Airzone ZS6 Bedienungsanleitung
Content
ENVIRONMENTAL POLICY_________________________________________________________________________ 3
AIRZONE INTERFACES _____________________________________________________________________________ 4
>Airzone Blueface zero___________________________________________________________________ 4
>Screensaver__________________________________________________________________________ 4
>Main screen__________________________________________________________________________ 4
>HVAC control_________________________________________________________________________ 5
>Operation mode_____________________________________________________________________ 5
>User mode ___________________________________________________________________________ 5
>Zone navigation_____________________________________________________________________ 6
>Local ventilation ____________________________________________________________________ 7
>Airow control_______________________________________________________________________ 7
>User settings ________________________________________________________________________ 7
>Airzone Think _____________________________________________________________________________ 8
>Screensaver__________________________________________________________________________ 8
>Main screen__________________________________________________________________________ 8
>Navigation ___________________________________________________________________________ 9
>Adjusting the temperature _______________________________________________________ 9
>Settings menu_______________________________________________________________________ 10
>Airzone Lite________________________________________________________________________________ 11
>Basic functions______________________________________________________________________ 11
>Change of battery________________________________________________________________________ 12
INCIDENTS ____________________________________________________________________________________________ 13
>Warnings___________________________________________________________________________________ 13
>Errors _______________________________________________________________________________________ 14
EN
3
Environmental policy
• Never dispose of this equipment with household waste. Electrical and electronic
products contain substances that can be harmful to the environment if not
properly handled. The crossed-out waste bin symbol indicates separate collection
of electrical devices, which must be separated from other urban waste. For correct
environmental management, at the end of its useful life the equipment should be
taken to the collection centers provided for this purpose.
• The parts that make it up can be recycled. Therefore, please respect the regulations
in force regarding environmental protection.
• If you replace the equipment, the original equipment must be returned to your
dealer or deposited at a specialized collection center.
• Violations are subject to the penalties and measures stipulated in environmental
protection law.
EN
4
EN
Airzone Interfaces
AIRZONE BLUEFACE ZERO
Screensaver
Main screen
Airow control
Set point
temperature
Advanced settings*
User settings
On/Off
Local ventilation
Operation
mode
User mode
Zone navigation
Room temperature
Relative humidity
Time and date*
Room temperature
On/Off
Zone name
Relative
humidity
Operation mode
*Note: If the system has Webserver, weather information will also appear.
Zone demand
*Note: To access the advanced settings, please refer to the Quick Guide of your system (ZS6 or
S62).
5
EN
Auto. The Auto mode allows automatic switching between cool and heat, depending on
the global demand.
On/Off. Pressing the icon turns the zone in which the thermostat is located on or off.
Cooling. In this operation mode, the system only operates with the AC unit in cooling
mode when any of the zones associated to the system is generating demand (set point
temp. < room temp.).
Heating. In this operation mode, the system only operates with the AC unit in heating
mode when any of the zones associated to the system is generating demand (set point
temp. > room temp.).
Dry. In this operation mode, the system only operates with the AC unit in dry mode,
refreshing the environment and prioritizing the operation to reduce humidity, when any of
the zones is generating demand (set point temp. < room temp.).
Note: This mode is ideal for days when humidity is high: it reduces the occurrence of water
particles on the grilles.
This is managed from the master thermostat, press to access the selection menu. The available
modes are as follows:
HVAC control
Operation mode
Set point temperature. Using the - and + signs that appear when you press on the
temperature, you can select the desired set point temperature, in steps of 0.5°C (1 °F). The
temperature range permitted in heating mode is: 15 – 29 °C (59 – 84 °F). In cooling mode:
18 – 30°C (64 – 86 °F).
Emergency heat. This mode activates the Auxiliary Heat to provide heated air in case of a
mechanical failure in the system.
Note: This mode is only visible when the installation includes an auxiliary heating device.
User mode
This option is only available in the Blueface zero Thermostat.
Comfort. Default and standard user mode. The desired set point temperature can be
selected using the predened temperature ranges.
Eco. The range of available set point temperatures change for more efcient operation.
Night time. The system automatically changes the set point temperature 0.5 ºC (1 ºF) every
30 minutes in up to 2 ºC (4 ºF) in 2 hours. When cooling, the system increases the set point
temperature; when heating, the system decreases the set point temperature.
72°
6
EN
Unoccupied. This mode aims to short periods of absence. Avoids the temperature to
surpass the established limit temperature for cooling and heating mode, generating
demand with a set point temperature previously established by the installer (27 ºC (81 ºF)
in cooling mode and 17.5 ºC (63 ºF) in heating mode by default) for returning to the allowed
values, as long as the zone is on.
When interacting with the zone while this mode is selected, the controller displays the
unoccupied override warning. If the set point temperature is changed, it is maintained for
the pre-established period of time.
Vacation. This mode aims to long periods of absence. It turns off all the zones to save
energy and turns them on avoiding the temperature to surpass the established limit
temperature (35 ºC (95 ºF) in cooling mode and 10 ºC (50 ºF) in heating mode), generating
demand with the previous set point temperature before activating the vacation mode.
When interacting with the zone while this mode is selected, the controller displays the
vacation override warning. If the set point temperature is changed, it is maintained for the
preestablished period of time (60 minutes by default) and turns off the zones again.
Stop. The air-conditioning system will remain switched off regardless of the demand status
of any zone, all the motorized dampers will remain opened.
