
WL-1200CAM
Polski
Magyar
En
g
lish
Español
Deutsch
Português
日本語
Slovensky
................
..............
..............
...........
................
...........
................
Česky
...............
..................
1
11
20
55
64
73
29
38
46
Declaration of Conformity
We, Manufacturer/Importer
OvisLink Corp.
5F., NO.6, Lane 130, Min-Chuan Rd., Hsin-Tien City, Taipei County, Taiwan
1
WL-1200CAM English
Declare that the products
Wireless-G Dual Stream IP Camera
AirLive WL-1200CAM
are in conformity with
In accordance with 89/336 EEC-EMC Directive and 1999/5 EC-R & TTE Directive
Clause Description
■ EN 300 328 V1.7.1(2006-05) Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission equipment operating in the
2.4GHz ISM band. And using spread spectrum modulation techniques; Part 1：technical Characteristics and test
conditions Part2：Harmonized EN covering. Essential requirements under article 3.2 of the R&TTE Directive
■EN 301 489-1 V1.5.1(2004-11) Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic compatibility(EMC) standard for
radio
■ EN 301 489-17 V1.2.1(2002-08) equipment and Services; Part 17：Specific conditions for wideband data and HIPERLAN equipment
■ EN 50371 :2002 Generic standard to demonstrate the compliance of low power Electronic and electrical apparatus with the basic
restrictions related to human exposure to electromagnetic field (10MHz – 300GHz) -General public
■EN 60950-1:2001 Safety for information technology equipment including electrical business equipment.
■CE marking
Manufacturer/Importer
Signature： ______________
Name ： Albert Yeh
Position/ Title : Vice President
Date： 2008/2/13
English
2
WL-1200CAM
Note on the FCC standard
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferences
when the equipment is operating in a commercial area. This equipment generates, uses and may radiate radio
frequency energy, and if not installed in accordance with the user guide, may cause interference in the
transmission of radio communications. If operating in a residential area, it is probable this equipment will cause
harmful interference, in which case the user will be required to try to correct this interference using his own
means.
Note on CE Marking
This is a Class B product. In a residential area this product may cause radio interference, in which case the user
can be required to take the appropriate measures. OvisLink Corp. hereby declares that AirLive WL-1200CAM
meets the basic requisites of directive 99/05/CE, and is therefore liable for the accuracy of these data:
OvisLink Corp.
5F, No.6 Lane 130,
Min-Chuan Rd, Hsin-Tien City,
Taipei, Taiwan
TEL: +886-2-2218-6888
Warranties
This product has undergone various quality controls to ensure proper operation.
This product is covered by a two-year warranty for countries inside European Union. For other countries, the
warranty period is one year only. In the event of any manufacturing fault or breakdown, it will be repaired by
OvisLink Corp. Please contact your supplier for details on the procedure to follow. This warranty shall not be
applicable in the event of damage caused by improper use of the product, accidents, faulty handling or
manipulation nor any future incompatibility with third party products.
English
English
3
WL-1200CAM English
Important Information
The default IP address is 192.168.2.3
The default login name is admin
The default password is airlive
Hardware Installation
1. Attaching the Camera Stand
The Wireless Internet Camera comes with a camera
stand, which has a swivel ball screw head that can be
attached to the camera’s screw hole on the
top/bottom panel. Attach the camera stand to the
camera and station it for your application.
2. Installing the Antenna
Fasten the antenna to the connector on the rear
panel of camera. (Please refer to the user manual
for Wireless installation)
System Requirements:
English
yCPU: Intel Pentium II 266MHz or above
yMemory: 32MB (64MB recommended)
yVGA resolution: 800x600 or above
4
WL-1200CAM English
English
3. Connecting the Ethernet Cable
Connect the Internet Camera to your network by
attaching the network cable from the switch/router to
the LAN port of the Internet Camera.
4. Connecting the Power Supply
Connect the power adapter to the Internet Camera
and plug the power adapter to the power outlet.
The LED will light up when the Internet Camera is
powered. (Warning:Use the power adapter
shipped with the camera. Incorrect power source
could cause hardware damage.)
Running the Software Installation
The Setup Wizard is the convenient windows software that will guide you through the installation of your
camera easily and quickly. After connecting the camera to your network, you can install the Setup
Wizard and complete the configuration now.
English
Please insert the driver CD that came with your device into
your CD-ROM drive. The driver CD will automatically start
and show the installation guide. If not, please double click
the CD-ROM device icon in "My computer", and execute
autorun.exe. The following screen will be displayed.
Please Click “Setup Wizard”.
The system will start the installation procedures. Click
“Next” to continue installation
5
WL-1200CAM English
English
Click “Finish” to complete the software installation.
Using the Setup Wizard
6
WL-1200CAM
After installation, the Setup Wizard launches
automatically. The main window will appear as shown,
and the connected camera will be displayed in the list.
1. Click the connected camera listed on the left of
the window.
2. Click the “Setting Wizard” bottom to change the
camera IP address.
English
7
WL-1200CAM
English
3. When the pop window shows up, enter the
default password “airlive” and click “OK”
4. Change the camera name and IP address so
they belong to the same network segment of
your local area network.
5. Click “Finish” to process.
English
English
6. A pop up window asks if you want to run the
“Camera Viewer”. Click “Yes” to proceed.
The “Camera Viewer” windows application runs and
shows the video automatically.
8
WL-1200CAM English
Inhaltsverzeichnis
Sprachen:
Andere AirLive Sicherheitskamera Handbücher
AirLive
AirLive AirCam OD-600HD Bedienungsanleitung
AirLive
AirLive MD-3025 Bedienungsanleitung
AirLive
AirLive OD-300CAM Bedienungsanleitung
AirLive
AirLive FE-501OD Bedienungsanleitung
AirLive
AirLive FE-200VD Bedienungsanleitung
AirLive
AirLive SmartCube 300W Bedienungsanleitung
AirLive
AirLive AIRCAM OD-600HD Bedienungsanleitung
AirLive
AirLive CU-720IR Bedienungsanleitung
AirLive
AirLive AIRCAM POE-250HD Bedienungsanleitung
AirLive
AirLive SmartCube 300W Einrichtungshandbuch
AirLive
AirLive POE-280HD Bedienungsanleitung
AirLive
AirLive FE-201DM Bedienungsanleitung
AirLive
AirLive POE-200HD Bedienungsanleitung
AirLive
AirLive SmartCube 300W Installations- und Benutzerhandbuch
AirLive
AirLive MD-3025 Bedienungsanleitung
AirLive
AirLive BC-5010 Bedienungsanleitung
AirLive
AirLive MD-3025 Bedienungsanleitung
AirLive
AirLive FE-501OD Bedienungsanleitung
AirLive
AirLive AIRCAM POE-200HD Bedienungsanleitung
AirLive
AirLive FE-201DM Bedienungsanleitung
