Airwell HAD series Bedienungsanleitung

CONTENT

FEATURESAND FUNCTIONS .........1

PRECAUTIONS................................2

NAME OF EACH PART....................3-4

OPERATION.....................................5

PROTECTION MODES....................6

CARE AND MAINTENANCE............7-8

TROUBLESHOOTING .....................9

EXCEPTION FOR MULTI

SPLITTYPE ......................................10

OPERATING MANUAL

HAD/JAD/DHA Wall Mounted Range

Before using your air-conditioner,please

read this operating instruction carefully and

keep it for future reference. Part No. 468100332/01

OM HAD/JAD/DHA 1-N.1 GB

ENGLISH

DC INVERTER

R410A

Thank you for

purchasing our

Room Air Conditioner.

VERTICAL AIR SWING

Automatic swing of supply air in vertical

direction. The flap moves automatically in

upward and downward direction to spread

the conditioned air evenly throughout the

room.

WIRELESS REMOTE CONTROL UNIT

The Wireless Remote Control Unit allows

convenient control of air conditioner

operation.

OPERATING TEMPERATURE RANGE

Indoor Outdoor

AUTO CHANGE OVER

The operation mode (cooling, dry, heating)

is switched automatically to maintain the

set temperature, and the set temperature is

kept constant at all times.

SLEEP TIME

Designed to create comfortable sleeping

conditions. When in COOLING mode, the

temperature rises one degree centigrade

after each consecutive hour, up to three

hours, from the start of the mode. The

temperature rise prevents the feeling of

over-cooling while sleeping (when your

body is at rest). In HEATING mode the

reverse occurs; the air conditioner lowers

its temperature one degree every hour.

When in SLEEP mode, the air conditioner

will be automatically turned off after seven

hours.The result is a more comfortable and

invigorating sleep, which leaves you feeling

fresh and energetic in the morning.

DB[°C] WB[°C] DB[°C] WB[°C]

Cooling Upper limit 32 23 46 NA

Lower limit 21 15 10 NA

Heating Upper limit 27 NA 24 18

Lower limit 10 NA -15 -16

ENERGIZED AIR

The Bipolar Sterionizer makes you feel more

energized.Simply activate the Sterionizer

of your unit and enjoy well conditioned

aircombined with ionized air, which will make

youfeel like you were in a forest or breathing

the air just after a storm.

FEATURES AND FUNCTIONS

PRECAUTIONS

g Danger

This sign warns of death or serious injury.

Do not attempt to install this air●

conditioner by yourself.

This unit contains no user-serviceable●

parts. Always consult authorized service

personnel for installation and repairs.

When moving, consult authorized●

service personnel for disconnection and

installation of the unit.

Do not become excessively chilled by●

staying for lengthy periods in the direct

cooling airflow.

Do not insert fingers or objects into the●

outlet port or intake grilles.

Do not start and stop air conditioner●

operation by disconnecting the power

supply cord and so on.

Take care not to damage the power●

supply cord.

In the event of a malfunction (burning●

smell, etc.), immediately stop operation,

disconnect the power supply plug, and

consult authorized service personnel.

If the power supply cord of this appliance●

is damaged, it should only be replaced

by the authorized service personnel,

since special purpose tools and specified

cord are required.

The appliance is not intended for use by●

young children of infirm persons without

supervision.

Please pre-heat the air conditioner for at●

least 12 hours before operation. If use it

for a long time, please keep the power

on.

g Danger

This sign warns of damage to property.

Provide occasional ventilation during use.●

Do not direct air flow at fireplaces or●

heating apparatus.

Do not climb on, or place objects on the●

air conditioner.

Do not hang objects from the indoor unit.●

Do not set flower vases or water●

containers on top of air conditioner.

Do not expose the air conditioner directly●

to water.

Do not operate the air conditioner with●

wet hands.

Do not pull power supply cord.●

Turn off power source when not using●

the unit for extended periods.

Check the condition of the●

installationabout damages.

Do not place animals or plants in the●

direct path of the air flow.

Do not drink the water drained from the●

air conditioner.

Do not use in applications involving●

the storage of foods, plants or animals,

precision equipment, or art works.

Connection valves become hot during●

heating; handle with care.

Do not apply any heavy pressure to heat●

exchanges fins.

Operate only with air filters installed.●

Do not block or cover the intake grille●

and outlet port.

Ensure that any electronic equipment is●

at least one metre away from either the

indoor or outdoor units.

Avoid installing the air conditioner near a●

fireplace or other heating apparatus.

When installing the indoor and outdoor●

units, take precautions to prevent access

to infants.

Do not use inflammable gases near the●

air conditioner.

INDOOR UNIT

Air intake grill1

Air lter2

Supply air ap (louver)3

Horizontal air flow deflecting4

louvers

Air outlet5

Unit’s indicatiors and on unit6

control

Ionizer (optional)7

Power cord (optional)8

Part names and function

AIonizer

The icon will light up when Bi-Polar ionizer

is activated via remote control. It will light up

for about 15 seconds before goes off. (only

applicable to units fitted with Bi-Polar Ionizer)

BTimer

The icon will light up when Timer or Sleep

operation is activated. During this mode,

upon receiving any signal from Remote

Control (RC), the light will come up strong

and deemed after about 15 seconds.