Zone navigation
Access to all
the zones
Zone set point
temperature
Access to the zone
Zone room
temperature
Switch all the
zones on or off
Return to the
main screen
Switch the zone
on or off
Zone navigation
The “All zones” option allows you to control all the zones at the same time, communicating the
changes to all of them.
Press the name of a zone to control it remotely from the thermostat. When the system detects
a temperature error in a specic zone, the zone displays the error code instead of the room
temperature (see Incidents section).
Remote zone navigation icons:
Return to the zone navigation list.
Return to the main screen.
7
EN
Select the control algorithm that best ts the installation. The available options are:
Airflow control
Silence. The fan speed is lower than in standard mode to reduce the noise.
Standard. Set by default. The system automatically regulates the fan speed based on the
number of zones calling for cooling or heating.
Power. The fan speed is higher than in standard mode to increase the ow.
User settings
Units. Select Celsius or Fahrenheit degrees.
Language. Select the language.
Brightness. Adjust the brightness, and enable or disable the screen brightness when the
screen saver is active.
Information. This parameter provides information on:
• Zone: rmware, zone, association, actuator or status of the communications.
• System: rmware, settings and information about the system controllers.
• Devices: It displays the elements connected to the system.
• Webserver: conguration, association, IP Direction and MAC.
• Errors.
Local ventilation
This option enables the activation or deactivation of the ventilation in the selected zone
when the system is not actively cooling or heating any of the zones.
Important: In Heat Pump installations, it is recommended not to activate the global and local
ventilation in an Airzone system connected to the master indoor unit. It may cause the Stop
user mode to turn off the rest of the Airzone system.
8
EN
AIRZONE THINK
Screensaver
Date*
Zone
status
Main screen/
conrm
Control bar
On/Off
*Note: If the system has Webserver, weather information will also appear.
Main screen
Control bar
Timer
On/Off
Zone
Room temperature
Relative humidity
Settings menu
Operation mode
User mode Airow
control
Set point
temperature
Access the main screen by pressing "Airzone" from the screensaver:
Local ventilation
Main screen/
conrm
Communication frequency:
- 868.12 MHz (CEE)
- 915.2 MHz (EEUU, Canada, Australia, New Zeland)
Maximum radiated power: 0dBm
Zone
demand
9
EN
On/Off. Press to turn the zone On/Off.
Adjusting the temperature
Temperature control.The temperature displayed on the screen is the current set point
temperature. Adjust the set point temperature on the Think Thermostat following the next
instructions:
Select the set point temperature using the control bar (by pressing or by sliding)
to manually adjust by increments of 0.5 ºC (1 ºF). Press once to adjust the set point
temperature by increments of 0.5 ºC (1 ºF). Slide to adjust the set point temperature in
larger steps. The permitted temperature range is:
• Heating Mode: 15 ºC – 29 ºC (59 – 84 °F).
• Cooling Mode: 18 ºC – 30 ºC (59 – 86 °F).
Note: Press the Airzone button to switch between heat and cool set point temperatures.
There is a minimum difference allowed between heating and cooling set point
temperatures. The system will prevent setting a temperature within the protection range.
72°
Navigation
To navigate through Wireless Thermostat, follow the instructions you will see on the screen.
Press the side buttons on the control bars to execute the instructions.
10
EN
Local ventilation. This option enables the activation or deactivation of the ventilation
in the selected zone when the system is not actively cooling or heating any of the zones.
Important: In Heat Pump installations, it is recommended not to activate the global and
local ventilation in an Airzone system connected to the master indoor unit. It may cause
the Stop user mode to turn off the rest of the Airzone system.
Settings menu
Timer. It is an auto power-off timer of the zone:
Off. Timer is not activated.
30. Thirty minutes after its activation, the zone will turn off.
60. Sixty minutes after its activation, the zone will turn off.
90. Ninety minutes after its activation, the zone will turn off.
Information. This parameter provides information on:
• Zone: rmware, zone, association, actuator or status of the communications.
• System: rmware, settings and information about the system controllers.
• Devices: It displays the elements connected to the system.
Zone navigation. This parameter is only available when there is an error with the master
Blueface zero thermostat. Access and modify the set point temperature, mode, user mode and
ow rate parameters via the "all zones" option.
Andere Handbücher für ZS6
2
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Sprachen:
Andere Airzone Steuerungssystem Handbücher
Airzone
Airzone VAF BLUEFACE Bedienungsanleitung
Airzone
Airzone RADIANT365 Bedienungsanleitung
Airzone
Airzone iQ Zone Bedienungsanleitung
Airzone
Airzone UNO PACK Bedienungsanleitung
Airzone
Airzone FLEXA 3.0 IBPRO6 Bedienungsanleitung
Airzone
Airzone RADIANT365 Bedienungsanleitung
Airzone
Airzone VAF AZVAFCB Series Bedienungsanleitung
Airzone
Airzone RADIANT365 Bedienungsanleitung
Airzone
Airzone EASYZONE AZEZ6FUJST Bedienungsanleitung
Airzone
Airzone Aidoo Pro Bedienungsanleitung
Airzone
Airzone ZS6 Bedienungsanleitung
Airzone
Airzone ZBS Bedienungsanleitung
Airzone
Airzone VAF BLUEFACE Bedienungsanleitung
Airzone
Airzone RADIANT365 Bedienungsanleitung
Airzone
Airzone AZX6CCPWSCC Bedienungsanleitung
Airzone
Airzone Aidoo Z-Wave Plus AZAI6ZW Series Gebrauchs- und Pflegehandbuch
Airzone
Airzone Flexa 4.0 Bedienungsanleitung
Airzone
Airzone Lutron Bedienungsanleitung