CFilter

If the icon light up (for about 30 seconds

after display is going off), it means that

filter should be cleaned. The icon will light

up again every time a signal is received

from RC, until it is reset. To reset the filter

icon, press the reset button (J) and release

quickly. The icon will light up for about 2

seconds and off, indicating the filter icon

had been reset.

DTemperature Icon

This icon indicate the set point temperature

(SPT). During operation mode, upon

receiving any signal from Remote Control

(RC), the SPT will be displayed for 15

seconds before it goes off.

ECOOL Icon

The icon will light up if the operation mode

is set to "COOL", "DRY" or "AUTO".

After around 15 seconds, the icon will be

deemed. Upon receiving any signal from

Remote Controller (RC), the light will come up

strong and deemed after about 15 seconds.

FHEAT icon

The icon will light up if the operation mode

is set to "HEAT". After around 15 seconds,

the icon will be deemed. Upon receiving

any signal from Remote Controller (RC), the

light will come up strong and deemed after

about 15 seconds.

GFan Speed

The indoor fan speed set by user will be

indicated as below:

a) Low

b) Medium

c) High

d) Strong

e) Auto

HInfra-Red (IR) receiver

Receive signal from the Remote Controller (RC)

IStandby LED

NAME OF EACH PART

This LED will light up when the unit is

on Standby. It will turn off when unit is in

operation.

JMODE/RESET Button

This is a multi-function button. It is a MODE

button before the Filter Icon has lighted up.

During the Filter Icon lights up, it will become

a RESET button. Once the filter is RESET, it

will become a MODE button again.

Mode Function:

Every short pressing , the next operation

mode is selected, in this order: SB → Cool

Mode → Heat Mode → SB → …

If buttom is pressed long,the system enters

diagnostic mode.

Reset Function:

Short pressing reset the lter counter.

NAME OF EACH PART

q Out door unite air intake

wPower cable

e Control Wire (optional)

rDarin hose

tLiquid line

ySuction line

uOut door unite air outlet

Note: These instructions also apply if the products differ externally to those appearing in

the manual

OUTDOOR UNIT

OPERATION TIPS

Set a suitable room temperature; excessively low room temperature is not good●

for your health and wastes electricity. Avoid frequent setting of the temperature.

During cooling, avoid direct sun. Keep curtains and blinds closed. Close doors and●

windows to keep the cool air in the room.

Avoid generating heat or using of heating appliances while the air conditioner in●

cooling mode.

Make sure that the air flap is positioned properly: horizontal flow in cooling and●

downward vertical flow for heating.

Keep the room temperature uniform by adjusting the left/right vertical air blades.●

Position the air flap and the left/right air blades in such a manner as to prevent●

your body from being exposed directly to air drafts.

During prolonged operation, ventilate the room occasionally by opening a window●

from time to time.

In a power failure, the microprocessor memory is retained.When restarted,●

operation will be resumed in the last mode of operation. After power failure, all pre-

set times are cleared. The system is forced to stand-by and TIMER LED blinks.

The blinking stops when any new message is accepted from RC.

After turning on, allow more than 3 minutes for cooling, heating or dry operation to●

start.

When DRY mode is used, make sure that the room temperature is between 20°C●

and 27°C. When used out of this range, the unit may protect itself and become

inoperative.

When COOL or DRY modes are used, make sure that the room’s relative humidity●

is below 78%. If the unit is used for a prolonged periods of time in high humidity,

moisture may form on the air outlet and drip down.

Remote control signals may not be received if the indoor unit controls cover is●

exposed to direct sunlight or strong light. In such a case, block the sunlight or dim

the lighting.

The remote control is operative in a range of 8 meters. If you are out of range, the●

remote control may have difficulties in transmitting signals.

PROTECTION MODES (optional)

Your air-conditioner includes several automatic protection modes which enables you to

use it virtually at any time and in any season regardless of the outdoor temperature. Some

of the protection modes are listed below:

Mode Operations

conditions

Protection

from

Controlled remedy

Cool and Dry Low outdoor

temperature

Indoor coil

freezes up

Stops outdoor fan and

compressor when approaching

freezing conditions Resumes

operation automatically.

Operating indicator blinks

High outdoor

temperature

Outdoor coil

overheating

Stop compressor when

approaching over heating

conditions. Resumes operation

automatically. Operating

indicator blinks

Heating Low outdoor

temperature

Outdoor coil

ice build up

Reverses Operation from

heating to cooling for short

periods to de-ice outdoor coil.

Operating indicator blinks

High Indoor

or outdoor

temperature

Indoor coil

overheating

Stops outdoor fan and

compressor when approaching

high indoor coil temperature.

Resumes operation

automatically. Operating

indicator blinks

Note: When switching the unit to OFF after heating operation,the unit may perform outdoor

coil deicing operation. In such a case, the compressor will continue to run for some time

after the uit has switched to OFF, and the indoor unit louvers are closed. This feature is a

part of the normal unit operation

HOW TO CLEAN THE FLAT PANEL

The at panel must be cleaned by soft cloth with water or mild

cleanser.

Avoid using abrasive or corrosive cleanser .

Never apply any chemical for cleaning.

HOW TO REMOVE THE PANEL

Open the front panel and push it to the right, then pull out the

right crank, and then pull the front panel to the left and take it

out from the front frame.

CLEANING THE AIR FILTER

To remove the air lters, lift up the panel, push the air lters

up slightly to unlock them, pull out the lters, clean the lter by

washing in warm soapy water and dry thoroughly. Align and t

the lters in place. Close the panel by pushing it in the center

to lock it in place.

If your air conditioner is provided with a lter cleaning indicator,

when the indicator lights up,you should remove the lters for

cleaning, then use the Reset button to return off the indicator

after cleaning.

DO NOT OPERATE THE UNIT WITHOUT FILTERS!

PURIFIC ATION FILTER REPLACEMENT

The air purifying filter should be removed from the unit and

replaced once a year, show as following:

1 Pulling out the lter.

2 Replacing the lter in its place.

Note: The above procedure is used for replacing the active

carbon lter (when supplied).

CARE AND MAINTENANCE

Before performing any maintenance procedure, make

sure to disconnect the air conditioner from the power.

Air filter

Air purifying filter

CARE AND MAINTENANCE

CLEANING THE AIR CONDITIONER

Wipe the unit with a soft dry cloth or clean it using a vacuum●

cleaner.

Do not use hot water or volatile materials which could●

damage the surface of the air conditioner.

AT THE BEGINNING OF THE SEASON

Make sure there are no obstacles blocking the ow of inlet ●

or outlet air, in both indoor and outdoor units.

Make sure the power is properly connected.●

PROTECT THE ELECTRONIC SYSTEM

Indoor unit and remote control must be at least 1 meter●

away from a TV, radio or any other home electronic

appliance.

Protect the indoor unit from direct sun or lighting.●

CARE AND MAINTENANCE

TROUBLESHOOTING

Problem Cause Remedy

Unit does not●

operate. Stand-by

indicator does not

light up

Unit not connected to●

power

Power failure●

Plug in the power cord●

Check main fuse●

Unit does not●

operate. Stand-by

indicator lights.

Remote control●

malfunctions

The remote control is●

locked

Check remote control●

batteries

Try to operate from a closer●

distance

Start from on-unit controls●

Unlock the remote control●

Unit does not respond●

properly to remote

control command

IR signal does not●

reach unit

Distance between●

remote control and

unit too large or aimed

at from improper

angle

IR receiver on-unit●

exposed to strong

light source

Check for obstruction between●

unit and remote control. Clear

if needed.

Get closer to unit.●

Dim lights, fluorescent●

especially

Air does not blow out●

from indoor unit

De-icing protection●

mode is activated

Unit in AUTO FAN●

mode

Over cooling in DRY●

Normal operation in HEATING●

mode

Normal operation in DRY●

mode

COOLING, DRY or●

HEATING does not

start immediately

3-min. Compressor●

delayed start

Normal operation for these●

modes

Unit functions but●

does not perform

sufficiently

Improper temperature●

setting

Unit capacity in●

sufficient for load or

room size

Reset temperature●

Consult your dealer●

Before calling for service, please check the following common

malfunctions and correct it as needed.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Airwell Klimaanlage Handbücher

Airwell

Airwell DS 18 RCG Bedienungsanleitung

Airwell

Airwell MFH Leitfaden

Airwell

Airwell AWSI-HGD009-N11 Bedienungsanleitung

Airwell

Airwell CKV007 Bedienungsanleitung

Airwell

Airwell FSF045 Bedienungsanleitung

Airwell

Airwell DS48RCF Bedienungsanleitung

Airwell

Airwell HDL Bedienungsanleitung

Airwell

Airwell YAV112 Bedienungsanleitung

Airwell

Airwell WNG9 Bedienungsanleitung

Airwell

Airwell IU-MINV-HW-9H Bedienungsanleitung

Airwell

Airwell CD35 Handbuch

Airwell

Airwell AW-CDV09/07-N11 Leitfaden

Airwell

Airwell XLM36IRCB Technisches Datenblatt

Airwell

Airwell AWSI-HKD009-N11 Bedienungsanleitung

Airwell

Airwell FBF030 Bedienungsanleitung

Airwell

Airwell HDLA R32 Series Leitfaden

Airwell

Airwell AWAU-YWC220-H13 Bedienungsanleitung

Airwell

Airwell CCD Bedienungsanleitung

Airwell

Airwell HVVA-025N-01M22 Bedienungsanleitung

Airwell

Airwell VVWO Series Bedienungsanleitung

Airwell

Airwell RC3-LCD Bedienungsanleitung

Airwell

Airwell K 9 OG LN Handbuch

Airwell

Airwell ST-NKFL 7R Bedienungsanleitung

Airwell

Airwell AWSI-HDDE009-H11 Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung